Hot Racing
Hot Racing MH404F02 Red Monster Blower Heat Sink Fan w/ Deans Conn : 1/8 Motors
- SKU:
- MH404F02
- UPC:
- 083745995800
- Condition:
- New
Description
This is the Hot Racing Monster Blower clip-on universal heat sink anf fan for the Arrma 1/8 Kraton, Talion, Typhon, and Senton. or the Axial 1/8 Yeti XL; Traxxas E-Maxx and E-Revo; or any custom projects
- Large 40x40x10.3mm 7-blade fan
- Clip-on design for simple installation
- Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with Deans-style connectors
- 24AWG silicone wire
- One (1) Deans-style adapter connector
- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (e. g. blue Loctite) on fan mount screws
- Ensure fan blades are protected
- This system uses a Deans-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing ERV404F06 for equivalent system with a Traxxas-style connector
- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
- Replacement Hot Racing 40x40x10.3mm fan is MH404F
View AllClose
FEATURES:
- Forced airflow over motor heat sink to increase cooling for improved efficiency and performance- Large 40x40x10.3mm 7-blade fan
- Clip-on design for simple installation
- Red anodized aluminum heat sink provides efficient heat transfer
- Adapter with Deans-style connectors
- 24AWG silicone wire
YOU WILL RECEIVE:
- One (1) clip-on heat sink with fan- One (1) Deans-style adapter connector
REQUIREMENTS:
- Installation- Recommended to loosen fan screws during installation, then tighten again after installation. This will help minimize tweaking and binding the fan.
- Medium strength thread lock (e. g. blue Loctite) on fan mount screws
- Ensure fan blades are protected
- This system uses a Deans-style connector. If your system uses another type of connector you'll have to switch connectors or use an adapter. See Hot Racing ERV404F06 for equivalent system with a Traxxas-style connector
SPECIFICATIONS:
- Fan Size: 40x40x10.3mm- Input Voltage: 11.1V (12V max)
- Fits motors with a can diameter of 1.6 inches (40mm)
COMMENTS:
- For equivalent heat sink and fan, anodized blue and with a Traxxas-style connector, see Hot Racing ERV404F06- Replacement Hot Racing 40x40x10.3mm fan is MH404F