NHX

NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers

(No reviews yet) Write a Review
SKU:
NHX6359
UPC:
685757835633
Condition:
New
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
  • NHX RC RCTEMP Infrared Temp Gun for R/C engines,ESC,Motors,Battery,Chargers
MSRP: $49.94
$34.95
— You save $14.99

Description

NHX RCTEMP Infrared Thermometer is a must-have for RC hobbyists to track the temperatures.

Now you can take temperature measurement at a safe distance with NHX RCTEMP. RC hobbyists will never get burned or air blowing in your face from the RC vehicles, engines, motors, chargers, etc., while taking measurements. You can trust NHX RCTEMP to get accurate temperature readings from a safe distance, wherever indoor or outdoor. NHX has engineered the RCTEMP temperature measuring with accuracy down to the 0.1 °F and the object temperatures ranging from -40°F (-40°C) to 716°F (380°C).

μm Accuracy Compared to its predecessor, NHX deploys a classic TO-46 housing thermopile sensor. The thermopile sensing element, composed of 116 elements of small thermocouples with an active area of diameter 545 μm on a silicon chip, absorb the energy and produce an output signal. It provides nearly Johnson-noise-limited performance, which can be calculated by its ohmic series resistance.

Distance-to-Spot Ratio 6:1 Every infrared thermometer has a "distance-to-spot" (D:S) ratio that tells you the diameter of the area being measured compared to the distance from the target. The RCTEMP thermometer has a distance-to-spot ratio of 6:1. That means it measures an approximately one-inch-diameter spot when it's 6 inches from the target (about 2.5 cm at 30 cm). It means RCTEMP  thermometer can accurately measure targets at greater distances compared to many other thermometers; Distance-to-spot ratio is crucial to measuring! So be sure to measure at this D:S ratio.

Quick and Accurate Readings Point, aim, tap: three steps to get accurate readings on the go within 1 second.

Easily Selectable Between Fahrenheit and Celsius To switch between Celsius and Fahrenheit, simply press the UNIT button. The value will be converted instantly, thanks to the pre-programmed algorithm.

Low-battery Indication Auto-power Off The thermometer display will indicate whenever low on battery. It will automatically power off after inactivity of 60 seconds. Battery life is extended!

Compact Design The ultra-compact design lets you slip it in your pocket, you can take it everywhere.

Impressive Stunning VA Display The VA invert display enables super-high static contrast ratios for impressive stunning visioning. Indoor or outdoor, you will get clear data reading from any angle.

Data at a Glimpse All data are presented on the screen: no scrolling, no tapping!

Versatile for The Hobby, Craft and Household Note: RCTEMP thermometer is not intended for human body temperature measurement, neither for the animal.

Four Measuring Modes

Quick Mode

Scan Mode

Maximum Mode

Minimum Mode

Multiple Emissivity Coefficients

The emissivity coefficient indicates the radiation of heat. For some products, the emissivity coefficients varies with the temperature.
As a professional infrared thermometer, NHX RCTEMP can be adjusted for different emissivity coefficients depending on the material to achieve the best measurement.

SURFACE MATERIAL

EMISSIVITY COEFFICIENT

Anodized Aluminum

0.77

Plastics

0.91

Rubber, hard glossy plate

0.94

Carbon pressed filled surface

0.98

As a guideline the emissivities listed are based on temperature 300 K.

 

NIST Traceable Calibration NIST traceable calibration certifies that the lab or manufacturer in question is equipped and able to calibrate equipment to National Institute of Standards and Technology (NIST) standards and that products by that manufacturer match NIST-maintained measurement standards. With NIST traceable calibration, any measurements taken with a certified instrument have an unbroken chain of measurement leading back to NIST-maintained standards with known and documented uncertainties for each step in the chain and a quality assurance program in place to address them. We not only ship products, but we're also delivering trust!

Beep Signals for Every Operation And Can Be Silenced

Specifications

Size and Weight

Dimension: 121x40x39.6mm
Weight: 75g

Other Parameters

Operation Voltage: AAA battery X 2
Operation Current: ≤40ma@3.0V
Operation Temperature: 0-50℃
Current Drain: ≤25ua@3V
Precision:
-40℃-0℃ +/-1.5℃
0℃-380℃ +/-1.5℃
-40℉~32℉ / ±3℉
32℉~716℉ / ±3℉
Adjustable Range for Infrared Emission Frequency: 0.01-1

 
View AllClose