Savox SA-1230SG PLUS Coreless Steel Gear Digital Servo w/Soft Start SSR Mode

SAVÖX SA-1230TG+

New + version with softstart, Sanwa SSR Mode
Powerful digital servo, ideal for wing models, robust steel gearbox with low backlash
Dimensions (L/W/H): 40.3 x 20.2 x 44.9 mm Weight: 79 grams
0,20/0,16 sec/60 degrees u. 300/360 Ncm at 4,8/6,0 Volt
Drive frequency up to 333Hz, center pulse 1520us
The SA-1230TG+ is an extremely powerful servo of the standard size which is very well suited for use in wing models. Of course it can also be used in RC cars. The application as swashplate servos for scale helicopters up to 700 class is another option.

Please note, due to the larger motor the SA-1230TG+ is 5mm deeper than normal standard servos!

The new + version of the well-known SA-1230TG+ servo is visually and technically minimally different from its predecessor. A softstart which moves the servo slowly to the start position when switched on and the Sanwa SSR mode distinguish the + version.

The SA-1230TG+ servo is specially designed for use in wing models. The A in SA stands for Aircraft. Gearbox and software are optimized for this application, the low backlash titanium gearbox is extremely robust and reliable. The software has also been adapted, the holding force around the zero position is optimized here. Suitably reinforced servo arms in the scope of delivery are specially designed for fixed-wing models.

Actuating time S2/60° (sec): 0,16
Actuating time S1/60° (sec): 0,20
Width (mm): 20,2
Actuating force S1 (kg*cm): 30
Actuating force S2 (kg*cm): 36
Voltage range: 4,8V-6V
Length (mm): 40,3
Height (mm): 44,9
Weight (g): 79
Drive frequency: Up to 333Hz, 1520us center pulse
High voltage capability up to 8.4V: No
Voltage 1 (volts): 4,8
Recommended use: Helicopter, Airplane, Car, Boat
Ball bearing (quantity): 2
Voltage 2 (Volt): 6,0
Motor type: Bell armature motor
Housing type: Part metal
Output teeth (number): 25
Gear type: Steel
Classification: Standard