TCS 1006 M1 2-Function Hard-Wire Small Decoder for N Scale & HO Scale

The M1 is a small form factor hard-wire decoder with 2 lighting functions for HO-scale and N-scale installations. This decoder is designed for installations where space is limited.

 

This decoder is also available with 8-pin NMRA plugs or Keep Alive® wires factory-installed. See the "Variants" page for more options.

 

Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
 

Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
 

DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
 

RailCom®: This feature allows the decoder to talk to the command station. RailCom supports expansion for new features.
 

Variable Momentum: Allows you to make custom acceleration and deceleration curves.
 

Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
 

Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
 

Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
 

Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
 

Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
 

Airwire™ Compatible: Fully compatible with Airwire™ operation.
 

User-Loadable Speed Tables: Configure custom speed curves and set speed limits.

SPECS:

Interface Type: Hard-Wire
 

Dimensions (L x W x H): 0.587" x 0.365" x 0.135" or 14.91mm x 9.27mm x 3.43mm
 

Scale: HO Scale N Scale
 

Continuous/Peak: 1.0/2.0 Amp
 

Total Functions: 2
 

Function Rating: 100 mA
 

12V Outputs: 2