EB410

One (1) set of wheels (BLUE) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (GREEN) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (PINK) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (RED) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (WHITE) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

One (1) set of wheels (YELLOW) for use on the Losi 22-4 / Tekno EB410 (front).These wheels are for the Losi 22-4 / Tekno EB410 buggies (front). Sets of four (4).

Replacement Aero S-Type Tekno EB410 | ET410 rear wing only, 2pc.

Titanium long steering crank posts with 2mm hex head for the EB410. Eliminates the problem of not being able to to push down on the posts when screwing them into the bulkheads with a socket driver. Lightweight, smooth fitting, heavy duty and a great...

6061 alloy rear sway bar mount for the EB410 series using forward shock setups.Simple and precise sway bar mount that allows you to run the popular rear end setups that use the shocks forward and arms reversed.Uses the stock hardware and requires the use...

Precision machined 7075 alloy rear clamping hex set for the Tekno EB410 and ET410.This 6.5mm wide hex is +2mm (per hex) compared to the stock hex allowing you to tune the width of your buggy.6.5 hexes can be used with the front or rear axles.Polished and...

Precision machined 7075 alloy rear clamping hex set for the Tekno EB410 and ET410.This 7.5mm wide hex is +3mm (per hex) compared to the stock hex allowing you to tune the width of your buggy.7.5 hexes are for use the rear axles only.Polished and anodized...

TKR8104 – Bell Cranks and Top Plates (requires TKR8100, EB/NB/ET/NT/SCT/MT)TKR8104 includes several all new parts to improve steering response and support the TKR8100 Ackermann plate. New bell cranks accommodate the extended mounting locations for the...