Spur Gears

VFD 21% Light Weight Machined Transfer Case Gear Set. This gear set replaces the gears in the VFD Transfer Case (not VFD Twin). These are machined steel 48P gears with a narrower profile to reduce mass inside the transmission. Includes metal bearing...

VFD Machined Transfer Case Gear Set. This gear set replaces all sintered gears inside of the transfer case of the VFD Twin transmission. These are heavy duty machined steel 48P gears that will work in any VFD Twin Transmission. The idler gear assembly is...

Heavy Duty Machined Steel 48P Gear set for the Vanquish VFD Transmission.  Replacement part for VPS09003 and VPS09004 VS4-10 Pro KitOption part for the VPS10152 VFD Transmission Kit

PRODUCT DESCRIPTIONMachined Steel 26t Gear set for the Vanquish VFD Transmission Transfer Case.  Provides a 21% OverdriveOverdrive is defined as the percentage difference between the gear ratio at the front wheels vs the ratio at the rear...

Robinson Gen3 High Performance Slipper Unit for                       the Traxxas Revo 3.3.FEATURES: Steel spur...

This is an optional 65T Steel Spur Gear / Slipper Pad / Backplate / Bearing for the Traxxas E-Revo with Mamba system from Robinson Racing. FEATURES: Steel constructionSilver in color INCLUDES: 65 tooth steel spur gearAluminum back plateHex...

Optional parts for INFERNO MP10 series.59T spur gear with 0.8 module gear pitch. Fits IF403B diff case (small)The 0.8 module, which is finer than the conventional 1.0 module, and the finer tooth shape enables smooth acceleration. In addition, by enabling...

Optional parts for INFERNO MP10 series.60T spur gear with 0.8 module gear pitch. Fits IF403B diff case (small)The 0.8 module, which is finer than the conventional 1.0 module, and the finer tooth shape enables smooth acceleration. In addition, by enabling...

VFD Light Weight Machined Front Gear Set. These two gears are the first two gears inside the transmission. These are a machined steel 48P gear set that has been narrowed and excess gear material has been machined away to remove mass from the transmission...

VFD Machined Front Gear Set. These two gears are the first two gears inside the transmission. These are heavy duty machined steel 48P gears that will work in any VFD or VFD Twin Transmission.  Package Includes:1pc - 52t 48p Lower Gear1pc - 23t...

Fine-tune the speed and acceleration of the Savage XL Octane with this selection of tough metal clutch bells and spur gears.The more teeth on the clutch bell (or fewer the teeth on the spur gear) the more top speed with slightly reduced acceleration,...

.

This slipper set is supplied pre-built and ready to install in your vehicleFEATURESPrecision manufactured aluminum slipper hub takes drive to the rear transmissionDurable composite 91 tooth, 48dp spur gear for reliable power handling...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 50T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 50T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 50T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 55T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 55T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 55T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

This Slipper Set is supplied pre-built and ready to install in your vehicle.FEATURESDurable composite 61 tooth, 0.8MOD spur gear for reliable power handling capabilityBuilt around a strong red anodized aluminum slipper shaftMolded composite nut to set...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 54T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 54T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 55T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 56T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 56T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 56T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Made from medium carbon steel for greater durability.Precise measurements for smooth operation.Number of teeth: 56T, modulu: 0.8mm, 32 pitch.Original stock part number : ARA310948.Suitable models : Arrma 1/8 VENDETTA 4X4 3S-ARA4319V3, INFRACTION...

Specifications:CNC MachinedHardened SteelGear Ratio: 43/13 = 3.3:1Weight: 1.12oz / 32gWhat's Included:1x Heavy Duty Bevel Gear Set 43T/13T

Specifications:CNC MachinedHardened SteelGear Ratio: 36/14 = 2.57:1Weight: 1.05oz / 30gWhat's Included:1x Heavy Duty Bevel Gear Set 36T/14T

This is the optional Robinson Racing Hardened Steel 32P 54T Spur Gear for use on the Associated SC10. FEATURES: Hardened steel construction INCLUDES: One 32P 54T Spur Gear REQUIRES: Installation on the vehicle SPECS: Outer Diameter: 44.3mm (1.7")Inner...

Robison Racing Hardened Steel 1.0 Mod 46T Spur Gear       for use on the HPI 1/8 Savage X 4.6 RTR Nitro TruckFEATURES: Hardened steel constructionINCLUDES: One 46T 1.0 Mod Spur...

Optional Robison Racing Hardened Steel 1.0 Mod 48T Spur Gear       for use on the HPI 1/8 Savage X 4.6 RTR Nitro TruckFEATURES: Hardened steel constructionINCLUDES: One 48T 1.0 Mod Spur...

Made from medium carbon steel, stronger and great durability to achieve smooth driving performance.Firmly hold the spur gear for stable gear function.Package includes : M0.6 module spur gear 70T-1pc ; Spur gear holder-1pc.Original stock part number :...

This is the Metal Gear Setfor the Arrma ADS-7M V2, and ADS-15M V2 Steering Servos.FEATURESReplaces worn gears and restores proper operationSuper strong metal gears for durability and crash damage resistanceINCLUDES1st, 2nd, 3rd and Output GearTwo Ball...

Key FeaturesFits: Traxxas X-Maxx E-REVO 2.0 / Maxx / 1/7 XO-1Gear Material: Hardened Steel for maximum durabilityGear Pitch: MOD 1Overall Diameter: 48mm / 1.9inGear face Width: 8mm/0.31inPackage includes:46T MOD 1 Hardened Steel Spur Gear

Key FeaturesFits: Traxxas X-Maxx E-REVO 2.0 / Maxx / 1/7 XO-1Gear Material: Hardened Steel for maximum durabilityGear Pitch: MOD 1Overall Diameter: 52mm / 2inGear face Width: 8mm/0.31inPackage includes:50T MOD 1 Hardened Steel Spur Gear

Key FeaturesFits: Traxxas X-Maxx E-REVO 2.0 / Maxx / 1/7 XO-1Gear Material: Hardened Steel for maximum durabilityGear Pitch: MOD 1Overall Diameter: 54mm / 2inGear face Width: 8mm/0.31inPackage includes:52T MOD 1 Hardened Steel Spur Gear

Key FeaturesFits: Traxxas X-Maxx E-REVO 2.0 / Maxx / 1/7 XO-1Gear Material: Hardened Steel for maximum durabilityGear Pitch: MOD 1Overall Diameter: 55.8mm / 2.3inGear face Width: 8mm/0.31inPackage includes:54T MOD 1 Hardened Steel Spur Gear

Made from medium carbon steel, stronger and great durability to achieve smooth driving performance.Use together with Tamiya Part# 22049, differential housing, connecting cup, and small bevel gear to achieve more stable power distribution.Package includes...

Made from medium carbon steel, stronger and great durability to achieve smooth driving performance.Directly replace the original stock gear.Package includes : M0.6 module spur gear 70T - 1pc.Original stock part number : 51694.Suitable model : Tamiya 1/10...

.

46-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for...

50-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for...

FEATURESFor use with the Axial AX31181 2-Speed Hi/Lo Transmission ConversionKitHeat treated hardened steel machined constructionNumber of teeth stamped on gear for easy identificationINCLUDES28 Tooth 48 Pitch GearSPECIFICATIONSNumber of Teeth: 28Gear...

FEATURES Hardened steel construction for long life Blackened finish for less friction resulting in better mating surfaces and smoother running gears INCLUDES Robinson Racing 62T Spur Gear for the...

Hot Racing optional 45 tooth, 0 .6 Module hardened steel spur gear for multiple 1/18 Dromida vehicles. See list below for vehicle compatibility.FEATURES:- CNC hardened steel constructionYOU WILL RECEIVE:- One (1) 45 tooth 0.6 Module hardened steel spur...

In The Box(1) Spur GearSpur Gear, Delrin, 59T MOD 0.5: NASCAR GROMApplicationGROMPart TypeGearsTooth Count59T

FEATURES Machined hardened steel with a blackened finish that improves lubricity and anti-galling (metal failure from friction) Accepts telemetry   INCLUDES ...

This 50-tooth (32-pitch) spur gear fits the optional 6780 center differential. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions...

ISD10 Replacement Driveshafts PartsPackage Includes:Male and Female driveshafts for varying length assembliesJoint sleeves for axle and transmission locations

FEATURES Machined hardened steel with a blackened finish that improves lubricity and anti-galling (metal failure from friction) Accepts telemetry   INCLUDES ...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Upgrade your Traxxas Slash 2WD / LCG / Drag Slash with the NHX RC Hardened Steel Spur Gear. Engineered for maximum durability and performance, It is crafted from high-quality hardened steel to withstand the rigors of high-speed racing and intense bashing...

Heavy duty 48 pitch spur gears for the Xray X1/X12 gear diffs. Provides more durability than the stock 64 pitch gears, especially needed in open wheel F1 and out door race settings.Made in England from black acetal (delrin) with each being cnc machined...

Heavy duty 48 pitch spur gears for the Xray X1/X12 gear diffs. Provides more durability than the stock 64 pitch gears, especially needed in open wheel F1 and out door race settings.Made in England from black acetal (delrin) with each being cnc machined...

Heavy duty 48 pitch spur gears for the Xray X1/X12 gear diffs. Provides more durability than the stock 64 pitch gears, especially needed in open wheel F1 and out door race settings.Made in England from black acetal (delrin) with each being cnc machined...

Heavy duty 48 pitch spur gears for the Xray X1/X12 gear diffs. Provides more durability than the stock 64 pitch gears, especially needed in open wheel F1 and out door race settings.Made in England from black acetal (delrin) with each being cnc machined...

Extra lightweight alloy spur gear mount for the HPI RS4 Sport 3. All alloy construction weighs only 2.6gr- the stock steel mount is 8.4gr! Less rotating mass means longer run times, a cooler motor and faster power delivery.Accepts the stock spur gear or...

48mm diameterHigh performance 4mm thick machined POM spur gears for all Exotek slipper eliminator hubs.Our spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much...

54mm diameterHigh performance 4mm thick machined POM spur gears for all Exotek slipper eliminator hubs.Our spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much...

56.5mm diameterHigh performance 4mm thick machined POM spur gears for all Exotek slipper eliminator hubs.Our spur gears are 100% machined POM to insure true roundness, with extra interior machining to reduce overall weight for reduced rotating mass. Much...

Key FeaturesFits : 1/10 VehiclesGear Material: AluminumGear Pitch : 48PTeeth Count: 80TPackage includes:1x 80T 48P Spur gear

Key FeaturesFits : 1/10 VehiclesGear Material: AluminumGear Pitch : 48PTeeth Count: 85TPackage includes:1x 85T 48P Spur gear

Key FeaturesFits : 1/10 VehiclesGear Material: AluminumGear Pitch : 48PTeeth Count: 92TPackage includes:1x 92T 48P Spur gear

This is a pack of Replacement 86T Spur Gear for Pro-Line’s Performance Transmission.  Includes: 86T Spur Gear (1 piece)  

Mount your spur evenly with this aluminum Spur Gear Support Plate! The aluminum piece creates an even distributed load which allows for a precise and quiet drivetrain. Feature:For: Mounting Spur GearMaterial: AluminumColor: BlackInclude:Aluminum...

Robinson's Super Machined Spurs are half the thickness of standard spurs, for less friction and a lower rotating mass, and that means better acceleration and top speed!

Robinson's Super Machined Spurs are half the thickness of standard spurs, for less friction and a lower rotating mass, and that means better acceleration and top speed!

 IRC00412 VFD Slipper Pads

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.