Traxxas

 Talon assembled and glued 2.8" tire sets make it easy to maintain peak performance. Talon tires are proven to provide "just-right" grip and handling on a wide variety of surfaces. Soft rubber...

Includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware) (grill sold separately.

Body, Bigfoot® No. 1, Officially Licensed replica (painted, decals applied)Replacement part for these models:Bigfoot® No. 1 Officially Licensed Replica

.

Body, Bigfoot®, Officially Licensed replica (clear, requires painting)/ window masks/ decal sheetAccessory part for these models:Bigfoot® No. 1 Officially Licensed ReplicaBigfoot® Officially Licensed...

.

FEATURES: Gray plastic construction INCLUDES: Two wheel hubs Two 2.5mmX12mm axle pins SPECS: Hex size: 12mm Width: .32" (8mm)

Body, Bigfoot® Flame, Officially Licensed replica (painted, decals applied)Replacement part for these models:Bigfoot® No. 1 Officially Licensed Replica

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

Traxxas aluminum stub axle carriers add both strength and beauty. In addition to the durability and precision of the machined billet 6061-T6 aluminum, larger 5x11mm ball bearings are included for...

FEATURES: Made of a black plastic/nylon material. Also called the rear hub or hub carrier. Has 2 possible mount locations for the outer hinge pin shaft. INCLUDES. 2 Stub alxe carriers. COMMENTS: This...

Body, Stampede, Hawaiian graphics (painted, decals applied) Accessory part for these models: Stampede

.

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two 61mm (96mm center to center) turnbuckles REQUIRES: Installation on the vehicle

Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)Accessory part for these models:Bigfoot® No...

Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1)Accessory part for these models:Bigfoot® No...

FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two front 39mm (69mm center to center) turnbuckles and instruction sheet REQUIRES: Installation on the...

#2579 3x15 BCS (4) (required for installation)(sold separately)Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)TUBES...

#2579 3x15 BCS (4) (required for installation)(sold separately)Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)TUBES...

#2579 3x15 BCS (4) (required for installation)(sold separately)Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)TUBES...

Fits Continued: 1/10 Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler / T-Maxx Classic FEATURES: Black steel construction Screws are half-threaded/half-smooth Phillips head INCLUDES: Six...

FEATURES: Grey Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS: Short Length: 77 mm (3.03") Width: 9 mm (0.354") Height: 4 mm (0.157") Long Length: 90 mm (3.54") Width: 9 mm...

FEATURES: Black Plastic Construction INCLUDES: Two Short Links Two Long Links SPECS: Short Length: 77 mm (3.03") Width: 9 mm (0.354") Height: 4 mm (0.157") Long Length: 90 mm (3.54") Width: 9...

FEATURES: Durable steel construction INCLUDES: Two 48mm pins Two 34mm pins Two 30mm pins Two 28mm pins Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

FEATURES: Made from black molded nylon For the Traxxas Stampede SPECS: Height: 2 3/4" Thickness: 1/4" Width at base: 2 3/4" Width at top: 2"

FEATURES: Steel construction Natural color INCLUDES: Two front axles REQUIRES: Nothing. These are direct replacement parts. SPECS: Length: 32mm (1.26") Diameter: 5mm

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball...

.

FEATURES: T-6061 aluminum construction, green in color INCLUDES: One Left and Right Alloy Steering Block Four 5x11mm Ball Bearings

Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball...

PACKAGE INCLUDES: Two steering blocks (one left and one right)

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

.

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

Traxxas aluminum caster blocks improve the appearance, ruggedness, and control on the your Traxxas model. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the...

FEATURES: Black Plastic Construction INCLUDES: Two Blocks  

FEATURES: Properly seals receiver box to minimize dirt and moisture exposure INCLUDES: Silicone grease One Gasket Two Foam Strips Instructions REQUIRES: Application to receiver box

FEATURES: Nylon construction Black in color INCLUDES: One Receiver Box One Rubber Seal Foam Padding Two 2.5x8mm Cap Head Screws Two 3x10mm Cap Head Screws Two 2.5x10mm Cap Head Screws One Tube of...

FEATURES: Plastic construction, gray in color Metal posts and body clips INCLUDES: One battery hold down One receiver hold down Two metal posts Two body clips Servo tape/adhesive foam pad  

FEATURES: Plastic construction, blue in color INCLUDES: Front Bumper with Mount and Mounting Screws

.

.

Traxxas Front/Rear Body Mounts/Posts

FEATURES: Clear lexan construction Pre-trimmed INCLUDES: One clear body One decal sheet with window, grill and lights decals REQUIRES: Body Mounts, Polycarbonate Paint SPECS: Length: 16.5" (419.1mm)...

These are constructed of black plastic and are the posts that the lexan truck body attaches to. PACKAGE INCLUDES: One front body mount One rear body mount COMMENTS: Does not include body clips

FEATURES: Clear silicone construction INCLUDES: One Silicone Tube SPECS: Length: 203mm (8") Inner diameter: 8mm (0.32") Outer diameter: 14mm (0.55")

Display your Traxxas boat when it is not on the water with this Boat Stand from Traxxas. FEATURES Black plastic construction Four...

.

Dual cooling fan kit (with shroud), Velineon 1200XL motor

Cooling fan kit (with shroud), Velineon® 540XL motorReplacement part for these models:Maxx®

Heat sink, Velineon® 540XL motorReplacement part for these models:Maxx®

Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx®)Replacement part for these models:Maxx®

Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)Accessory part for these models:Hoss™ 4X4 VXL

.

Body reamer (aluminum handle)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBigfoot®...

.

Traxxas 3426 Rubber Pit Mat – 36" x 20" x 0.25"Keep your workspace clean and organized with the Traxxas 3426 Rubber Pit Mat. Designed for hobbyists, this durable, non-slip mat provides a stable...

Traxxas Tool Kit                               The Perfect Companion The new Traxxas Tool Kit includes...

Traxxas Tool Kit                               The Perfect Companion The new Traxxas Tool Kit includes...

This is the Traxxas Velineon® VXL-3m forward/reverse brushless electronic speed control/Velinion 380 motor combo, and is intended for use with 1/16 scale vehicles. The Velineon ESC simplifies...

his is the Heat Sink for the Velineon 1600XL Brushless Motor used on the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES Aluminum...

FEATURES Auto detects brushed, brushless or sensored brushless motor types Compatible with 4-cell NiCd or NiMH batteries up to 3S LiPo packs (11.1V) EZ-Set(R) one-touch push-button...

This is the Rebuild Kit for the Traxxas Velineon 3500kV Brushless Motor.       FEATURES Restores like new performance to the...

NEWEST VERION..NOW WITH 4 POLE! This is the Traxxas Velineon Extreme Brushless Waterproof Power System for electric powered R/C vehicles. FEATURES ...

.

FEATURES: Steel construction INCLUDES: Six 3x8mm Washer Head Self Tapping Screws REQUIRES: Phillips screwdriver SPECS: Length: 8mm Diameter: 3mm

Fits Continued: 1/10 Maximum Destruction / Monster Mutt / Jato 3.3 Features: strong steel designSpecifications: 2.5x10mm sockethead screwIncludes: Six 2.5x10mm sockethead screws

.

.

FEATURES: Steel construction Phillips drive Flanged pan head INCLUDES: (6) Screws SPECS: Diameter: 3mm Length: 8mm  

FEATURES: The collars are made of aluminum The set screws are made of durable metal INCLUDES: (2) screw collars (2) 3mm set screws

FEATURES: stainless steel construction phillips drive replacement screws used on the Traxxas LS-II INCLUDES: (6) Screws SPECS: Size: 3x12mm COMMENTS: when screwed-in the head of the screw is usually...

FEATURES: Metal construction Countersunk (flat head) machine screws Phillips drive insert Replacement parts designed for the Traxxas Nitro Hawk INCLUDES: Six Screws SPECS: Length: 10mm Diameter: 3mm

FEATURES Plastic constructionPrewired On/Off switch   INCLUDES 4-Cell AA Battery Holder with On/Off Switch

.

FEATURES: Sturdy silicone construction INCLUDES: One 2' length of fuel line SPECS: Inside diameter: 3/32" (2.5mm) Outside diameter: 3/16" (5mm) Length: 2' (610mm)  

INCLUDES: 2 pieces of fuel tubing. SPECIFICATIONS:  Length: each piece is 6" long Inside diameter: 2mm

FEATURES: Aluminum construction Anodized Red INCLUDES: Two assembled turnbuckles REQUIRES: Installation, 5mm Wrench

FEATURES: Aluminum construction Anodized Blue INCLUDES: Two assembled turnbuckles REQUIRES: Installation, 5mm Wrench

.

Electronic Speed Control, LaTrax®, waterproof (assembled with bullet connectors)Replacement part for these models:1/18 LaTrax® Desert Prerunner1/18 LaTrax® Teton

FEATURES: Nylon construction Black in color INCLUDES: One 4 cell AA Battery Holder w/Futaba Connector REQUIRES: Assembly onto Vehicle

This high quality five-cell receiver battery pack uses proven nickel-metal hydride cells and is rated at 1200 mAh. Fully charged, it provides about 1-2 hours of run time. Heavy-duty wiring provides...

.

.

.

FEATURES Connects receiver batteries to chargers with molex output connector   INCLUDES Molex to Receiver Pack Charge Adapter   SPECIFICATIONS Length: 2.8" (71mm) not...

XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)

.

Battery/charger completer pack (includes #2969 2-amp NiMH peak detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH battery (1))   Traxxas 7-Cell NiMH battery and 2-Amp AC charger for...

This is the Traxxas DC Powered 2 Amp NiMH Battery Charger. FEATURES Charges 5-6 cell, 6.0-7.2V NiMH batteries only (will not charge LiPos) LED...

  This is the Traxxas AC Powered EZ-Peak Plus Battery Charger with iD Auto Battery Identification. FEATURES Charges 2-3S LiPo...

Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)

FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings MAXX...

FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers...

This is the Traxxas 7-Cell 8.4V 4200mAh 4 Series iD Power Cell NiMH Stick Battery Pack. FEATURES New high current connector with gold-plated...

This is the Traxxas 6-Cell 7.2V 3300mAh iD Power Cell NiMH Stick Battery Pack. FEATURES New high current connector with gold-plated copper...

Adapter, Traxxas iD LiPo battery (adapts Traxxas iD batteries to separate balance ports) Traxxas Balance Lead Adapter enables customers to connect their Traxxas iD batteries to accessory cell...

This is the Traxxas 7-Cell 8.4V 3000mAh Power Cell NiMH Hump Pack with iD Connector. FEATURES New high current connector with gold-plated copper...