RC Lights Deluxbrake 14 LED Lights System for RPM Canisters, 3mm, 14" : Slash/SC10

Key Features

• Brightest LEDs Industry Wide
• Adjustable Headlight Strobe
• Dual Intensity Brake Light Action
• Multi-Mode Auxiliary Switching
• Simple & Easy Installation
• Power Directly From The RX
• All Mounting Hardware Included
• Fast Body Removal
• Lifetime Warranty on Every LED

  Overview

  This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!
  
  Use RCL114 to add 10 3mm white LED lights to RPM Front Bumper Canisters or RPM Narrow Roof Canisters and RPM Roof Canisters, and 2 3mm red LED lights to RPM Tail Light Canisters. Optionally add 1 3mm blue & 1 3mm amber LED lights to rear bumper of body. No extra channels, with included DELUXBRAKE - 14 LED controller. This controller has headlight strobe, adjustable intensity fog lights, auxiliary switching, and EBS (electronic brake switch) functionality built right in for a streamlined installation with dual-intensity brake light action, just like a real car.
  
  Power directly from the RX.
  
  Light canister set and roof-mounted light bar set sold separately.
  
  Everything needed for a complete installation is included with every lighting system!
  
  Included Items:
  Instruction Set
  (1) DELUXBRAKE 14 LED controller
  (1) RX Pass-Thru
  (1) 2-Channel RX Plug
  (14) 14" wire extensions
  (10) 3mm white headlights
  (1) 3mm blue strobe lights
  (1) 3mm amber brake lights
  (2) 3mm red brake lights
  (14) chrome 3mm LED holders
  (14) 2P connector housings
  (1) 1.25"x0.5" aluminum tape x18
  (1) 3.75"x3" aluminum tape
  (16) zip ties & bases
  
  Specs:
  SYSTEM CURRENT DRAW (@6V): 160mA with brake lights dim, auxiliary lights ON; 220mA with brake lights engaged (190mA w/o installing blue/amber lights)
  (A standard servo draws approx. 350mA)
  
  LED Controller
  INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
  TYP OUTPUT CURRENT (per LED channel): 20-30mA
  DIMENSIONS: 1.65" x 1.0" x 0.25"
  
  Blue, Green, White, White Strobe, Red Strobe LEDs
  FORWARD VOLTAGE: 3.2V
  MAX CURRENT: 30mA
  
  Amber, Red LEDs
  FORWARD VOLTAGE: 1.9V
  MAX CURRENT: 30mA
  
  *Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
  
  *DO NOT look directly into beam.