Yeah Racing

Description:Upgrade the essentials on your 3Racing Sakura D5 with Yeah Racing's series of parts aimed at reinforcing and introducing more adjustability to your 3Racing Sakura D5. Infinitely...

Description:Add 24 grams to the front side of your Mini-Z Micro Crawler! May not seem much but will give your little crawler a lot more grip to traverse tricky terrain!Feature:For: Kyosho Mini-Z 4x4...

Description:Adjust your suspension setup easily with these damper mounts which features many holes for you to choose from! Add or remove downstop with just one screw!Feature:For: Kyosho Mini-Z 4x4...

Description:Steel upgrade gears to improve the durability of your Axial SCX24! Direct drop in fit replacing the stock parts.Feature:For: Axial SCX24Material: SteelColor: BlackInclude:Worm Gear (1...

Description:Upgrade the housing on your SCX24 to alloy with this upgrade pack, comes with all the mounting hardware required to install! Changing to alloy gives you higher durability when compared to...

Description:Upgrade the housing on your SCX24 to alloy with this upgrade pack, comes with all the mounting hardware required to install! Changing to allloy gives you higher durability when compared...

Description:Spare tire carrier for Axial's SCX24, replaces the backplate found on the Jeep Wrangler body so you don't need to make new holes onto your body. Then you can mount a spare tire you have...

Description:37mm eye to eye length internal spring scale shocks for Axial's SCX24. Comes with all required mounting hardware to install on your micro rig. Please note these shocks do not have seals...

Description:51T and 19T steel gears for Axial's SCX24, upgrade for more durability.Feature:For: Axial SCX24Material: SteelColor: BlackInclude:51T Gear (1 pc)19T Gear (1 pc)

Description:Aluminum rear body mount for Axial's SCX24, providing some extra durability if mounting heavier bodies with lots of accessories on top! Being made from aluminum will also stiffen up the...

Description:Aluminum rear body mount for Axial's SCX24, providing some extra durability if mounting heavier bodies with lots of accessories ontop! Being made from aluminum will also stiffen up the...

Made from soft yet tough fibers, this cleaning brush will allow you to clean out all dust, dirt or other debris from the hardest to get of places on your rc rig! Soft rubber handle allows for...

Description: Setup your 1/28 Racer with ease with this Tool Set! Comes with all the tools you would see used to setup 1/10 Touring Cars, comes with enough tools for you to setup the Droop,...

Include: Yeah Racing Aluminum Ball End Remover (1 pc) Description: A perfect tool for removing stubborn ball ends with minimum efforts as well as wears on the ball ends. With this tool,...

Description:Aluminum steering Rear Hubs for Yokomo's YD2 or YD2S, direct upgrade part for the plastic item.Feature:For: Yokomo YD2 YD2SMaterial: AluminumColor: BlackInclude:Aluminum Rear Hubs (2 pcs)

Description:Super capacitor with specs matched perfectly for high powered brushless systems. This capacitor helps deal with voltage sag during hard acceleration, with very low internal resistance the...

Description:Stylish aluminum transmitter steering wheel with anti-slip sponge for Futaba, KO Propo Sanwa Flysky NB4 transmitters Improved design for better handlingsFeature:For: KO PROPO -...

Description:Stylish aluminum transmitter steering wheel with anti-slip sponge for Futaba, KO Propo Sanwa Flysky NB4 transmitters Improved design for better handlingsFeature:For: KO PROPO -...

Description:Stylish aluminum transmitter steering wheel with anti-slip sponge for Futaba, KO Propo Sanwa Flysky NB4 transmitters Improved design for better handlingsFeature:For: KO PROPO -...

Description:Stylish aluminum transmitter steering wheel with anti-slip sponge for Futaba, KO Propo Sanwa Flysky NB4 transmittersImproved design for better handlingsFeature:For: KO PROPO -...

Description:Silicone Transmitter Wheel Grip for 41-42mm wheels, being stronger than foam means it is less likely to be damaged during transportation. For offroaders or crawlers this wheel will be...

Description:Stainless steel shims measuring an inner diameter of 3mm and a outer diameter of 7mm, comes in thicknesses from 0.1 all the way to 0.3 in 0.05mm increments!Feature:For: RC CarMaterial:...

YA-0583 Sn63 Pb37 Solder Wire 50g 1mm DiameterDescription:Yeah Racing Sn63 / Pb37 solder wires are formulated from a mix of 63% tin and 37% lead. Made from high quality metals, the flux core...

Description:Yeah Racing's well known Tornado 30mm fan updated with a full aluminum booster case, increasing the air flow being directed into the fan! When mounted on a fan mount or esc, the large...

Scale Luggage net to keep all your accessories that you have on your roof rack from falling off. Includes: Rock Crawler Accessory Luggage Net (1 pc)

Description: Aluminum servo mount will be a must have upgrade for all users still using plastic. With strong brushless servos nowadays, plastic might bend and buckle. You can also lift the servo...

Description: Aluminum servo mount will be a must have upgrade for all users still using plastic. With strong brushless servos nowadays, plastic might bend and buckle. You can also lift the servo...

Description: Metal wing mount for your drift bodies! Mounts onto the back side of the trunk to provide you with maximum amount of downforce! Made from steel which provides more rear tire grip...

Include:1/10 RC Rock Crawler Accessories 9 inch Aluminum Ladder (1 pc)Feature:For: CrawlersMaterial: AluminumColor: SilverLength: 155mmIncrease the authenticity of your roof-rack with this Scale...

This is Yeah Racing 4mm Aluminium Wheel Flange Lock Nut 4pcs For RC Car Silver. These high precision and realistic wheel nuts are flanged and knurled for locking security and feature a light-weight...

This is Yeah Racing 4mm Aluminium Wheel Flange Lock Nut 4pcs For RC Car Orange. These high precision and realistic wheel nuts are flanged and knurled for locking security and feature a light-weight...

This is Yeah Racing Aluminum 540 Motor Heat Sink w/ Cooling Fan Blue. This Heat Sink w/ Fan features a durable fan which blows strong winds to help cool off the motor. This Heat Sink with Fan is...

Description: This is Yeah Racing 1/10 RC Rock Crawler Accessories 96cm Long Chain and Hook Set Red. *Photos for reference only. Feature: For: 1/10 RC Material: Steel Color:...

Feature:    For: 1/10 RC    Material: Steel    Color: RedInclude:    Yeah Racing 1/10 RC Rock Crawler Accessory Large Bucket (1 pc)

Description:Graphite upgrade for Tamiya's XV01 shock mounting, upgrade from the kit's nylon fibre for nicer looks and increased strength!Feature:For: Tamiya XV01Material: GraphiteColor:...

Description:Upgrade the Servo Link, Camber link and steering linkages to titanium with this value set! CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and...

Description: Sensor cable for all sensored brushless systems! Keep different lengths to suit different builds. Feature: For: Brushless Sensored Systems Material: Plastic Color:...

Description:Five spoke mini rims which resemble real life racing car rims! Made from hard plastic allowing you to generate the maximum amount of grip from your tires!Feature:For: 1/10 MiniMaterial:...

Description: Yeah Racing's 1.9 Inch Heavy Duty Beadlock Wheel for your scale crawlers! Through the use of CNC machining, the perfect blend of design, material, and weight to bring you the best...

Include:Yeah Racing Spec T Wheels w/ Tires (4 pcs)Note:This wheelset is an assembled wheelset and will require gluing of the tire to the wheelFeature:For: 1/10 OnroadMaterial: Plastic Wheel, Rubber...

Description: This is a Yeah Racing Aluminum Conversion Kit For Tamiya TT02. This kit consists everything you need to upgrade your TT02 and unleash its full potential! Despite the stock Tamiya TT02...

Description: Full metal axle and stainless steel protector set for Traxxas's TRX-4! Upgrade the parts on your rig that come into contact with the trail the most! *Photos for...

Description:Stealthy looking roof rack made from Black Anodized Aluminum and graphite pieces! Mountable LEDS on the front as well.Feature:For: Traxxas TRX-6 Mercedes Benz BodyMaterial:...

Description:A set of three diff protectors for use with Traxxas's TRX-6, bolts on directly without any modifications required! Made from Stainless steel offering the utmost protection!Feature:For:...

Description:Plastic door handles for your Traxxas TRX-4 Body!Feature:For: Traxxas TRX-4Material: PlasticColor: BlackInclude:Door Handles (4 pcs)

Description:Brass link mounts for those who wish to add a small amount of weight to the corresponding end of the rig! Add more structural strength to the rig by replacing the plastic part...

Add weight to your axles to get more from your tires with this set of Brass Portal Covers! Feature: For: Traxxas TRX-4 Material: Brass Color: Brass Include: Brass 118g...

Description: Replace all links on your Traxxas TRX-4 to this set for a titanium look and get the added benefits of lightweight and durability from the titanium material as well! *Photos for...

Description: Alloy diff cover with titanium coating for Traxxas's TRX-4. Perfect match with the alloy axles which are also titanium coated by yeah racing. *Photos for reference only. ...

Description: Protection for your servo where there is still gaps in between your axle and bumper! Fill the gap with this steel fender. *Photos for reference only. Feature: For:...

Description: Protect your Traxxas TRX-4 gearbox with this stainless steel skid plate! Easy to install, only uses one screw and locks into place with the shape of the kit skidplate! *Photos for...

Description: Replacement ball heads for your Traxxas TRX-4 made from brass! Feature: For: Traxxas TRX-4 Material: Brass Color: Gold Include: Brass Ball Heads (4...

Description: Easy to install Window Guards for Traxxas's TRX-4 Body! Using screws and nuts to install adds to the scale realism when installed on your rig! *Photos for reference only. ...

Description: Aluminum Drop Hitch receiver for Traxxas's TRX-4, use this to easily mount a trailer. Features three different offset holes for you to adjust the length which it sticks out the rear of...

Description: Increase the durability of your Traxxas TRX-4 with these aluminum link mount set! The front pan hard bar mount is integrated into one of the mounts and increase stiffness of the front...

Description:Aluminum rear C-Hubs designed specifically for Traxxas's TRX-4, these are for people who do not like Brass offerings and wish to add some more durability over the stock units!Feature:For:...

Description:Aluminum upgrades from Yeah Racing for your Traxxas Tec 2.0! Upgrade from the plastic parts to get more durability whilst out bashing! Direct drop in upgrades for hassle free...

Description:Fine tune how your rig handles by adjusting the shock angle and droop travel with these brass shock mounts. Adding a tiny bit of weight allowing you extract more grip from your...

Description:CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and durability!Feature:For: RC Car LinkagesMaterial: 64 TitaniumColor:...

Description:CNC machined Titanium turnbuckles, made from 64 grade Titanium which ensures great stregnth and durability!Feature:For: RC Car LinkagesMaterial: 64 TitaniumColor:...

Description:Upgrade your TT02 from a backyard basher to a high performance RWD drift car with parts designed with the purpose of throwing massive slides in mind! Parts made from precision CNC...

Include: Yeah Racing Aluminum Front Lower Arm Set For Tamiya TT02B #TATT-001 Yeah Racing Aluminum Rear Lower Arm Set For Tamiya TT02B #TATT-002 Yeah Racing Aluminum Ball Bearing C-Hub Set For...

Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners! More efficient drivetrain by changing to aluminium by...

Description:Aluminum upgrade parts for the essential parts of your Tamiya TT-01! Upgrade parts to aluminum to increase accuracy entering corners and reduce slop with the plastic insert pre-installed...

Description:Aluminum spur gear adaptor plate and spacer set for securely mounting your spur gear on your TT02, this allows for a more flat installation and prevents it from bending under hard...

Description:Yeah Racing's updated damper set for 1/10 RC Drift cars. Simple yet effective solution for dampening your 1/10 drift cars, be they RWD or AWD! Long lower ballcup allows for more droop...

TATT-019BU Aluminum Rear Adjustable Suspension Mount For TT-02 RWD Drift TATT-S03 BlueDescription:Adjustable rear suspension mount for Yeah Racing's TT02 RWD Drift Conversion Kit! Adjustable from 1,...

Description:Adjustable steel universals which allow you to run large trackwidths when using wide drift bodies without the need of keeping different lengths. Made from strong G45 steel to deal with...

Description:Titanium turnbuckles for Tamiya's M08, allowing for lightweight and strength upgrades over the stock parts! Comes with open ended low profile ballends to avoid hitting the wheel and...

Description: Remove the excess play found in the original steering rack and increase smoothness with this bearing supported steering rack! *Photos for reference only. Feature: For:...

TACC-012BU Aluminum Motor Mount Blue for Tamiya CC01Description:Aluminum motor mount for Tamiya's CC01, providing stiffness over stock plastic part and helps dissipate heat.Feature:For: Tamiya...

This is Yeah Racing Mini Tools Set w/ Tools bag For RC CAR, Included 1.5 Hex, 2.0 Hex, 2.5 Hex, 4.0mm Nut Driver, 5.5mm Nut Driver, Phillips Screwdriver and Flat Head Slotted Screwdriver. With this...

Introducing the Yeah Racing Aluminum Conversion Kit For HPI's RS4 Sport 3, this kit consists everything you need to upgrade your RS4 Sport 3 to unleash its full potential as the ultimate racing car...

Description: Make the steering and suspension geometry on your RS4 Sport 3 adjustable by upgrading to this adjustable turnbuckle set! This set comes pre-assembled, so all you have to do is...

Description:Yeah Racing Just Climb variant of the Hackmoto brushed motor! Features a 5 slot armature, which translate to the utmost low end control to navigate tricky terrain or passing through gates...

MRMX-001 Aluminum Steering Knuckle Set For MST RMX2.0 FMX2.0 BlackDescription:Low profile steering knuckle for MST's RMX 2.0 or FMX 2.0. Built in is a removable steering stopper which allows you to...

Description:LED Light kit for Kyosho's Mini-Z MX-01, plugs into the ICS port to get power without having to fiddle with the power ports.Feature:For: Kyosho Mini-Z MX-01,4 Runner Body / Mini-Z Sports2...

High Precision GC301-Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience. The...

Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology...

Description:Spring Steel shafts for Tamiya's DF03, Wild Dagger, Twin Detonator, Double Blaze or Top Force. Increases durability whilst not being overly heavy!Feature:For: Tamiya DF03 Wild Dagger Twin...

Include: Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Note: The pre-installed spring combo is...

Description:Replacement spring set for Yeah Racing's DDL Scale Crawler Shock set! 9 different kinds of springs ranging from the short ones all the way to the long ones!Feature:For: Yeah Racing DDL...

This is a Yeah Racing Aluminum Conversion Kit For Tamiya TT02. This kit consists everything you need to upgrade your TT02 and unleash its full potential! Despite the stock Tamiya TT02 use an...

Description:Yeah Racing's newest high torque water proof servo, with an aluminum front and middle section to help dissipate the heat! Featuring a IP67 waterproof rating, meaning it will be more than...

Description:Aluminum heatsink with a offset center position which allows for more flexibility with wiring and not getting into way other things as well. Feature:For: 540 / 550 MotorsMaterial:...

Description:Aluminum heatsink with a offset center position which allows for more flexibility with wiring and not getting into way other things as well. Feature:For: 540 / 550 MotorsMaterial:...

Description:Rebuild/maintenance parts for the TT02 gear diff from Yeah Racing! Keep spares or rebuild your diff when you want to swap oils or replace parts due to wear!Feature:For: Gear Differential...

Description:Rebuild/maintenance parts for the TT02 gear diff from Yeah Racing! Keep spares or rebuild your diff when you want to swap oils or replace parts due to wear!Feature:For: Gear Differential...

Description:Rebuild/maintenance parts for the TT02 gear diff from Yeah Racing! Keep spares or rebuild your diff when you want to swap oils or replace parts due to wear!Feature:For: Yeah Racing TT02...

Description:Carbon damper stay for Tamiya's TT02 and also Yeah Racing's Upgrade Kit TATT-S04! Strong and lightweight carbon for strengthening and improving your suspension's...

Description:Replacement outdrive for the Yeah Racing Oil Filled Gear Differential Set For Tamiya TT02 TT01 #TATT-020. Note, this will not work with the original Tamiya Diff.Feature:For: Yeah Racing...

Description:Aluminum front body mount for Axial's SCX24, providing some extra durability if mounting heavier bodies with lots of accessories ontop! Being made from aluminum will also stiffen up the...

Description:Aluminum front body mount for Axial's SCX24, providing some extra durability if mounting heavier bodies with lots of accessories ontop! Being made from aluminum will also stiffen up the...

Description:Aluminum non adjustable link set for your 133.7mm Axial SCX24 C10, being non adjustable means your rig won't go out of whack when you hit stuff and when assembling you know it will be...

Description:Alloy front bumper recreating scale looks for your Axial SCX24 micro rig! Installs in place of the original rear bumper and made from alloy gives you protection without adding too much...

Description:RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly...

Description:Titanium and aluminum screw set for Xpress's Execute XQ2S, effectively bringing the weight of your car down to fit the low weight requirements for touring car classes. The red anodized...

Description:Aluminum beadlock rims for Axial's Micro Rig! Beadlock allows you to swap to different tires without having to unglue and reglue again! More weight allows for more grip when crawling...

Description:Replacement turnbuckle set for the Competition Touring Car Upgrade Kit #TATT-S04. Features the camber and steering links, good to have a set in your parts bag for spares!Feature:For:...

Description Upgrade the SCX10 III micro servo insert to 25T aluminum with this upgrade parts bits. For use to upgrade to a 25t servo splined servoFeature:For: SCX10 IIIColor: BlackMaterial:...