Traxxas

FEATURES: Nylon construction Black in color INCLUDES: One Brake Came Lever One Linkage Brake Bellcrank One Brake Bellcrank Rod REQUIRES: Assembly onto Vehicle

FEATURES: Metal Construction Black in color INCLUDES: One Input Shaft (Slipper Shaft) One Slipper Shaft Spacer REQUIRES: Assembly onto Vehicle

FEATURES: Installs on either side of brake disc INCLUDES: Two aluminum brake pads, two 3x15mm socket head screws, C clip, pin, hub and spacer REQUIRES: Installing on brake assembly

FEATURES: Composite construction Grey in color INCLUDES: One Composite Brake Disc REQUIRES: Assembly onto Vehicle  

 Alias and ribbed super soft rubber compound tires feature a non-directional design for no-worry mounting. The ribbed front tire incorporates deep grooved ribs that dig into soft loamy surfaces...

FEATURES: Factory assembled for front installation on the Jato (1.4mm piston), for rear use, the installed pistons must be replaced with included 1.3mm rear pistons INCLUDES: Two GTR Composite...

FEATURES: Metal construction Silver in Color INCLUDES: One Silver Engine Mount Two Engine Mount Spacers Four 3mm x 15mm Socket Head Screws w/Washers Two 4mm x 18mm Button Head Screws Two 3mm x 10mm...

FEATURES: Nylon construction Black in color INCLUDES: One 1.5° Anti-Squat Suspension Pin Mount One 2.25° Anti-Squat Suspension Pin Mount One 3.0° Anti-Squat Suspension Pin Mount One 3...

FEATURES: Aluminum Construction Blue in Color INCLUDES: One 4° F/R Suspension Tie Bar One F/R Suspension Tie Bar REQUIRES: Assembly onto Vehicle

FEATURES: Aluminum Construction Blue in Color INCLUDES: One 5° Rear Suspension Tie Bar One 3° Rear Suspension Tie Bar REQUIRES: Assembly onto Vehicle

FEATURES: Pot Metal Construction Silver in Color INCLUDES: One Slipper Press Plate One Slipper Press Plate Hub REQUIRES: Assembly onto Vehicle

FEATURES: Titanium anodized 6061-T6 Aluminum INCLUDES: A pair of rear axle carriers COMMENTS: This part is an upgrade for the stock carriers

FEATURES: Nylon construction Black in color INCLUDES: One Left Rear Stub Axle Carrier One Right Rear Stub Axle Carrier REQUIRES: Assembly onto Vehicle

FEATURES: Metal and nylon construction Black in color INCLUDES: Two Metal Rear Stub Axles w/Nylon Yokes installed REQUIRES: Assembly onto Vehicle

FEATURES: Steel construction INCLUDES: One Steel Disc Three Friction Pads Two Springs One 4mm Lock Nut One 5mm Lock Nut Instructions REQUIRES: Disassembly of slipper clutch

FEATURES: They concentrate the mass for less overall rotational mass than the the stock Jato driveshafts, which results in quicker acceleration The outside U-joint is lubricated and sealed by a...

FEATURES: Fully assembled and ready to install, left or right application INCLUDES: One Driveshaft Assembly with 3x12.5mm screw pin REQUIRES: Installing between gearbox and stub axle carriers SPECS:...

FEATURES: Direct replacement parts Rubber sealed boots Fully assembled INCLUDES: Two assembled half shafts REQUIRES: Installation on Jato SPECS: Length: 3.19" (81.01mm) Diameter: .454"(11...

FEATURES: Nylon, Rubber and Metal Construction Blue, Black, and Silver in Color INCLUDES: One Fuel Tank Cap Spring One Rubber Tank Gasket One Metal Cap Pin Two Rubber Grommets REQUIRES: Assembly onto...

FEATURES: Direct replacement tank Clear nylon construction with spring loaded lid Pre-installed pressure fittings Tank lid has a pull ring for easier refuelling INCLUDES: One replacement complete...