RC Lights RCL106MB 6 LED System For Rpm Canisters (3mm, 4/24)

Key Features

Overview

This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL106MB to add 4 3mm white LED lights to either RPM Front Bumper Canisters or RPM Narrow Roof Canisters and 2 3mm red LED lights to RPM Tail Light Canisters with dual-intensity brake light action built right into the included microBRAKE™ - 6 LED controller.

Includes the microBRAKE™ 6 LED Controller with built-in brake light action!  Compatible with RPM Light Canister Set RPM80982 & RPM80983 --Direct fit for Slash 4x4, Slash & SC10 RPM Front Bumpers.  Compatible with RPM Narrow Roof-Mounted Light Bar Set RPM80782 & RPM80783.

Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash & SC10.  Power directly from the RX or optional battery source.  To change headlight or tail light colors use 5mm or 3mm LEDs.  5mm version available; RCL5006.

Everything needed for a complete installation is included with every lighting system!

*NOTE: microBRAKE™ 6 LED Controller is not compatible with the Remote Power Switch (RCL5090).

Includes:
Instruction Set -
(1) microBRAKE™ 6 LED controller      RCL5052
(1) RX Pass-Thru™ w/ 3P power plug   RCL5074 
(4) 4" wire extensions                        RCL53904 
(2) 24" wire extensions                      RCL539024
(4) 3mm white headlights                   RCL5280W 
(2) 3mm red tail lights                       RCL5280R
(6) 2P connector housings - 
(1) 3.75"x3" aluminum tape               RCL5080
(6) zip ties & bases                           RCL5080

Specs:
SYSTEM CURRENT DRAW (@6V): 90mA with brake lights dim; 120mA with all LEDs fully bright
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
DIMENSIONS: 1.3" x 0.6" x 0.3"

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

*Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.

*DO NOT look directly into beam.