Description
Evolution For Racing Drone
6MS Ultra Low Latency
Super-WDR
Micro Size
FOV 160 (1.8mm lens)
FOV 145 (2.1mm lens)
AIO Switchable
4:3
Widescreen
NTSC
PAL
Joystick Control
UART Control
Joystick Control & UART Control Switchable
The top left corner of the screen will shortly display the current control mode.
The default is Joystick control mode.
Short the two camera control pins
RunCam Racer 2
Then power on, camera will auto switch between the two modes
The mode can be saved after power off. After switching to the desired mode, please unplug the short-circuit cable.
UART Control works with Flight Controllers:
BetaFlight 3.3 or above / ButterFlight 3.4 or above / CleanFlight 2.2 or above
The top left corner of the screen will shortly display the current control mode.
The default is Joystick control mode.
Short the two camera control pins
RunCam Racer 2
Then power on, camera will auto switch between the two modes
The mode can be saved after power off. After switching to the desired mode, please unplug the short-circuit cable.
UART Control works with Flight Controllers:
BetaFlight 3.3 or above / ButterFlight 3.4 or above / CleanFlight 2.2 or above
Package
1x Camera
1x 1928 ABS bracket
1x 6pin FPV silicone cable
1x Set of screws
1x SELECTOR
1x Manual
Parameters
Model | RunCam Racer 2 | ||
Image Sensor | Super WDR CMOS Sensor | ||
Horizontal Resolution | 700TVL | ||
Lens |
| ||
Screen Format | 4:3 / Widescreen Switchable | ||
Signal System | NTSC / PAL Switchable | ||
Mirror/Flip | Available | ||
Integrated OSD | Yes | ||
One Touch Scene Setting | Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight | ||
S/N Ratio | >50dB | ||
Electronic Shutter Speed | Auto | ||
Min. Illumination | 0.01Lux@1.2F | ||
WDR | Super WDR | ||
Day/Night | Auto | ||
Menu Control | Joystick Control / UART Control Switchable | ||
Power | DC 5-36V | ||
Current | 110mA@5V / 40mA@12V | ||
Housing Material | ABS | ||
Net Weight | 5.5g | ||
Dimensions | L19mm*W19mm*H18mm |