E-flite EFLM4032A Power 32 Brushless Outrunner Motor 770Kv 3.5mm Bullet

Equivalent to a 30- to 36-size glow engine for sport and scale airplanes weighing 3.5–6 lb (1.6–2.7 kg)
Ideal for 25- to 36-size 3D airplanes up to 4.5 lb (2 kg)
Ideal for models requiring up to 800 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapter and mounting hardware
Quite, lightweight operation
External radial rotor design—5mm shaft can easily be reversed for alternative motor installations
High-quality construction with ball bearings and hardened steel shaft
Slotted 14-pole outrunner design

Needed To Complete
- 60A brushless ESC
- 3–5S Li-Po or 10- to 16-cell Ni-MH/Ni-Cd 
- 11x7 to 14x10 prop; 10x10E tested on 5S in Sundowner 36

Overview
The Power 32 is designed to deliver clean and quiet power for 30- to 36-size sport and scale airplanes weighing 3.5 to 6 pounds (1.6 to 2.7 kilograms), 25- to 36-size 3D airplanes up to 4.5 pounds (2 kilograms), or models requiring up to 800 watts of power. It's an especially good match for the Gee Bee Tiger Moth, TopFlite DC-3, Phoenix Sonic 25 and 3D airplanes such as the E3D.

Hardware is included with the purchase of this motor.

Specifications:

Bushing Or Bearing Bearing
Connector Type 3.5mm Bullet
Idle Current (Io) 2.40A @ 10V
Motor Design Outrunner
Motor Type Brushless
Outer Diameter 1.7 in (42mm)
Recommended Prop Range 11x7 to 14x10
RPM/Volt (Kv) 770
Shaft Diameter 5mm (.20 in)
Voltage 12–16.8
Wire Gauge 14 AWG