Traxxas

FEATURES: Durable nylon construction Steel u-joints INCLUDES: Two long external splined half shafts Two long internal splined half shafts Four u-joint connectors REQUIRES: Assembly into a T-Maxx or...

STEEL CONSTANT-VELOCITY CENTER DRIVESHAFTS FOR THE ... E-MAXX #3906 version ONLY!! The E-Maxx 3906 Model version ... will benefit from the added strength and performance from these Traxxas steel...

FEATURES: Black nylon construction INCLUDES: Two heavy-duty short half-shafts (external-splined) Two heavy-duty short half-shafts (internal-splined) Four metal U-joints REQUIRES: Nothing, direct...

This is a pair of optional Center Driveshafts for the older #4909 Traxxas T-Maxx. FEATURES Outside U-joint is lubricated and sealed by...

FEATURES: Clear, nylon construction Black fuel tank cap (spring loaded) INCLUDES: One fuel tank One Pre-installed lid with spring One Pre-installed pressure tap REQUIRES: Assembly on to Traxxas...

FEATURES: One piece, Aluminum Construction Blue Anodized Four lines machined into the plate, as well as 8 holes on the side. INCLUDES: One Center Skid Plate REQUIRES: Traxxas T-Maxx truck SPECS:...

FEATURES: Composite nylon construction, black in color Replaces a worn or damaged bellcrank setINCLUDES: One Left Bellcrank Lower One Left Bellcrank Upper One Right Bellcrank One Draglink One Spring...

FEATURES: Stock aluminum steering bellcranks. Steering link is steel and rods ends are plastic. INCLUDES: Two bellcrank posts One 3x25mm steering link threaded rod with rod ends REQUIRES: Placing...

FEATURES: Replaces stock steering bellcranks. All components are plastic, except for the shoulder screws which are steel. INCLUDES: Two steering bellcranks Four 5x8x2.5mm bellcrank bushings. Two...

FEATURES: Alloy construction Anodized blue in color Attached 90 degree pressure fitting on the side of the pipe Comes in a foam tray covered with a clear plastic box on a hangable header card...

FEATURES: Made of clear silicone material Secures tuned pipe to the header (manifold) INCLUDES: One Coupler SPECS: Outside Diameter: 3/4" (19mm) Inside Diameter: 1/2" (13mm) Length: 1" (25mm)

.

FEATURES: Stainless steel construction. INCLUDES: Four 3x70.5mm pins for the upper front and rear suspension arms. Two 3x63mm pins for the lower front suspension arms. Two 3x57mm pins for lower rear...

FEATURES: Durable steel construction INCLUDES: Eight pins REQUIRES: Assembly onto T/E-Maxx SPECS: Length: 65.3mm (2.57") Diameter: 3.2mm (.13") COMMENTS: These are enough hinge pins for the entire...

FEATURES: Attaches to and protects chassis and supports the rear bulkhead Skidplate is gray in colorINCLUDES: Skidplate and stainless steel plateREQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Replaces damaged rear skidplates. Constructed of black plastic. INCLUDES: One rear skidplate. REQUIRES: Bolting to bottom of chassis using three 3x10mm countersunk machine screws (not...

FEATURES: Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color INCLUDES: Skidplate and stainless steel plate REQUIRES: Installing on chassis with four 3x12mm...

FEATURES: Skidplate is constructed of high impact molded black plastic. Front of skidplate kicks up at about 45 degrees to shield the differential from crash damage or hard landings from jumps...

FEATURES: Black nylon construction INCLUDES: One L&R Front Bumper Mount Set One L&R Rear Bumper Mount Set Eight 3x15mm round head machine screws REQUIRES: Nothing. This is a direct...

FEATURES: Replace stock plastic bumpers with these brushed aluminum versions. Constructed of lightweight 6061 T-6 aluminum. INCLUDES: One two-piece front bumper One two-piece rear bumper REQUIRES:...