NHX

Features:AluminumBlue AnodizedSpecs: 87x59mmFits: Slash 4x4 RearIncludes: 1x Rear Shock Tower

Features:  Made of Aluminum, Anodized in SilverSpecs : 70.5x50.5mmFits : Slash 4x4 FrontIncludes : 1x Front Shock Tower with Hardware

Features:  Made of Aluminum, Anodized in OrangeSpecs : 70.5x50.5mmFits : Slash 4x4 FrontIncludes : 1x Front Shock Tower with Hardware

Features:  Made of Aluminum, Anodized in RedSpecs : 70.5x50.5mmFits : Slash 4x4 Includes : 1x Front Shock Tower with Hardware

.

This is the all-new NHX MAX6 Direct –Power, Monster Torque, High Speed, Ultra-Efficient Brushless, Steel gear, IP68 Waterproof servo. This servo has tremendous power, ready to take on any RC vehicle...

A must have POWER SWITCH from NHX, a tiny MCU controlled on/off switch for your radio controlled model. A simple push button operates the switch meaning to eliminate the problems associated with...

NHX 1/5 Twin Cooling Fan with Housing.Features:Twin 40X40X10mm cooling Fans with  high airflowFan housing made of heat-resisting materialPlugs directly into your receiver Super easy to...

.

Features:Extremely durable Armor Front Bumper for TRX-4 / TRX-6

.

Features:Material: Aluminum Splined Drive ShaftColor : RedFits: Traxxas Slash 4x4 Front  Specs:Length 115mm Includes:Aluminum Front Splined Drive Shaft (2) 14mm Hubs (2)Flange nut (2)

Features:High quality brass materialIncrease the weight and effectively reduces center of gravitySuitable for Redcat GEN8 RC crawlersSpecification:Material: BrassWeight: About 28gPackage:2pcs/set...

Features:High quality brass materialIncrease the weight and effectively reduces center of gravitySuitable for Redcat GEN8 RC crawlersSpecification:Material: BrassWeight: About 60gPackage:2pcs/set x...

Specification:Length: 168mm / 6.61inchPackage Includes:2 Pieces RC Car Metal Foot Pedal Plate

Features:Aluminum Right & Left Foot Board for Axial SCX10 IISpecs: 147x24mmColor Titanium 

Features: Heavy Duty Metal Includes: Front & Rear Center Drive ShaftSpecs: 107mm / 90mmFits: Axial SCX10 III 

Replace your stock molded plastic bumper mounts on your Axial 1/10 SCX10 III with our new Brass Alloy Bumper Mounts. Brass construction adds weight for added traction and gives your rig a different...

.

.

.

.

Features:Material: Metal Splined Drive ShaftColor: BlackFits: SCX10 II / TRX-4Specs:Length 112mm Length 86mmIncludes:Front & Rear Metal Center Driveshaft CVD 

.

Features:Fits Axial SCX 24 stock tires onlyCNC machined billet Solid BrassNo Hex Drive design to maximize wheel weight.Includes:4x Brass wheel with pins for SCX24Specs:Wheel diameter: 26.5mmWeight:...

.

.

.

.

Scale LiPo Battery Voltage Checker is a multi-purpose scale accessory. This voltage checker replicates the look of a 12V battery, but features a display on the side that lets you keep an eye on your...

Scale LiPo Battery Voltage Checker is a multi-purpose scale accessory. This voltage checker replicates the look of a 12V battery, but features a display on the side that lets you keep an eye on your...

Scale LiPo Battery Voltage Checker is a multi-purpose scale accessory. This voltage checker replicates the look of a 12V battery, but features a display on the side that lets you keep an eye on your...

Complete V2 Roll Cage for Traxxas X-MAXX 6S/8S Body. It will fit Stock body only. 

NHX RC Wheelie Bar for X-Maxx 6S/8S not only durable buts its heavy duty Nylon construction with 2 loaded Springs , Ball Bearing Wheels with Rubber Tires  will make your truck wheelie hard on...

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

Features:For: 1/8 VehiclesMaterial: AluminumColor: RedSpecs:Adapter Hex: 17mmDiameter:22mmThickness: 8mmThread: 1.0mmIncludes:17mm Aluminum Wheel Nuts (4) Red

Features:For: 1/8 VehiclesMaterial: AluminumColor: BlackSpecs:Adapter Hex: 17mmDiameter:22mmThickness: 8mmThread: 1.0mmIncludes:17mm Aluminum Wheel Nuts (4) Black

.

.

Description: This is the new NHX 30mm Cyclone Turbo 540/ 550 Size Brushed / Brushless Fan with motor Heat Sink. This Fan spins at 28000 RPM which will keep your motor cool all the way till...

High Performance, Compact, & light weight NHX Q25 Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and...

The new NHX Tool Kit includes virtually every tool required to maintain RC vehicles and stores them in a tough handy carrying case. A comfortable Aluminum handle allows the 11 included magnetic bits...

.

1/10 On Road Tires & Aluminum Rims Features:1. Pre-Glue with Foam inserts included2. Materials: Aluminum Rims + Soft Rubber Tries3. Outer diameter: about 63 mm (2.48 inch)4. Width:...

Features: Perfect fit for 1/14 Tractor Truck.The hub is made of super strong aluminum alloy, durable and wear-resistant.Good grip and low rolling resistance.Super High quality anti-skid rubber...

Introducing from NHX RC this Engine Speaker Module for RC cars.Run electric RC but with real car engine noise!RC engine speaker module with 10 different engine sounds ranging from race and rally cars...

Introducing from NHX RC Engine Speaker Module for RC cars.Run electric RC but with real car engine noise!RC engine speaker module with 10 different engine sounds ranging from race and rally cars to...

Features: Aluminum BodySpecs : 117x19.7mm Fits : Slash 4x4 RearIncludes : 2x Oil Filled Shocks with Springs

Features: Aluminum BodySpecs : 117x19.7mm Fits : Slash 4x4 RearIncludes : 2x Oil Filled Shocks with Springs

Features: Aluminum BodySpecs : 117x19.7mm Fits : Slash 4x4 RearIncludes : 2x Oil Filled Shocks with Springs

Features: Aluminum BodySpecs : 102x19.7mm Fits : Slash 4x4 FrontIncludes : 2x Oil Filled Shocks with Springs

Features: Aluminum BodySpecs : 102x19.7mm Fits : Slash 4x4 FrontIncludes : 2x Oil Filled Shocks with Springs

.

Feature:For: Traxxas Slash 4x4, Stampede 4x4, Rustler 4x4, Hoss 4x4, XO-1Material: AluminumColor: BlueInclude:Aluminum Front Caster Block (2pc)

Features:  Made of Aluminum, Anodized in RedSpecs : 87x59mmFits : Slash 4x4 RearIncludes : 1x Rear Shock Tower

.

NHX +10mm/side extended 17mm hex hub wheel adapters for the Traxxas 1/10 Maxx. These increase the track width of the vehicle to increase stability and replace the existing hexes so the vehicle can...

.

.

Package Includes: 2x Upper Arms with Hinge Pins. 

Package Includes:Rear Knuckle Arm 2pcs

.

Package Includes: C-Hubs 2pcsKing Pin 4pcs

.

.

Feature:For: 1/10 RC CrawlersMaterial: PlasticColor: BlackInclude:Plastic Snorkel for SCX10 III Jeep Wrangler 1/10 Crawler

Feature:For: 1/10 RC CrawlersMaterial: PlasticColor: BlackInclude:Plastic Snorkel for Jeep Rubicon RC Body of 1/10 Crawler

.

.

.

M4X12mm Pin Screw Set (4pc)

Features: CNC machined solid brass billet - Adds 9g of low and central weight to lower and centralize the vehicle's center of gravity, increase its stability, and make it an - overall more capable...

.

.

Features: CNC machined billet aluminum construction - Black anodizing for durability, corrosion resistance, and great looksPackage Includes- One (1) aluminum skid plate - One (1) 4mm Cap Head M1.4 -...

.

Features: Billet CNC machined aluminum Front Bumper- Anodized a stylish flat black - Integrated brush guards - Light buckets for 3mm LED lights, winch fairlead for use with Axial SCX 24Includes:...

Features: The linkage set are much tighter than the stock steering linkage. - 6061 aluminum links, Black anodized - Steel pivot ballsIncludes: One tie rod with Steel Pivot Ball - One drag link with...

.

.

Includes: One Skid plate

Features: 6 TON Scale Adjustable Height Metal Jack Stand Repairing Tool for RC vehiclesSpecs : 73x50.5x44.5mmIncludes: 2 Jacks

.

.

Features: Aluminum BodySpecs: 67x17mm Fits: 1/10 Touring CarsIncludes: 2x Shocks with SpringsRequires: Filling with Shock Oil and Installation