NHX RC ezWall 4-8S NIMH AC Peak Battery Charger with Deans Plug 4.8 to 14.4V

NHX RC ezWall NiMH Peak Charger

Features:

Universal-voltage input, easy operation
Bi-Color LED, Status at a Glance
Short circuit protection
Reverse polarity protection
Want to get the most out of your batteries? You need to make sure you can deliver a full charge to your batteries with an NHX RC ezWall Peak Charger.
NHX RC ezWall is more than just a peak charger - it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the NHX RC ezWall offers voltage ranging from 4.8 to 14.4V at 1.2 amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks, and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receiver's pack.
Delta-V Peak detection
With the Delta Peak detection circuitry, the NHX RC ezWall allows your batteries to reach their total capacity when charging, so you can get the most power and run time from your batteries. It achieves this by using peak detection circuitry that monitors the voltage of the battery pack while it's being charged and automatically shuts the charger off when the packs' voltage peaks and then starts to drop. This is in contrast to a timed charger, where you often end up with a battery pack that's not fully charged.

Specs:

Input: AC100V-240V 50/60Hz
Battery Type: NiMH
Output Voltage: 4.8V-14.4V
Output Curent: 1.2A
Output Power: 18W Max.
Battery Cell: 4-8S
Output Cable Length: 70cm
Operating Temperature: 0℃-40℃
Relative Humidity: 5%-75%
Storage Temperature: -10℃ - 70℃
Storage Humidity: 5%-75%
Dimension: 85mm×50mm×54mm
Weight: 120g
Package Includes:

ezWall AC Peak Wall Charger with Deans Connector