Hot Racing
Hot Racing ERVT505F06 50mm Monster Blower Motor Cooling Fan Kit : Traxxas E-Revo 2
- SKU:
- ERVT505F06
- UPC:
- 083745292633
- Condition:
- New
Description
This is the Hot Racing Monster Blower clip-on universal heat sink and fan for the Traxxas E-Maxx, E-Revo 2.0, or any other custom project
- Large 50x50x10.3mm 7-blade fan
- Clip-on design for simple installation
- Black and Blue anodized aluminum heat sink provides efficient heat transfer
- Adapter with Traxxas-style connectors
- 24AWG silicone wire
- One (1) Traxxas-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (e. g. blue Loctite) on fan mount screws
- Ensure fan blades are protected
- This system uses a Traxxas-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing MH505F02 for equivalent system with a Deans-style connector
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
View AllClose
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance- Large 50x50x10.3mm 7-blade fan
- Clip-on design for simple installation
- Black and Blue anodized aluminum heat sink provides efficient heat transfer
- Adapter with Traxxas-style connectors
- 24AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan- One (1) Traxxas-style adapter connector
REQUIREMENTS:
- Installation- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (e. g. blue Loctite) on fan mount screws
- Ensure fan blades are protected
- This system uses a Traxxas-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing MH505F02 for equivalent system with a Deans-style connector
SPECIFICATIONS:
- Fan Size: 50x50x10.3mm- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- Replacement Hot Racing 50x50x10.3mm fan is MH505F