Phoenix Flight Gear
PhantoMounts 6V BEC GIMBAL HARNESS
(No reviews yet)
Write a Review
- SKU:
- PHM-PH01
- Condition:
- New
Description
This harness comes with 2 servo extensions all soldered up and ready to plugin to your FC/Servos.
*For DJI F Series setups just solder to any set of +/- solder pads*
This is used to set the voltage to 6v for Hitec Servos for X468 mounts, PhantoMounts Or Any Servos That Run On 6v .
This can be used on any servo/servos that needs 6v for best performance.
Naza/WKM only put out 4.8v and it is not recomended to power the servos off the Naza/WKM.
This will allow you to power the servos direct from the battery.
Specs:
- Input: 6V-23V (2-5S Lipoly, 2-6S Li-Fe or 5-15S NiXX Battery Pack)
- Output: 6V/3A (Less than 50mV peak to peak voltage @ 2A)
- Dimension: 22.9mm x 20.3mm x 7.6mm (LxWxH)
- Weight: 9.1g (wires included)
Related Products
Related Products
Sold Out
PhantoMount X2 F550 2 Axis Wide Gimbal (Unassembled)
Phoenix Flight Gear
$99.95
Product Description
The PhantoMount X2 F550 gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec 5245
PHM-G003W
Sold Out
PhantoMount X2 F550 2 Axis Gimbal W/ Servos Fully Assembeld PHM-G003-A
Phoenix Flight Gear
$74.95
PhantoMount X2 F550 2 Axis Gimbal
(Assembled)
PHM-G003-A
Sold Out
PhantoMounts DJI F450 X2 CARBON FIBER WIDE 2 AXIS GIMBAL W/SERVOS
Phoenix Flight Gear
$74.95
PhantoMount X2 Wide F450 2 Axis Gimbal
(Assembled)
PHM-G002W-A
PHANTOMOUNT DJI F450 X2 C/F WIDE 2 AXIS GIMBAL PHM-G002W
Phoenix Flight Gear
$49.95
PhantoMount X2 F450 2 Axis Wide Gimbal
(Unassembled)
PHM-G002W
PHANTOMOUNT X2 CARBON FIBER 2 AXIS GIMBAL DJI PHANTOM FC40 PHM-G001
Phoenix Flight Gear
$49.95
PhantoMount X2 Phantom 2 Axis Gimbal
(Unassembled)
PHM-G001
Sold Out
PhantoMounts X2 Carbon Fiber Assembled 2 Axis Gimbal w/Servos DJI Flamewheels
Phoenix Flight Gear
$74.95
PhantoMount X2 F450 2 Axis Gimbal
(Assembled)
PHM-G002-A
PhantoMounts X2 C/F WIDE 2 AXIS GIMBAL FOR DJI PHANTOM FC40 PHM-G001W
Phoenix Flight Gear
$49.95
Product Description:
The PhantoMount X2 Phantom gimbal frame and mounting plate is made of 1.5mm carbon fiber. Designed to work on many platforms this gimbal utilizes two HiTec
PHM-G001W
Sold Out
PhantoMounts DJI PHANTOM FC40 X2 CARBON FIBER 2 AXIS GIMBAL ASSEMBLED W/ SERVOS
Phoenix Flight Gear
$59.95
PHM-G001-A
Traxxas 2261 Y-harness BEC : TRX-4
Traxxas
$4.00
The Y-harness allows you to power two high-voltage accessories at the same time such as the Pro Scale winch and LED lighting system.Accessory part for these models:TRX-4® 1979 Chevrolet® BlazerTRX-4®...
TRA2261