Traxxas

Shock tower, front, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, front, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, frontReplacement part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rear, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1) Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rear, 7075-T6 aluminum (green-anodized) (1)/ body mount bracket (1)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Shock tower, rearReplacement part for these models:Rustler 4X4 VXLRustler 4X4

Bumper, front/ bumper supportReplacement part for these models:Rustler 4X4 VXL

.

FEATURES: Black plastic construction INCLUDES: Rear suspension arm guards (2) Guard spacers(2) Hallow Balls (2) 3x16mm BCS (2) REQUIRES: Installation on vehicle

FEATURES: Composite plastic construction Black in color INCLUDES: Two front suspension arm guards Two guard spacers Two hollow balls Eight 3x16mm button head cap screws REQUIRES: Installation onto...

Suspension arms, front/rear (left & right) (2)Replacement part for these models:Ford Fiesta® ST RallyTelluride 4X4

Skid plate, roof (body) (blue)/ 3x12mm CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body) (red)/ 3x12mm CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body) (green)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body) (white)/ 3x12 CS (4)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Skid plate, roof (body)/ 3x12mm CS (4)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

FEATURES: Composite construction Allows installation of taller multi-cell batteries INCLUDES: Battery Hold Down with metal Post and Body Clip REQUIRES: Fastening to chassis

FEATURES: Composite construction Holds stock 7-cell battery supplied with vehicle INCLUDES: Two battery Hold Down sections with metal Post and Body Clip REQUIRES: Fastening to chassis COMMENTS: Also...

Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screwReplacement part for these models:Rustler® 4X4 VXLRustler® 4X4

Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (blue)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (orange)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (red)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (green)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Wing, Rustler® 4X4 (white)/ 3x8 FCS (3)Accessory part for these models:Rustler 4X4 VXLRustler 4X4

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)Replacement part for these models:Rustler 4X4 VXLRustler 4X4

Body support/ 3x12mm CS (4)Replacement part for these models:Rustler® 4X4 VXLRustler® 4X4

Body, Rustler 4X4, blue/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Body, Rustler® 4X4 VXL, orange/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Replacement part for these models:Rustler®...

Body, Rustler® 4X4 VXL, pink/ window, grille, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)Replacement part for these models:Rustler®...

Body, Rustler 4X4 VXL, green/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

Body washers, foam, 2mm (2)/ 3mm (2)/ 4mm (4)Accessory part for these models:1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit VXL1/16 SummitBandit VXLBanditBigfoot® No. 1 Officially Licensed...

.

Body reinforcement set (fits #6717 body)Traxxas body reinforcement sets provide added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strength composite reinforcements...

This is the USB Charger for the LaTrax Alias Quad-Copter Includes: 1 x High Output USB Charger

High-Voltage Power AmplifierAccessory part for these models:Unlimited Desert Racer

 

Requires Traxxas OBA system (not included or sold separately). 

MOUNT, TELEMETRY EXPANDER (FITS TRX-4) Accessory part for these models: TRX-4 Assembly Kit TRX-4 Ford Bronco TRX-4 Scale and Trail Crawler TRX-4 Tactical Unit

.

Telemetry expander mount fits XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4. (*requires rear chassis brace #5632)

.

Upgrade Your Traxxas Model with theTQi Telemetry Expander 2.0and GPS Module 2.0!TQi Telemetry Expander 2.0 (#6550X) Contents (Three-Quarter View)Requires the TQi radio system with Wireless Module...

Seal kit, expander box (includes o-ring, seals, and silicone grease) Accessory part for these models: 4-Tec 2.0 AWD Chassis 4-Tec 2.0 VXL AWD Chassis Bandit VXL E-Maxx Brushless E-Maxx E-Revo...

Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM. This system works well for hard surfaces, but wheelspin on loose surfaces causes...

EATURES: Plastic magnet holderINCLUDES: Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

Telemetry trigger magnet holder/ magnet 5x2mm (1)Replacement part for these models:SpartanAccessory part for these models:DCB M41 WidebodySpartan

Phone mount, transmitter (fits TQi and Aton transmitters) The Transmitter Phone Mount provides a secure mounting base for your mobile device on TQi and Aton transmitters. Phone mount, transmitter...

.

This is the Traxxas Auto-Detectable Voltage Sensor. FEATURES Only for use with the Traxxas #6550 Telemetry Expander ...

INCLUDES: TQ 2.4GHz 3-Channel Micro Receiver SPECS: Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm) Weight: 0.35oz (10g)

FEATURES: Steel construction Two different thickness for different surfaces and steering action Silver colored sway bars are thin for rough surfaces with low traction and to reduce understeer Black...

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

This is the stock 18 Tooth Pinion Gear for the Traxxas X-Maxx. FEATURES Hardened steel construction Compatible with steel spur...

FEATURES: 118+mph speed rated belted slicks with foam inserts Dished design black plastic wheels INCLUDES: Two Front Slicks with Foam Inserts and two Wheels SPECS: Outer Diameter: 4.29" (109mm)...

FEATURES: 118+mph speed rated belted slicks with foam inserts INCLUDES: Two Rear Slicks with Foam Inserts REQUIRES: Rear Wheels SPECS: Outer Diameter: 4.29" (109mm) Width: 2" (51mm)

FEATURES: Constructed of 6061-T6 aluminum, anodized blue in color INCLUDES: Four 17mm Splined Wheel Hubs Four Screw Pins

FEATURES: Steel construction INCLUDES: One input shaft One pin COMMENTS: This part is for the innovative new Traxxas cush drive output that cushions the gear drive system and protects critical...

FEATURES: Metal and elastomer construction INCLUDES: One drive pin One drive key One drive damper COMMENTS: This part is for the innovative new Traxxas cush drive output that cushions the gear drive...

FEATURES: Metal construction, blue colored INCLUDES: One motor adapter

FEATURES: Constructed of 6061-T extruded aluminum, anodized blue in color INCLUDES: Center Driveshaft for the Traxxas XO-1

FEATURES: Constructed of 6061-T6 aluminum, anodized blue in color INCLUDES: Two Rear Axle Carriers

FEATURES: Hardened steel construction 6mm diameter at axle pin area INCLUDES: Two 6mm Front Stub Axles

FEATURES: Hardened steel construction 6mm diameter at axle pin area INCLUDES: Two 6mm Rear Stub Axles

FEATURES: Hardened steel construction Steel spline, constant-velocity design INCLUDES: Rear Driveshaft for the Traxxas XO-1

Tooth: 54T Pitch: 1.0 Metric Pitch

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1 On-Road Car

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1 On-Road Car  

FEATURES: Molded plastic construction 1.0 metric pitch INCLUDES: 46T Spur Gear for the Traxxas XO-1 On-Road Car

FEATURES: Molded plastic construction INCLUDES: Bellcrank Brace and Draglink for the Traxxas XO-1

FEATURES: Hardened steel suspension pins Plastic tie bar bushings INCLUDES: Two Front and two Rear Suspension Pins Two Tie Bar Bushings

FEATURES: Constructed of 7075-T6 aluminum, anodized blue in color INCLUDES: Front Shock Tower

FEATURES: 6061-T6 aluminum construction, anodized blue in color INCLUDES: One each Left and Right Steering Blocks REQUIRES: Four 10x15mm Ball Bearings, (2) Four 6x12mm Ball Bearings, (2) 

FEATURES: Dense foam absorbs minor impacts INCLUDES: Foam Front Bumper for the Traxxas XO-1 SPECS: Width: 10.1" (258mm) Thickness: 0.98" (25mm)

FEATURES: Molded plastic construction INCLUDES: Rear Diffuser

FEATURES: Constructed of plastic INCLUDES: Splitter Extension Left and Right Canards Four 4x12mm Countersink Screws Two 3x10mm Countersunk Screws

FEATURES: Molded plastic construction INCLUDES: Splitter Extension with two 3x10mm Countersunk Screws

FEATURES: Made of a black composite material INCLUDES: One splitter mount

FEATURES: Molded plastic construction Holds rear suspension arm hinge pins in place INCLUDES: Rear Bulkhead for the Traxxas XO-1

FEATURES: Molded plastic construction INCLUDES: Two Battery Cup Sections

FEATURES: Molded plastic construction INCLUDES: Two Battery Hold Down Retainers

FEATURES: Molded plastic construction Taller to allow the use of thicker multi-cell batteries INCLUDES: Two optional Tall Battery Hold Downs

FEATURES: Molded plastic construction INCLUDES: Two Battery Hold Downs

FEATURES: Plastic construction with one-piece silicone seal INCLUDES: All Receiver Box Compoments with Foam Mounting Pads, tube of Silicone Grease and Instructions

FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Chassis Brace

FEATURES: Molded plastic construction INCLUDES: Left and Right Tunnels and Vent Cover with one 3x8mm Countersunk Screw

FEATURES: Molded plastic construction INCLUDES: Left and Right Tunnel Extensions

FEATURES: Molded plastic construction INCLUDES: One each Front and Rear Body Mount

FEATURES: Flexible exocarbon construction INCLUDES: Wing Four Plastic Mount Sections SPECS: Width: 11" (275mm) Height: 0.55" (14mm)

FEATURES: Constructed of molded plastic, black in color INCLUDES: Rear Wing with two Mounts and two Washers

.

FEATURES: Mounted Kumho tires with foams on split spoke satin chrome, black beadlock style wheels in plastic INCLUDES: Two mounted Kumho tires with foams Two Split Spoke Satin Chrome, black Beadlock...

FEATURES: 2.3 lb/in tension Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas Slayer Shocks SPECS: Length: 49mm (1.9") Diameter: 22mm (0.87")

FEATURES: Assembled turnbuckles with captured rod ends Steel construction with composite plastic rod ends INCLUDES: Two 72mm turnbuckles with rod ends REQUIRES: Installation onthe vehicle

.

FEATURES: Steel construction Nylon rod ends INCLUDES: Two Assembled Rod Ends REQUIRES: Use with Progressive-2 Rockers SPECS: Length: 91mm (2.58") Diameter: 5mm (0.20")

Gear, center differential (Slayer)/ Cover (1) / X-ring seals (2)/ gasket (1)/ 6x10x0.5 TW (2) (Replacement gear for 5914)

Tires & wheels, assembled, glued (SCT Split-Spoke orange wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated)

Tires & wheels, assembled, glued (SCT Split-Spoke black, satin chrome beadlock style wheels, dual profile (2.2" outer, 3.0" inner), SCT off-road racing tires, foam inserts) (2) (2WD...