Hot Racing

Hot Racing Brass tight tolerance steering Fix links for the Axial SCX30FEATURES: - The linkage set are much tighter than the stock steering linkage.- CNC Brass Bar stock- stainless Steel pivot...

Hot Racing aluminum tight tolerance steering links for the Axial SCX30FEATURES: - The linkage set are much tighter than the stock steering linkage.- 6061 aluminum links, Silver anodized- Steel pivot...

FEATURES: - CNC 6061-T6 Aluminum servo saver set,- silicone servo saver o-ring- Anodized silverYOU WILL RECEIVE: - One (1) CNC 6061-T6 Aluminum servo saver setREQUIREMENTS: - installation (do not...

Hot Racing brass SCX30 Axles Rear Hub for the Axial SCX30 axles. Add extra weight to your crawler where it needs it down low. Adds about 4.1g (0.144 oz) to each Side.FEATURES: - CNC machined solid...

Hot Racing brass Worm gear Axles steering blocks (steering knuckles) for the Axial SCX30 axles. Add extra weight to your crawler where it needs it down low. Adds about 7.6g (0.27oz) to each steering...

Hot Racing wheel weights for the stock 0.7 in wheels AXI3313 on the Axial SCX30FEATURES: - CNC machined solid brass billet- 3.6g each fitted to the wheels to lower the vehicles center of gravity,...

This is a Hot Racing No Flex optional upgrade Brass 4-link set for Axial SCX30 vehicles.Add increase durability to your SCX30 with LWB by upgrading your stock plastic links with the Hot Racing brass...

This is a Blue Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES: Blue Anodized Aluminum constructionYOU WILL RECEIVE: One heat sink for 030 motorREQUIREMENTS: for better heat...

Hot Racing optional upgrade heavy duty Steel Rear CVD Universal Axles Drive Shafts for Arrma Grom vehicles.FEATURES: - Heavy duty CNC machined steel wheel stub shafts- Replaces factory CVD Dog bone...

Hot Racing optional upgrade heavy duty Steel Front CVD Universal Axles Drive Shafts for Arrma Grom vehicles.FEATURES: - Heavy duty CNC machined steel wheel stub shafts- Replaces factory CVD Dog bone...

11T Mod-1 Pinion Gear for use on 1/8 and 1/10 Scale Cars use Mod 1 Spur Gear.FEATURES:Hardened Steel ConstructionBlack in colorYOU WILL RECEIVE:One 11T Mod-1 Pinion GearOne 4x4mm Set...

Hot Racing optional hop-up rear suspension lower links (ladder bar) for the Losi Baja Rey, Hammer Rey Rock Rey and Baja Rey 2.FEATURES:- CNC machined 3mm thick carbon fiber- CNC machined 6061...

Hot Racing 1.9 6-lug steel wagon wheels in black with 12mm hex hubsFEATURES:- Stamped steel wheel design smoothed out with nickel plating and then finished with durable powder coating- Three-piece...

This is the optional Hot Racing Aluminum Rear Upper Suspension Arm foruse with the ARA 1/18 GromFEATURES: - CNC Aluminum Construction- Anodized Black in Color- Steel pivot ballsYOU WILL...

These Steel Diff Outdrives are the perfect replacement part for your ARRMA ARA311177 On the GROMFEATURES: Manufactured from tough #45 steel for long lasting durability - Precision machined for...

Hot Racing 21T Savox (SH-0265MG) aluminum Steering horn (arm) for the Losi Mini LMTFEATURES: - CNC Aluminum 21T servo saver set- Steel servo saver spring- Anodized blackYOU WILL RECEIVE: - One (1)...

Hot Racing 20T aluminum Steering horn (arm) for the Losi Mini LMTFEATURES: - CNC Aluminum 20T servo saver set,- Steel servo saver spring- Anodized blackYOU WILL RECEIVE: - One (1) CNC Aluminum servo...

Hot Racing replacement Sway Bars SRoll bar pivot Mount for the Losi mini LMT sway bar kit (Los214042) made for the Losi mini LMTFEATURES: - CNC 6061 aluminum Aluminum Roll bar pivot MountYOU WILL...

This is the optional Hot Racing Aluminum Rear Suspension Arm foruse with the Arrma 1/18 GromFEATURES: CNC Aluminum Construction Anodized Black in Color CNC Machined Rear Lower Suspension Arm...

This is the optional Hot Racing Aluminum Front Upper Suspension Arm for use with the Arrma 1/18 GROMFEATURES: - CNC Aluminum Construction- Anodized Black in Color- Steel pivot ballsYOU WILL RECEIVE:...

Optional Aluminum Servo Mounts for the Grom series.FEATURES: Two position mount for stock servo and Savox Servo (SH-0265MG)CNC Aluminum construction, black in colorDirect fit hop-up requires no...

Hot Racing super duty steel 0.5 Mod 55T spur gear for 1/18th th scale Losi 2WD Mini Drag Mini-T2 Mini B2 vehicles,-Steel construction for total reliability when using high power brushless systems-CNC...

Hot Racing CNC aluminum tight tolerance steering links for the Losi Mini LMTFEATURES:- The linkage set are much tighter than the stock steering linkage.- 6061 aluminum links, Black anodized- Steel...

Sway Bar Spring Rod Set for the Losi LMTFEATURES:Spring Steel constructionSway Bars are color coded by sway bar diameterYOU WILL RECEIVE:(6) Pair of Sway Bars Spring Rod(4) Gold 1.5mm (Hard)(4)...

Hot Racing Multi aluminum Upper shock moun for the 1/18th scale Losi Mini LMT vehiclesFEATURES:- Black anodized CNC machined aluminum construction- Four Upper shock mount options- Direct bolt-on...

Hot Racing Multi aluminum Lower shock moun for the 1/18th scale Losi Mini LMT vehiclesFEATURES:- Black anodized CNC machined aluminum construction- Two Lower shock mount options- Direct bolt-on...

Optional Aluminum Servo Mounts for the Mini LMT series.FEATURES:Two position mount for stock servo SPMSSX108 and Savox Servo (SH-0265MG)CNC Aluminum construction, black in colorDirect fit hop-up...

CNC aluminum Heavy Duty Bearing rear axle Mount lockout for the Losi Mini LMTFEATURES:CNC Aluminum lockouts are made of strong light weight 6061Heavy Duty BearingAnodized black with a laser etched...

Hot Racing heavy duty aluminum steering blocks, (Spindle, axle carriers, knuckle) with oversize bearing for the 1/8 Losi LMT.FEATURES:- CNC machined aluminum, anodized black- Heavy duty rubber sealed...

DESCRIPTION:This is the optional Hot Racing Aluminum Mid Chassis Brace for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Mid Cross...

DESCRIPTION:This is the optional Hot Racing Aluminum Chassis Brace Body Lock Plate for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Cross Brace...

DESCRIPTION:This is the optional Hot Racing Aluminum Chassis Brace Lower for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Cross Brace...

DESCRIPTION:This is the optional Hot Racing Aluminum Chassis Brace Upper for Losi Mini LMTFEATURES:Aluminum CNC construction, Black in colorYOU WILL RECEIVE:One Aluminum Chassis Cross Brace...

Hot Racing Aluminum Lower Link Mount with Roller bearing 1/18th scale Losi Mini LMT vehiclesFEATURES:- Black anodized CNC machined aluminum construction- Two Aluminum Lower Link Mount- Direct bolt-on...

Hot Racing optional upgrade axle Main body, CNC milled aluminum housing, axle truss for Losi Mini LMTFEATURES:- CNC machined billet aluminum Main axle housing and Tube- Integrated CNC machined link...

Hot Racing optional aluminum Front axle upper link mount for the Losi mini LMTFEATURES:- CNC machined 6061-T6 aluminum, anodized black- Stronger and more rigid than stock plastic component- Retains...

Hot Racing 12mm aluminum clamping wheel hexes for the front and rear of the 1/18 Mini LMT vehicles.FEATURES:- CNC 6061 aluminum construction- Anodized black in color- Clamps onto axles so drive pin...

Hot Racing 6x18mm aluminum standoff posts with M3 threads for miscellaneous applications such as suspension links, tie rods, or chassis cross membersFEATURES:- CNC machined 6061-T6 aluminum- Anodized...

Hot Racing Conversion aluminum Tele Damper kit for SXTF326R01 or SXTF326RX04. These Conversion shocks are friction damped, requiring only a coating of tacky grease .FEATURES:- Machined aluminum and...

Hot Racing optional upgrade aluminum High Clearance Links 4 link set for 5.26" (133.7mm) wheelbase Axial SCX24 vehicles.Add increase articulation durability to your SCX24 with LWB by upgrading your...

Hot Racing steel super duty Steel Spur Gear 55T 0.8Mod (32P) spur gear for 1/10 off road and 1/8 all road Arrma 4X4 vehicles. See comments below for specific vehicle fit information.FEATURES:- Rugged...

Hot Racing aluminum fixed steering link and locked servo arm for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, Typhon BLX and 1/7 LimitLess InFraction Mojave, Felony...

Hot Racing Aluminum Front Steering Blocks Arrma 1/10 4S BLX 4X4 vehicles.See comments below for specific vehicle fit information.FEATURES:- Stronger and stiffer than stock plastic steering blocks-...

Hot Racing aluminum front c-hubs (caster blocks) for 1/10 4S BLX Arrma 4X4 vehicles.See comments below for specific vehicle fit information.FEATURES:- Stronger and stiffer than stock plastic caster...

Hot Racing aluminum threaded front shock bodies 1/10 Arrma 4X4 4S BLX vehicles. See vehicle compatibility in comments below.FEATURES:- Threaded shock bodies for easy, precise, and consistent...

Hot Racing Aluminum Roof Rack with Light Bar with LEDs Light BarFEATURES:- 4 LEDs Light bar- Rugged CNC aluminum housing for durability and to dissipate heat- Realistic detailYOU WILL RECEIVE:- One...

Hot Racing 40 tooth, 1.0 Mod spur gear for the Traxxas Revo 3.3 and Slayer Pro 4X4FEATURES:- CNC machined and hardened steel construction- Upgrades factory plastic gear- Super heavy duty 1.0 Mod...

Optional Aluminum Rear Shock Towerfor the Traxxas 4x4 Slash, StampedeFEATURES:6061-T6 Aluminum construction, Black in colorReplaces worn or damaged Front shock towerYOU WILL RECEIVE:One Black Rear...

Hot Racing clamping servo horn (servo arm) for 24 spline HItec servoFEATURES:- Lock clamp gives precise and secure fit- CNC machined 6061 aluminum, anodized black- Two M3 holesYOU WILL RECEIVE:- One...

Hot Racing clamping servo horn (servo arm) for 23 spline (JR/Airtronics/KO/) servosFEATURES:- 23T-JR/Airtronics/KO/- 6061 Aluminum Material anodized black- Strong/Thick- Increased arm offset for...

Hot Racing aluminum differential gear and cover for the Team Associated DR10, Pro SC10 and Trophy RatFEATURES:- Billet CNC machined aluminum, hard anodized- Direct fit hop-upYOU WILL RECEIVE:- One...

Aluminum Speed Run Wheelie Bar For Associated DR10FEATURES:- CNC Machined aluminum construction- mm in length with an 0 to 10 deg adjustable angle,- Side or center wheel setup options, and a solid...

Hot Racing Aluminum Vertical Shock Mounts Team Associated DR10This rear shock mount alters the shock geometry, placing the shocks in a more vertical position to improve rear weight transfer at launch...

Hot Racing light weight aluminum differential locker (spool) for the gear differential in the Team Associated DR10, Pro SC10 and Trophy RatFEATURES:- CNC machined aluminum construction- Anodized blue...

Hot Racing stainless Steel motor mount plate for stock motor or 050 motor SCX 24This motor plate is a direct replacement for the factory motor plate.FEATURES:- CNC machined stainless steel- Motor...

Hot Racing optional upgrade aluminum High Clearance Links link set for 5.26" (133.7mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 with LWB by upgrading your stock plastic links with...

Hot Racing optional upgrade heavy duty front splined star drive CVD axle kit for the Losi Rock ReyFEATURES:- CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and stub axle-...

Hot Racing aluminum 29mm differential carrier (case) for the 1/8, 1/7 Arrma Fits the front, center, or rear differential. See vehicle model compatibility in comments below.FEATURES:- CNC machined...

This is the Hot Racing Twin Twister Blower desigen to fit on Arrma heat sink ARA390296 wich comes with 1/5 ArrmaFEATURES:- Forced airflow over motor heat sink to increase cooling for improved...

Hot Racing aluminum triple bearing support rear hubs with carbon fiber link tabs for the 1/5 ArrmaFEATURES:- CNC machined aluminum construction, anodized black- Double shear 5mm carbon fiber link...

Hot Racing optional 03M steel transmission gear set for Two-gear transmissions found in the Axial SCX24FEATURES:- Precision CNC machined #45 steel- Hardened gears for increased wear resistance and...

This is a Gold Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES:Gold Anodized Aluminum constructionYOU WILL RECEIVE:One heat sinkREQUIREMENTS:Take off all motor stickerSlide...

Hot Racing dirt guard chassis cover for the 1/10 scale Traxxas Rustler. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a...

Hot Racing 34T Mod-1 Pinion Gear for use on 1/8 Scale Cars.FEATURES:Hardened steel constructionBlack in colorYOU WILL RECEIVE:One 34T Mod-1 Pinion GearOne 5x5mm Set ScrewREQUIREMENTS:Installation on...

Hot Racing optional upgrade heavy duty Long splined star drive axle kit for 1/10 Arrma 4X4 vehicles 4S. See comments below for specific vehicle fit information.FEATURES:- Replaces stock diff...

Hot Racing aluminum threaded rear shock bodies 1/10 Arrma 4X4 4S BLX vehicles. See vehicle compatibility in comments below.FEATURES:- Threaded shock bodies for easy, precise, and consistent...

This Is A Full M1.4 Screw Kit set for Stock Axial 24 from Hot RacingFEATURES:stainless SteelYOU WILL RECEIVE:Screw Set total 81 pieces of screwsRH M1.4 X5 mm Round Head Screw (48 pieces)RH M1.4 X8 mm...

Hot Racing chassis frame conversion for the Axial SCX24 vehiclesFEATURES:- CNC machined aluminum construction- Anodized black with secondary-processed machined beveled edges for outstanding looks-...

These are Brass Hex Wheel Hubs for the SCX24FEATURES:CNC Machined Solid Brass construction.YOU WILL RECEIVE:Four Hex Wheel HubsFour 2 x 6mm Axle PinsREQUIREMENTS:Assembly onto SCX24...

Hot Racing 54-tooth 0.8 metric pitch (compatible with 32-pitch) aluminum spur gear for the Traxxas Jato 3.3, Rally VXL, Slash 4X4, Stampede 4X4, and T-Maxx 3.3 with slipper clutch...

Hot Racing Aluminum Direct drive Servo Saver with heavy tension spring.FEATURES:- CNC 6061-T6 aluminum construction- Black anodized- Multiple inserts to accommodate many different servo splinesYOU...

Hot Racing Aluminum Direct drive Servo Saver with heavy tension spring.FEATURES:- CNC 6061-T6 aluminum construction- Black anodizedYOU WILL RECEIVE:- One (1) 23 tooth spline (- KO, Sanwa, JR,...

this is an aluminum double clamp locking servo armFEATURES:double lock clamp to give precise fit to lock on to the servo spline.CNC 6061 aluminum construction,anodized black in colorcompatible with...

Hot Racing aluminum lower arm set for the Traxxas Rustler 4X4FEATURES:- CNC machined 6061-T6 aluminum, anodized blackYOU WILL RECEIVE:- Two (2) lower for front or rear arms- Hinge pin set...

Hot Racing dirt guard chassis cover for the 1/10 scale Traxxas Rosler 4X4 . The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper chassis access; and uses a...

Hot Racing #45 Steel 28T Mod1 Light weight Spool Gear allows you to fine tune the gearing of your Limitless vehicleFEATURES:- light weight designs reduce rotational mass at the axle, optimizing...

Hot Racing red High Speed Super Lube is a light lubricant ideal to increase efficiency and longevity of gears, axles, and jointsFEATURES:- High-performance grease which can reduce friction loss by up...

Hot Racing 050 High Torque motor with 11T brass gear for Axial SCX24.SPECIFICATIONS:High Torque Magnet and RotorTuned for Rock ClimbingBrass Pinion Gear: 64P 11TRated Voltage: 7.4 VTotal length: 1...

Hot Racing 32mm internal spring damper shock set for Axial SCX24 and other custom Rock Crawler projectsFEATURES:- CNC machined aluminum shock bodies, black anodized- Precision machined mm stainless...

Hot Racing optional upgrade aluminum High Clearance Links set for 5.25" (133.5mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 by upgrading your stock plastic links with the Hot Racing...

This is a red Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES:Red Anodized Aluminum constructionYOU WILL RECEIVE:One heat sinkREQUIREMENTS:Take off all motor stickerSlide...

This is a Black Slide-On heat sink.This Slide on with a tight fit onto the motor.FEATURES:Black Anodized Aluminum constructionYOU WILL RECEIVE:One heat sinkREQUIREMENTS:Take off all motor...

Hot Racing super duty steel 0.5 Mod 60T spur gear for 1/18th th scale Losi 2WD Mini-T2 vehicles,-Steel construction for total reliability when using high power brushless systems-CNC machined and...

This is a set of optional Hot Racing threaded aluminum shocks for the Losi Mini-T 2 from LosiFEATURES:- CNC machined 6061-T6 shock bodies, caps, spring adjusters (collars), and spring retainers-...

This is a set of optional Hot Racing threaded aluminum shocks for the Losi Mini-T 2 from LosiFEATURES:- CNC machined 6061-T6 shock bodies, caps, spring adjusters (collars), and spring retainers-...

Hot Racing Aluminum flush fit skid plate mount AONFEATURES:- CNC 6061-T6 Aluminum construction- Anodized Red- For a flush fit when useing AR320432 with AON331M08YOU WILL RECEIVE:- One Skid plate...

Hot Racing wheelie bar for the 1/8th Arrma BLXFEATURES:- Wheelie bar is 2mm stainless steel construction- Two length and 3 setting.- Ball bearing polyurethane wheelYOU WILL RECEIVE:- One (1) wheelie...

.

Hot Racing adjustable aluminum steering bellcrank and servo saver for the Traxxas X-Maxx 6S and 8SFEATURES:- Super-tough, fully adjustable servo saver bell crank- Replaces factory plastic for a...

Includes: - Left and right aluminum steering knuckles - Two Bearing collars - Two 23 x 17 x 4mm Bearings  FEATURES: - CNC machined 6061-T6 aluminum construction - Triple bearing support...

This is the Hot Racing Upper Rear Differential Cover for the Traxxas X-Maxx. FEATURES Constructed of CNC machined 6061...

Includes: - One (1) differential housing cover (Replaces factory plastic 7780 differential cover) FEATURES: CNC machined aluminum construction for a stronger and more rigid assembly than the...

Black aluminum Rear Shock Mount for the 1/16 Traxxas Revo.  FEATURES: CNC Constructed of 6061-T6 aluminum, black anodized. YOU WILL RECEIVE: One Rear Shock Mount for the 1/16...

Hot Racing steel helical spiral Underdrive 35T/10T gear set for 1/10 Traxxas TRX-4FEATURES:- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than...

Hot Racing steel helical spiral overdrive 33T/12T gear set for 1/10 Traxxas TRX-4FEATURES:- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the...

Replace the stock plastic rear body posts on your Traxxas TRX4 with these aluminum rear body posts with graphite brace from Hot Racing. FEATURES: CNC Aluminum Graphite Construction, Black...

Replace the stock plastic Front body posts on your Traxxas TRX4 with these aluminum Front body posts from Hot Racing. FEATURES: CNC Aluminum Graphite Construction, Black in color YOU WILL...

Hot Racing aluminum outer portal drive housings for the Traxxas TRX-4 front or rear axles FEATURES: - CNC machined 6061-T6 aluminum - Anodized black with laser engraved lettering YOU WILL...

Hot Racing Aluminum Diamond plate Rear bumper with LED light buckets and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper, anodized...

Hot Racing aluminum front custom grille for the Traxxas TRX4 Land Rover Defender FEATURES: - CNC machined billet aluminum bumper, anodized semi-flat black - all machined LED mounts fit Traxxas...