ADX-10

This is the Buggy Shock Body Set from Arrma.FEATURESFits the Arrma Raider Brushed & Brushless, and the ADX-10 Brushed &BrushlessComposite plastic construction, black in colorSuper-smooth threading for fast and easy shock cap fittingINCLUDESTwo 1...

This is the Arrma Front Bumper and Rear Chassis Plate.FEATURESFits the Arrma Raider, ADX-10, Vortex, Granite, Fury and MojavevehiclesPlastic construction, black in colorINCLUDESArrma Front Bumper and Rear Chassis Plate

This is the 12mm Wheel Hex Set from Arrma.FEATURESFits all Arrma vehiclesMolded nylon construction with drive pin shlotINCLUDESTwo 3.4 x 12mm Front Wheel HexesTwo 5 x 12mm Rear Wheel HexesTwo 4 x 12mm Front Wheel HexesTwo 4 x 12mm Rear Wheel Hexes

This is the Buggy Body Mount Set from Arrma.FEATURESComposite plastic construction, black in colorFits the Arrma ADX-10 buggyINCLUDESFront and Rear Body Mounts

This is a pair of two Arrma 3x43mm Shock Shafts.FEATURESFits the shocks used in the Arrma Raider Mega, Raider BL5, ADX-10,ADX-10BLX, Raider and Raider BLXLow-friction coated material for super-smooth shock actionINCLUDESTwo Arrma 3x43mm Shock ShaftsTwo...

This is the Rear Shock Tower Brace from Arrma.FEATURESAluminum constructionFits the Arrma Raider, Fury, ADX-10, Vortex, Granite, and MojaveINCLUDESRear Shock Tower Brace

This is the Shock Piston and Shaft Guide Set from Arrma.FEATURESFits all Arrma vehicle shocksTwo-hole shock pistons for optimum shock oil performance on a widerange of surfacesShock guides ensure smooth and easy shock shaft operation in...

This is a pair of two Arrma 3x51mm Shock Shafts.FEATURESFits the shocks used in the Arrma Raider, Raider Mega, Raider BLS,Raider BLX, ADX-10 and ADX-10BLXLow-friction coated material for super-smooth shock actionINCLUDESTwo Arrma 3x51mm Shock...

These are the 3 x 37.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the inner part of the front suspension arms in placeINCLUDESTwo 3 x 37.5mm Screw Hinge Pins

This is the Rear Shock Spring Set from Arrma.FEATURESSteel constructionFits the rear shocks used on the Arrma Raider and ADX-10INCLUDESTwo 2.7" (68mm) long Rear Shock Springs

This is a Diff Case Gasket from Arrma.FEATURESFits all Arrma vehiclesConstructed of composite materialINCLUDESDiff Case Gasket

This is the 81 Tooth 48 pitch Spur Gear from Arrma.FEATURESComposite plastic constructionStock spur gear used in the Arrma Raider and ADX-10Optional for the Arrma Vortex, Granite, Fury and Mojave vehiclesINCLUDES81 Tooth 48 pitch Spur Gear

This is the 48 Pitch 15 Tooth Pinion Gear from Arrma.FEATURESHardened steel constructionStock replacement pinion gear for the Arrma Raider and ADX-10INCLUDES48 Pitch 15 Tooth Pinion Gear with Set Screw

This is a package of two 2014 spec Slipper Pads from Arrma.FEATURESFits all Arrma vehiclesConstructed of hard-wearing composite friction materialLow friction slipper pad surface for consistent slipper clutchoperationINCLUDESTwo 2014 spec Slipper Pads

The MEGA brushed ESC jumper is the brains behind adjusting the MEGA speed controller. This item is used to program the features of the NiMh battery mode or the LiPo battery mode (Low Voltage cutoff enabling). You can also adjust whether or not to enable...

This is a package of four 5x1mm O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour 5x1mm O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")Thickness: 1mm (0.039")

This is a pair of 3x48mm Turnbuckles from Arrma.FEATURESSteel constructionFits the Arrma Raider and ADX-10INCLUDESTwo 3x48mm Turnbuckles

These are the 3 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the the front upper suspension arms in placeINCLUDESTwo 3 x 29.5mm Screw Hinge Pins

This is a package of 5x8x0.5mm Washers from Arrma.FEATURESSteel constructionFits the Arrma Fury, Granite, Raider, Vorteks, ADX10, Mojave, andany other application requiring a washer of this sizeINCLUDESTen 5x8x0.5mm WashersSPECIFICATIONSInside...

These high-quality steel washers provide replacement parts for your kit supplied items, or an alternate option for many vehicles in our range.FEATURES:Strong and durable steel for long-lasting performance in all conditions - Precision manufactured for...

This is a package of four P-5 O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour P-5 O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")