HoBao 1/10 HYPER SC 2.0 Brushless Short Course Truck RTR Metallic Gray Body

[ELECTRIC]
Radio: 3-channel 2.4GHz FHSS with dual rate steering and throttle, charge jack on transmitter for optional NiCd batteries
Servo: High output ball bearing, metal gear, digital, 18kg-cm torque
Motor: 3900Kv brushless, 4 pole, Outer Diameter Ø36mm, Shaft Ø3mm
ESC: HobbyWing 60A waterproof ESC with single Deans plug battery connectors, cooling fan, program card

[FEATURES]

All Metal Parts CNC Machined.

Chassis: Lightweight, Hard anodized CNC aluminum, 3mm thick.


Center Top Brace

Wire pass through.
Quick Release 

Drive:

Central: Single Ø4mm Hardened steel center driveshaft.
-. Optional  Aluminum center driveshaft #OP1-0083 
Front wheel: CVA axles, Ø3.2mm Hardened steel.
Rear wheel: Dogbone axles, Ø3.4mm Hardened steel.
-. Optional rear wheel CVA axles #OP1-0082

Differentials:

Center differential is directly connected to rear differential.
Front, Rear and Center Differential, Metal Bevel gear, Anti-leakage Differential housing.
Pinion Gear: 10T (MOD 1)/ Ring Gear: 39T (MOD 1)
Center Spur Gear: 40T (MOD 1)
Motor Gear: 13T (MOD 1)
Front differential filled with #20K silicone oil.
Center differential filled with #9K silicone oil.
Rear differential filled with #5K silicone oil.

Shocks:

Filled with front #700 silicone oil and rear #600 silicone oil.
Alum 12mm Big Body, 3.5mm Shaft, Alum Adjustable Ring, Shock Cap Protector.
Spring:
-. Front: 0.86kg/cm, L=50mm, Blue
-. Rear: 064kg/cm, L=65mm, Blue
-. Optional Front Spring#OP1-0073: 1kg/cm, L=50mm, Grey
-. Optional Rear Spring #OP1-0074: 0.73kg/cm, L=65mm, Grey
-. Shock Tower: 3mm CNC alum
-. Optional carbon fiber shock tower, Front tower #OP1-0070 & Rear tower #OP1-0071

Suspension:

Front PBS
New design steering block with enlarged pivot ball and alum steering arms.
Optional alum steering block set #OP1-0077; Alum rear hub #OP1-0079.
New strengthened composite upper arms and lower arms.( Also Fitting for older versions of the Hyper 10SC)
Optional carbon fiber arm insert#OP1-0068 and #OP1-0069
Front & rear anti-roll bars.
New Alum front and rear arm holder.
Front and rear CNC alum arm holder with pill inserts#11367, adjustable toe angles and anti-squat angles.

Steering:

New Steering Crank set with Strengthen CNC Alum steering rack and hard spring.
Ball bearing equipped with servo saver

Motor Mount:

CNC alum laydown motor mount
Fitting for motors with size below 38mm
Spur gear cover

Tires: 2.2″/3.0″ Short Course Tires.

Wheel Hex Hub:

Front 12mm wheel hex hubs , Plastic
Rear 12mm wheel hex hubs, +1mm , Plastic
Optional Front wheel hex hubs#OP1-0075; Rear wheel hex hubs #OP1-0076
Wheels:

2.2″/3.0″, 12mm #40127
Optional 5-Spoke Wheels. #11034
Ball Bearings: Full set included
Caster: Adjustable.
Camber: Adjustable.

[REQUIREMENTS]

2S LiPo batteries with single Deans Connector.
Battery Charger
AA Batteries for Transmitter (4)