Traxxas

FEATURES Molded composite plastic construction with thin foam strip to cushion battery Holds both batteries in place on the top chassis...

Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2) 

    FEATURES One-piece molded composite plastic construction Installs between skid plate and lower bulkhead to help hold front and...

These are the Front and Rear Body Mounts for the Traxxas X-Maxx Monster Truck     FEATURES One-piece molded composite plastic...

.

X-Maxx tailgate protector, insert, and 3x8mm flathead hardware. Provides additional strength for rear and corners of X-Maxx for added durability.

X-Maxx ProGraphix Body w/ Decal Sheet - Pre-cut  

Body, X-Maxx®, Rock n' Roll (painted, decals applied) (assembled with tailgate protector)

X-Maxx Clear Body w/ Decal Sheet - Pre-cut Requires: Paint

Body reinforcement set (fits #7711 body)Accessory part for these models:X-Maxx

Tires and wheels, assembled, glued (SCT red wheels, SCT off-road racing tires)                                 ...

Tires and wheels, assembled, glued (SCT orange wheels, SCT off-road racing tires)                              (1 each,...

Tires and wheels, assembled, glued (SCT blue wheels, SCT off-road racing tires) (1 each, right & left)Replacement part for these models:1/18 LaTrax Desert PreRunner 

Wheel nut washer, machined aluminum, red / 3x12mm CS (4)

Wheel nut washer, machined aluminum, blue / 3x12mm CS (4)

FEATURES Replaces stock plastic body shocks-more rugged with better stability and handling, and better damping over jumps and bumps PTFE-coated...

.

FEATURES Rebuilds two shocks   INCLUDES Two each, Bladders, Pistons, Shaft Guides, Caps, Rod EndsFour Clips

INCLUDES2 x Shocks, oil-filled (assembled with springs)

.

.

FEATURES Composite plastic constructionTransfers power from differentials to wheels   INCLUDES Two Front or Rear Driveshaft Assemblies

FEATURES Metal constructionStock replacement pinion gear   INCLUDES 10 Tooth Pinion GearSet ScrewTwo 3x4mm Phillips Head ScrewsMetal Plate

.

FEATURES Composite plastic constructionStock replacement spur gear   INCLUDES 60T Spur Gear

FEATURES Molded plastic construction, blue in color   INCLUDES Front and Rear Shock Tower with black plastic Braces

FEATURES Plastic constructionNon-adjustable   INCLUDES Four Camber LinksTwo Toe Links

FEATURES Plastic construction, black in color   INCLUDES Front and Rear Bumpers for the Teton Monster Truck

FEATURES Composite plastic constructionFastens to front or rear bulkheads   INCLUDES Two Front or Rear Suspension Arms

.

Body, LaTrax Desert PreRunner, color burst (painted)/ decalsAccessory part for these models:1/18 LaTrax Desert PreRunner

FEATURES Plastic construction, black in colorInstalls in shock towers and holds front and rear of body in place   INCLUDES Front and Rear Body Mounts for the Teton Monster Truck

FEATURES Clear molded polycarbonate construction Trimmed out wheel arches and body post holes   INCLUDES ...

.

 

Compatible Products Traxxas Pivot Balls, Black 6pc, Silver 2pc: LaTrax TRA7540 is compatible with TRA76054T1, TRA76054T2, TRA76054T3, TRA76054T4

.

FEATURES Replaces worn bellcranks and related components to restore propersteering and control   INCLUDES Two Bellcranks, Servo Saver, Spring, Spring Retainer, Draglink andtwo Posts

This is an optional LaTrax Carbon Fiber Conversion Kit, intended for use with the LaTrax 1/18 Rally Car. This kit includes the carbon fiber chassis, upper chassis, battery hold down, adhesive foam...

Included: 1 x LaTrax Rally Orange Body Painted 1 x LaTrax Rally Decal Sheet

Plate, motor, redAccessory part for these models:Rustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 Ultimate

Plate, motor, greenAccessory part for these models:Ford Fiesta® ST RallyRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4Ford Fiesta® ST Rally

Plate, motor, orangeAccessory part for these models:Rustler® 4X4 VXLRustler® 4X4Slash 4X4 PlatinumSlash 4X4 Ultimate

FEATURES: Aluminum construction, anodized blue in color INCLUDES: Aluminum Motor Plate  

FEATURES: Made of black plastic. INCLUDES: One cover gear One wire retainer

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

This is a pair of two replacement Traxxas Pre-Mounted BFGoodrich Rally Tires, mounted on Rally 12-Spoke Wheels. These tires are fully assembled, glued, include foam inserts and are ready for...

FEATURES: Tread pattern designed for use in gravel Twelve spoke design, white in color INCLUDES: Two Rally Gravel Pattern Short Course Tires with Foam Inserts and Wheels SPECS: Diameter: 4.26"...

This is a pack of two replacement Traxxas Green Wheels, and are intended for use with the Traxxas 1/10 Rally Racer. These wheels can be used in the front or rear of the vehicle.

.

FEATURES: Tread pattern designed for use in gravel Rubber construction INCLUDES: Two Rally Gravel Pattern Short Course Tires with Foam Inserts REQUIRES: Short Course truck wheels Tire Glue SPECS:...

Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))Replacement part for these models:Slash 4X4 UltimateUnlimited Desert...

.

Body, GTR xx-long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler 4X4 VXL

.

.

FEATURES Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES Two XX-Long Traxxas GTR Shocks Bottle of Silicone Shock...

Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these...

FEATURES Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES Two Long Traxxas GTR Shocks Bottle of Silicone Shock...

Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)Replacement part for these models:Slash 4X4 UltimateAccessory part for these models:Rustler...

Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)

This is the set of Traxxas Extra Extra Long GTR Shock Springs with 1.004 Blue Compression Rate. FEATURES Steel construction, white...

This is the set of Traxxas Long GTR Shock Springs with 0.892 Blue Compression Rate. FEATURES Steel construction, white in...

Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)

.

Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)

Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)

.

FEATURES: Made of black plastic. INCLUDES: One skid plate SPECS: Length: 3-11/16" (68mm) Width: 5-3/4" (146mm) Height: 1-1/8" (29mm)

FEATURES: Foam construction, black in color Installs on chassis underneath front of body to help absorb frontal impacts INCLUDES: Body Bumper Foam for the Traxxas 1/10 scale Rally Car SPECS: Width: 7...

Skidplate, front (angled for higher ground clearance) (use with #7434 foam body bumper)

Body bumper, foam (low profile) (use with #7435 front skidplate)

Bulkhead, frontReplacement part for these models:Ford Fiesta® ST RallyRally VXLRustler 4X4 VXLRustler 4X4Slash 4X4 PlatinumSlash 4X4 UltimateSlash 4X4

FEATURES: Made of black plastic INCLUDES: One bulkhead SPECS: Length: 3" (76mm) Width: 2-13/16" (71mm) Height: 2" (51mm)

FEATURES: Made of black plastic. INCLUDES: One battery hold-down One tall front hold-down retainer One tall rear hold-down retainer SPECS: hold-down, length: 7-5/8" (194mm) width: 1-1/4" (32mm)...

FEATURES: Made of black plastic INCLUDES: Three different pieces COMMENTS: This battery holder is a replacement part.

FEATURES: Plastic construction, black in color INCLUDES: Upper and lower Case Halves with Wire Cover Gasket Two Foam Pads Two 3x12mm Button Head Cap Screws Two 3x6mm Button Head Cap Screws Two 2...

  Slash 4X4 Low-CG (Low Center of Gravity) Conversion Kit Everything to convert your Slash 4X4 Performance-proven by the Slash 4X4 Ultimate and 1/10 Rally, the Traxxas Low-CG chassis is...

FEATURES Constructed of plastic, black in color INCLUDES Front and Rear Body Mounts

Wing, Ford Fiesta® ST Rally (black)/ 3x8 FCS (4)

FEATURES: Blue aluminum construction          Holds 550 size motor in placeINCLUDES: One motor plate

.

FEATURES: Foam construction          Black in colorINCLUDES: One foam body bumper

Tires and wheels, assembled, glued (Geode black, beadlock style wheels, Canyon AT tires, foam inserts) (1 left, 1 right)Accessory part for these models:1/16 Summit VXL1/16 Summit

FEATURES: GTR shock springs for the 1/16 Summit          Steel constructionINCLUDES: Two SpringsREQUIRES: Installation onto shocksSPECS:   ...

Body, 1/16 Summit (painted, decals applied)Replacement part for these models:1/16 Summit

.

FEATURES: Nylon construction          White in colorINCLUDES: One Wing          Decal SheetREQUIRES:...

FEATURES: Nylon construction          Black in colorINCLUDES: One Wing Mount          Two 2.9x9.75mm Button...

Body, Mike Jenkins #47, 1/16 Slash (painted, decals applied)

This is the Traxxas Titan 380 18 Turn Brushed Motor.FEATURES: 18 turn, used in Traxxas 1/16 scale vehiclesINCLUDES: One Titan 380 Motor with 4mm bullet connectors

FEATURES: Steel construction, black in colorINCLUDES: Two Drive Cups

.

FEATURES: Nylon construction          Red in colorINCLUDES: Two Front and two Rear Toe Links          Eight...