Traxxas

This is the Glow Plug Lead Wire for the Revo EZ Starting System. This attaches to the glow plug prong to heat the plug during starting. FEATURES: Blue silicone insulated wire with pre-installed connectors INCLUDES: One glow plug wire lead One Molex pin...

.

FEATURES: Steel construction INCLUDES: Six 3x6mm Roundhead Machine Screws REQUIRES: Phillips screwdriver SPECS: Length: 6mm Diameter: 3mm

FEATURES: Silver metal construction Round head machine screws Phillips drive INCLUDES: Six Screws. SPECS: Length: 8mm Diameter: 2.6mm

FEATURES: Steel construction Round head with phillips drive insert INCLUDES: Six screws SPECS: 3mm thread size 20mm long

FEATURES: Steel construction INCLUDES: Six 3x23mm Roundhead Screws REQUIRES: Phillips screwdriver SPECS: Length: 23mm (0.90") Diameter: 3mm

FEATURES: Steel construction INCLUDES: Six 3x30mm Roundhead Machine Screws REQUIRES: Phillips screwdriver SPECS: Length: 30mm Diameter: 3mm

FEATURES: Steel construction INCLUDES: Six 4x15mm Round Head Screws REQUIRES: Phillips screwdriver SPECS: Length: 15mm (0.59") Width: 4mm (0.16")  

FEATURES: Steel construction. Phillips drive insert. Countersunk head for a smooth flush surface when installed. INCLUDES: (6) Screws SPECS: Diameter: 3mm Length: 20mm

FEATURES: Steel construction Self tapping INCLUDES: Six 2.6 x 10mm Round Head Screws by Traxxas REQUIRES: Phillips head screwdriver SPECS: Length: 10mm Diameter: 2.6mm

FEATURES: Steel construction, silver in color Used on the Traxxas Revo monster truck, can also be used in any application where a 2x6mm roundhead self tapping screw is required INCLUDES: Six 2x6mm Traxxas Countersunk Hex Screws REQUIRES: Small phillips...

FEATURES: Steel construction, silver in color INCLUDES: Six 3x12mm Roundheaded Self Tapping Screws SPECS: Length: 12mm Diameter: 3mm  

FEATURES: Metal construction INCLUDES: (12) Washers SPECS: Size: 3x6mm

.

This is a pair of 5A Fuses for the Traxxas #2974, #2975, #2977 AC Powered Chargers. FEATURES Glass tube type fuses INCLUDES Two 5A Fuses

FEATURES: Metal construction Countersunk (flat head) machine screws Phillips drive insert Replacement parts designed for the Traxxas Nitro Hawk INCLUDES: Six Screws SPECS: Length: 10mm Diameter: 3mm

FEATURES: stainless steel construction phillips drive replacement screws used on the Traxxas LS-II INCLUDES: (6) Screws SPECS: Size: 3x12mm COMMENTS: when screwed-in the head of the screw is usually flush with the surface

FEATURES: Steel construction Phillips drive Flanged pan head INCLUDES: (6) Screws SPECS: Diameter: 3mm Length: 8mm  

.

FEATURES: Steel construction INCLUDES: Six 3x8mm Washer Head Self Tapping Screws REQUIRES: Phillips screwdriver SPECS: Length: 8mm Diameter: 3mm

FEATURES: Black Plastic Construction INCLUDES: Two Wedges REQUIRES: Traxxas 4-TEC SPECS: Length: 20mm (.787") Width: 7mm (.275") COMMENTS: None

FEATURES: Steel construction Phillips drive insert Lower shock attachment screws INCLUDES: Six Ball Screws for the Traxxas 4-Tec Electric Powered 4 Wheel Drive Sedan.

FEATURES: Plastic washers INCLUDES: Ten Washers SPECS: 6x8x.5  

FEATURES: Red silicone construction. INCLUDES: One 12.2x1mm o-ring. REQUIRES: Nothing. This is a direct replacement part.

FEATURES: Cushioned double sided tape Anti-stick backing on each side kept until tape is applied INCLUDES: Two 25x25mm squares REQUIRES: Application SPECS: Length: 25mm Width: 25mm Thickness: 1mm COMMENTS: Tape is often used to secure a RX or ESC on a...

Fits Continued: 1/10 Nitro 4-Tec / Nitro Slash / Nitro Sport / Nitro Stampede / Nitro Rustler INCLUDES: 4- stub axle pins

These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins Axle pins are steel INCLUDES: Four 2.5x12mm axle pins REQUIRES: Inserting pins through stub axles (4953) and...

.