Misc. Hardware

Key FeaturesFactory replacement partMade of foamOverviewThis is a Blade factory replacement part.Please note: There is no other parts included. This is just the foam.Compatible ProductsBlade FPV Manta Airframe Only BLH01001 is compatible with BLH01000

These 36" antenna housings work great for airplanes, cars, boats, and helicop- ters.

Replace broke or lost antenna tubes with the Dubro Antenna Tubes. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire. FEATURES Plastic...

Custom make your own muffler extension. Will fit most engines .29 to .80 and most mufflers. This stock can be cut, drilled, tapped, and welded. Comes 1 per package. Dimensions: OUTSIDE INSIDE Width: 1.75" ...

This is a standard replacement Antenna Tube Assortment with Caps from Dubro. This item can be used anywhere an antenna tube is needed to support a receiver antenna wire. FEATURES ...

This is an assortment of six Antenna Tubes with Caps by Dubro. FEATURES Plastic construction, assorted colors INCLUDES Six...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

There's no need to use a hammer, with Dubro's easy on/easy off spinners. Just press-fit the nylon lock nuts to the backplate, align the nose cone core to the backplate with the four included pins, and secure the nosecone with the included socket head...

Install your battery switch in minutes by drilling one 3/16" hole. It's design- ed to fit most radio switches and is ideal for use in planes, helicopters, and cars. It is adjustable to any wall thickness up to 3/8".

.