Fury Mega

This Fury Painted Decaled Trimmed Body is the perfect replacement for the kit supplied item.In the Box(1) Fury Painted Decaled Trimmed Body (Red)FeaturesHigh-quality molded bodyHead-turning paint schemePre-decaled with ARRMA vinyl stickers that add...

This Fury Painted Decaled Trimmed Body is the perfect replacement for the kit supplied item.In the Box(1) Fury Painted Decaled Trimmed Body (Blue)FeaturesHigh-quality molded bodyHead-turning paint schemePre-decaled with ARRMA vinyl stickers that add...

This Fury Painted Decaled Trimmed Body is the perfect replacement for the kit supplied item.In the Box(1) Fury Painted Decaled Trimmed Body (Green)FeaturesHigh-quality molded bodyHead-turning paint schemePre-decaled with ARRMA vinyl stickers that add...

This is the 2014 Style Clear Body for the Arrma Fury Short Course Truck.FEATURESFits all versions of the Arrma FuryMolded from clear polycarbonate plasticPrecut vinyl decal sheet for easy installationINCLUDES2014 style Clear Body for the Arrma FuryDecal...

This high-quality Fury Clear Body is perfect for creating a custom painted look for your ARRMA vehicle.In the Box1) Clear Fury Bodyshell(1) Fury Decal Sheet(1) Fury Window Mask SheetFeaturesTough polycarbonate for increased impact resistance and...

This Chassis Set provides the perfect replacement parts for your kit items.In the Box:(1) Left Side Chassis Mold(1) Right Side Chassis MoldFeaturesTough composite material for long-lasting durability during extreme RC actionPrecision manufactured...

This is the Wheelie Bar Set for the Arrma Granite, Fury, and Raider Vehicles.FEATURESPlastic construction, black in colorPrevents vehicle from flipping over backward during wheeliesINCLUDESWheelie Bar Set with Hardware

 Aluminum Upper (4pcs) and Lower (4 pcs) shock caps for Granite, Vorteks, Fury, Raider, (Blue)The CNC Machined aluminum upper shock caps adds improved durability to your vehicle and the lower shock caps keep the shock shaft operating smooth and...

This is the Rear Bumper and Body Mount Setfor the Arrma Fury Mega and BLX Short Course Truck.FEATURESMolded from tough composite plastic, matte black in colorAdjustable body mounting system allows for 2mm adjustments to matchheight of vehicle body (range...

This Steering Parts Set will allow you to service the items that are responsible for supporting your ARRMA Steering Servo and Steering Plate assembly.Features:Super-tough composite material for increased impact resistance and long-lasting operation in...

This is the Six Piece Arrma Steering Block and Rear Hub Carrier Set.FEATURESFits the Arrma Raider, ADX-10, Vortex, Granite, Fury and MojavevehiclesPlastic constructionINCLUDESTwo Steering Blocks and Rear Hub Carriers

This Lower Skid and Bumper Mount Set is an ideal replacement for your kit item.(1) Lower Skid(2) Bumper Loops(1) Bumper MountFeaturesTough composite constructionBumper loops provide cushioning against hard impacts

This high-quality composite Body Mount Set provides direct replacement parts for your kit items.(8) M3x10 Button Head Screw(1) Body Mounting Frame Front(1) Body Mounting Frame Rear(2) Dummy Fire Extinguisher(2) Dummy Vents(1) Foam PadFeaturesTough...

This is the optional Arrma 2014 Spec Aluminum Lower Plate.FEATURESFits the brushed and brushless versions of the Fury, Granite,Raider and VorteksReplaces stock composite lower chassis plateHigh-quality aluminium for increased chassis strengthINCLUDESOne...

This is the Truck Shock Body Set from Arrma.FEATURESFits the Arrma Fury, Granite, Vorteks and Mojave trucksComposite plastic construction, black in colorSuper-smooth threading for fast and easy shock cap fittingINCLUDESTwo 1.4" (37mm) Front Shock...

.

This is a pair of 83mm Dog Bones from Arrma.FEATURESFits the Arrma Fury Mega, Fury BLX, Granite Mega, Granite BLX,Raider XL Mega, Raider XL BLX and the Vorteks Mega,Steel constructionINCLUDESTwo 83mm Dog Bones

This 60.5mm Input Shaft is specially designed to provide smooth and consistent gear operation for your ARRMA gearbox assembly.FeaturesSuper-tough steel 60.5mm Input Shaft for long-lasting durability in all conditions - Hard-wearing composite Input Shaft...

This is the Arrma Front Bumper and Rear Chassis Plate.FEATURESFits the Arrma Raider, ADX-10, Vortex, Granite, Fury and MojavevehiclesPlastic construction, black in colorINCLUDESArrma Front Bumper and Rear Chassis Plate

This is a pair of two Arrma 3x55mm Shock Shafts.FEATURESFits the shocks used in the Arrma Fury, Fury Mega, Fury BLX, FuryBLS, Vorteks, Vorteks Mega, Vorteks BLS, Granite, Granite BLX,Mojave, Mojave BLX, Raider XL BLX and Raider XL MegaLow-friction coated...

 CNC  Machined Alum. Threaded front shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (BLACK/BLUE)Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum...

 Machined Alum. Threaded front shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (BK/GM) Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material allows...

 CNC  Machined Alum. Threaded front shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (BK/R)Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material...

 Machined Alum. Threaded front shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (Blue/Blue)Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material allows...

This high-quality Shock Tower Set provides the ideal replacement part for you kit supplied item.(1) Front shock tower(1) Rear shock towerFeaturesTough composite material for long lasting durabilityPrecision manufactured for consistent fit and easy...

Description RPM is synonymous with strength and durability, plus we’re known for taking the extra steps to design unique parts worthy of your favorite ride. That’s why we’re releasing these front upper and lower A-arms for the...

Add more strength and reduce the amount of flex in the upper shock mounting area of your Arrma Granite/Raider, XL/ Vorteks and Fury with this high quality CNC Machined aluminum front shock tower brace.

This is the 12mm Wheel Hex Set from Arrma.FEATURESFits all Arrma vehiclesMolded nylon construction with drive pin shlotINCLUDESTwo 3.4 x 12mm Front Wheel HexesTwo 5 x 12mm Rear Wheel HexesTwo 4 x 12mm Front Wheel HexesTwo 4 x 12mm Rear Wheel Hexes

This is the one piece Motor Mount from Arrma.FEATURESAluminum construction with polished natural finishFits the Arrma Raider, Fury, ADX-10, Vortex, Granite, and MojaveINCLUDESMotor Mount

This is a pair of two Arrma 3x45mm Shock Shafts.FEATURESFits the shocks used in the Arrma Fury Mega, Fury BLX, Granite,Granite Mega, Granite BLX, Raider XL Mega, Raider XL BLX, VorteksMega, Vorteks BLS, Vorteks BLX, Fury Mega, Fury BLX, Fury BLS,Mojave...

These high-quality wheel axles are manufactured from durable material that will provide long-lasting performance when the bashing action is extreme.In The Box(2) 31mm Front Wheel AxleFeaturesPrecision machined from high-quality material for precise fit...

This Nerf Bar Set is an ideal replacement part for your ARRMA vehicle.(2) Nerf BarsFeaturesDurable composite material for long-lasting side impact protection during the most extreme RC conditionsPrecision mounting holes for fast and easy fit and removal

This is the Arrma 20 Tooth Input Shaft Gear.FEATURESHardened steel constructionFits the Arrma Fury Mega, Fury BLX, Fury BL5, Granite Mega,Granite BLX, Granite BL5, Raider Mega, Raider BL5, Raider XL BLX,Vorteks Mega and Vorteks BL5INCLUDESArrma 20 Tooth...

This is a pair of 3x71mm Turnbuckles from Arrma.FEATURESSteel constructionFits the Arrma Vortex, Granite, Mojave and FuryINCLUDESTwo 3x71mm Turnbuckles

Description You’re tired of breaking stock rear A-arms, right? It usually happens when you’re at your favorite bash spot and there isn’t a hobby store within 50 miles too. That’s why we came up with our rear A-arms for...

This high-quality Bumper Loop Set provides fresh parts for mounting your front and rear bumpers to your ARRMA vehicle.(1) Front Bumper Loop(1) Rear Bumper LoopFeaturesTough composite material for long-lasting vehicle protection and increased impact...

These are the Front Axle Shafts from Arrma.FEATURESStock front axle shafts used on the Arrma Raider, ADX-10, Vortex,Granite, Fury and MojaveINCLUDESTwo Front Axle Shafts

These are the Arrma Foam Battery Spacers.FEATURESFoam construction, black in colorFits all Arrma 1/10 scale vehiclesHelps with positioning and cushioning different size battery packsINCLUDESTwo Slim Foam Strips to reduce rattlingTwo Battery Spacer Foams...

This is the Rear Shock Tower Brace from Arrma.FEATURESAluminum constructionFits the Arrma Raider, Fury, ADX-10, Vortex, Granite, and MojaveINCLUDESRear Shock Tower Brace

This is the Front Shock Spring Set from Arrma.FEATURESSteel constructionFits the front shocks used on the Arrma Vortex, Granite, Fury andMojaveINCLUDESTwo 1.9" (49.5mm) long Front Shock Springs

This is the Rear Shock Spring Set from Arrma.FEATURESSteel constructionFits the rear shocks used on the Arrma Vortex, Granite, Fury andMojaveINCLUDESTwo 2.7" (69.5mm) long Rear Shock Springs

This is the Shock Piston and Shaft Guide Set from Arrma.FEATURESFits all Arrma vehicle shocksTwo-hole shock pistons for optimum shock oil performance on a widerange of surfacesShock guides ensure smooth and easy shock shaft operation in...

The CNC Machined Aluminum Hex adapters features set-screws that pins the hex adapters to the axle so the hex adapter does not fall off and cause you to lose the drive pin when you remove your wheels.  Aluminum hex adapters are more durable over the...

The CNC Machined Aluminum Hex adapters features set-screws that pins the hex adapters to the axle so the hex adapter does not fall off and cause you to lose the drive pin when you remove your wheels.  Aluminum hex adapters are more durable over the...

The CNC Machined Aluminum Hex adapters features set-screws that pins the hex adapters to the axle so the hex adapter does not fall off and cause you to lose the drive pin when you remove your wheels.  Aluminum hex adapters are more durable over the...

The CNC Machined Aluminum Hex adapters features set-screws that pins the hex adapters to the axle so the hex adapter does not fall off and cause you to lose the drive pin when you remove your wheels.  Aluminum hex adapters are more durable over the...

These are the 3 x 37.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the inner part of the front suspension arms in placeINCLUDESTwo 3 x 37.5mm Screw Hinge Pins

These are the Standard 2.5 x 31mm Heavy Duty Hinge Pinsfor the Raider, Fury, and Vorteks BLX Brushless RTR Vehicles.FEATURESSteel constructionINCLUDESFour 2.5 x 31mm Hinge Pins with four LocknutsSPECIFICATIONSLength: 1.2" (31mm)Diameter: 0.098"...

This is a package of ten Arrma 3x8mm Cap Head Screws.FEATURESSteel construction, black in colorUsed in the assembly of Arrma vehicles, may also be used in anyapplication a screw this size is requiredINCLUDESTen 3x8mm Cap Head ScrewsREQUIREMENTS2.5mm hex...

Machined Alum. Threaded Rear shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (Black/Blue) Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material allows...

Machined Alum. Threaded Rear shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (BK/GM) Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material allows for...

Machined Alum. Threaded Rear shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (B/B) Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material allows for much...

Machined Alum. Threaded Rear shock bodies w/O-ring collar, Granite, Vorteks, Raider, Fury (Red/Red) Our threaded shock bodies features O-ring shock collars that holds your spring pre-load adjustment precisely.  The aluminum material allows for...

This high-quality Wire Management and Guard Set provides direct replacement parts for your kit items.In the Box(4) M3x12 Button Head Screw(1) Servo Wire Management Clip(2) M3x8 Button Head Screw(1) 40mm Fan Cover(1) Front Bumper Mount Blanking...

These high-quality steel Hinge Pins provide direct replacement parts for your kit supplied items. In The Box(2) 4x63mm Hinge PinsFeaturesStrong steel for long-lasting durabilityPrecision manufactured for smooth operation and fast...

These Body Clips and Caps provide ideal replacement parts for your kit supplied items.In the box:(2) Body Clips with CapsFeaturesStrong and durable steel material for long-lasting performance and secure bodyshell fitCaptured design prevents clip...

This is the 87 Tooth 48 pitch Spur Gear from Arrma.FEATURESComposite plastic constructionStock spur gear used in the Arrma Vortex Granite, Fury and MojaveOptional for the Arrma Raider and ADX-10INCLUDES87 Tooth 48 pitch Spur Gear

This is a Diff Case Gasket from Arrma.FEATURESFits all Arrma vehiclesConstructed of composite materialINCLUDESDiff Case Gasket

This is a package of two 2014 spec Slipper Pads from Arrma.FEATURESFits all Arrma vehiclesConstructed of hard-wearing composite friction materialLow friction slipper pad surface for consistent slipper clutchoperationINCLUDESTwo 2014 spec Slipper Pads

The MEGA brushed ESC jumper is the brains behind adjusting the MEGA speed controller. This item is used to program the features of the NiMh battery mode or the LiPo battery mode (Low Voltage cutoff enabling). You can also adjust whether or not to enable...

This is a package of four 5x1mm O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour 5x1mm O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")Thickness: 1mm (0.039")

These are the 2.5 x 25mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite, Fury andMojave to hold the outer part of the suspension arms in placeINCLUDESTwo 2.5 x 25mm Screw Hinge Pins

These are the 2.5 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the outer part of the rear suspension arms in placeINCLUDESTwo 2.5 x 29.5mm Screw Hinge Pins

These are the 3 x 29.5mm Screw Hinge Pins from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto hold the the front upper suspension arms in placeINCLUDESTwo 3 x 29.5mm Screw Hinge Pins

This is the O-Ring Set from Arrma.FEATURESUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyinside the front and rear shocksINCLUDESFour Large and two Small O-Rings

These are the 7 x 4.6 x 6mm Steering Bushings from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyin the steering assemblyINCLUDESTwo 7 x 4.6 x 6mm Steering Bushings

These Foam Body Washers provide cushioning between the body mount platform and the body shell of your vehicle. They have been designed to securely fit to the body mount of your ARRMA vehicle so that they do not fall-off when the body shell is removed...

This is a pair of Large Cap Head 3x6mm Motor Screwsfor the Raider, Fury, and Vorteks BLX Brushless Vehicles.FEATURESSteel constructionINCLUDESTwo Large Cap Head 3x6mm Motor Screws

This is a package of 5x8x0.5mm Washers from Arrma.FEATURESSteel constructionFits the Arrma Fury, Granite, Raider, Vorteks, ADX10, Mojave, andany other application requiring a washer of this sizeINCLUDESTen 5x8x0.5mm WashersSPECIFICATIONSInside...

These high-quality steel washers provide replacement parts for your kit supplied items, or an alternate option for many vehicles in our range.FEATURES:Strong and durable steel for long-lasting performance in all conditions - Precision manufactured for...

This is a package of ten E4 E-Clips from Arrma.FEATURESSteel constructionUsed in the assembly of Arrma vehicles, may also be used anywhere anE-clip this size is requiredINCLUDESTen E4 E-Clips

These are the 4 x 2.5 x 13mm Screw Shafts from Arrma.FEATURESSteel constructionUsed on the Arrma Raider, Fury, ADX-10, Vortex, Granite and Furyto help secure the body mountsINCLUDESFour 4 x 2.5 x 13mm Screw Shafts

This is a package of four P-5 O-Rings from Arrma.FEATURESSilicone rubber constructionUsed in all Arrma vehiclesINCLUDESFour P-5 O-RingsSPECIFICATIONSInner Diameter: 5mm (0.197")