Pro-Line PRO1020511 1/6 Menace HP Belted F/R Tires w/ Black Raid 24mm Wheels (2)

Key Features
Lightweight, BELTED, and Durable
BELTED Tire Handles Extreme Power and High Speeds with Ease
Racing-inspired Tread, Great for Speed-runs
Raid Wheel with Replaceable 24mm Hexes to fit KRATON™ 8S or X-MAXX®
Made in the USA, since 1982

 In The Box
(2) Menace HP Belted F/R Tires Mounted on Black Raid 24mm Wheels
(2) Foam Inserts
(2) KRATON™ 8S 8x48 24mm Wheel Hexes
(2) X-MAXX® 8x48 24mm Wheel Hexes
(16) M3x16 Socket Head Screws

This is a pair of Menace HP 5.7" tires. Pro-Line has taken our lightweight belted tire & wheel combination for X-MAXX® and KRATON™ 8S to the next level with our highest-performance street tire ever: The Menace HP mounted on Raid 5.7" Wheels! Pro-Line Menace tires are 1:1 racing-inspired tread design to give your rig massive traction on your street, parking lot, or track.

The Menace HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here! Transform the handling of your truck with the low-profile carcass, deep grooves, and long-lasting compound, also great for speed runs! These tires and Raid 5.7" wheels have been developed from the ground up to be lightweight and durable enough to handle extreme X-MAXX® and KRATON™ 8S punishment to give you the best all-around bashing experience possible.

The Raid 5.7" Black Wheel now features a removable hex for ultimate versatility! Not only do the included hexes allow you to choose between the KRATON™ 8S and X-MAXX® axle sizes, but they also allow you to easily replace a damaged wheel hex without needing to replace your glued tires and eliminate the need for other adapters or wheel modification. The hefty 8x48 interlocking hex design is secured to the wheel by 8 M3 screws that are spaced 48mm across. Replacement Hexes are available separately (PRO638300).

Please note that the Menace HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Menace HP tires that is 75 mph or about 3,200 RPM. Overrevving your Menace HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two, or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.

Please note: All tires & wheels are sold in pairs, unless otherwise noted

Features
TIRE FEATURES
Lightweight, BELTED, and Durable
BELTED Tire Handles extreme Power and High Speeds with Ease
Racing-inspired Tread, great for speed-runs
Maximum Long Lasting Street Traction
Foam Inserts Included
Made in the USA, since 1982

WHEEL FEATURES
Easily Replace Damaged Hexes
KRATON™ 8S or X-MAXX® 8x48 24mm Hexes are Included
24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles
Wheel Made from High-strength, Durable DuPont Nylon Material
Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels
M3 Wheel Hex Hardware Included
Made in the USA, since 1982

Fits
KRATON™ 8S (ARA5808V2) Front or Rear
X-MAXX® Front or Rear
Other Large-Scale Vehicles with 24mm Hexes

Product Specs
Wheel Type
Raid 8x48
Insert Material
Open Cell
Product Height
8" (203 mm)
Quantity Option
2 in a package
Wheel Hex Size
24mm
Package Type
Pre-Mounted
Tire Type
Street
Wheel Position
Front/Rear
Tire Tread
Menace HP BELTED
Vehicle Type
All-Road
Inner Tire / Outer Wheel Diameter
5.7 in
Product Width
3.67" (93 mm)
Compound / Hardness
Soft
Color
Black
Scale
1/6