E-flite EFLM1500 Park 480 Brushless Outrunner Motor 910Kv 3.5mm Bullet

Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
Ideal for scale park flyers 25–35 oz (710–990 g)
Ideal for models requiring up to 250 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design, 4mm shaft can easily be reversed for alternative motor installations
Slotted 12-pole outrunner design
Quiet, lightweight operation
High-quality construction with ball bearings and hardened steel shaft

Needed To Complete
20A–35A brushless ESC

2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD

10x7–12x6 propeller

Overview
The Park 480 Brushless Outrunner motor is designed to deliver clean and quiet power for 3D park flyers weighing 20 to 30 ounces (565 to 850 grams), scale park flyers weighing 25 to 35 ounces (710 to 990 grams), or models requiring up to 250 watts of power.  It’s an especially good match for E-flite's Mini Edge 3D ARF (EFL2225) and Mini Funtana 3D ARF (EFL2075), and would provide extreme power for sport park flyers such as the Mini Ultra Stick ARF (EFL2250).  

Product Specifications
Bushing Or Bearing Bearing
Connector Type 3.5mm Bullet
Idle Current (Io) .85A @8V
Motor Design Outrunner
Motor Type Brushless
Outer Diameter 1.4 in (35mm)
Recommended Prop Range 10x7 to 12x6
Resistance .08 ohms
RPM/Volt (Kv) 910
Shaft Diameter 4mm (.16 in)
Voltage 7.2 to 12
Wire Gauge 16 AWG