TCS 1013 MC2 2-Function Decoder w/ 7-Pin JST Harness for N Scale & HO Scale

The MC2 is a 2-function HO and N scale hard-wire decoder with a 7 pin JST socket. The MC2 is designed for use in locomotives where a T-series or M-Series decoder is too large. This decoder may be hard-wired, but is also available with 8-pin NMRA plugs installed. See the "Variants" page for more options.

 

Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
 

Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
 

DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
 

Variable Momentum: Allows you to make custom acceleration and deceleration curves.
 

Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
 

Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
 

Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
 

Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
 

Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
 

Airwire™ Compatible: Fully compatible with Airwire™ operation.
 

User-Loadable Speed Tables: Configure custom speed curves and set speed limits.

SPECS:

Interface Type: Hard-Wire / Direct-Plug (7-Pin JST)
 

Dimensions (L x W x H): 0.709" x 0.419" x 0.191" or 18.02mm x 10.63mm x 4.85mm
 

Scale: HO Scale N Scale
 

Continuous/Peak: 1.0/2.0 Amp
 

Total Functions: 2
 

Function Rating: 100 mA
 

12V Outputs: 2