TCS
TCS 1465 KAT24 4-Function Hardwire Decoder for HO Scale Locomotives
- SKU:
- TCS1465
- UPC:
- 879508004335
- Condition:
- New
Description
This decoder is a T4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but features the same operational characteristics. This decoder is compatible with any locomotive which uses the JST-9 interface.
Keep-Alive®: Included on-board for smooth, stutter-free operation.
Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
Variable Momentum: Allows you to make custom acceleration and deceleration curves.
Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
Airwire™ Compatible: Fully compatible with Airwire™ operation.
User-Loadable Speed Tables: Configure custom speed curves and set speed limits.
SPECS:
Interface Type: Hard-Wire
Direct-Plug (9-Pin JST)
Dimensions (L x W x H): 1.315" x 0.65" x 0.35" or 33.4mm x 16.5mm x 8.9mm
Scale: HO Scale
Continuous/Peak: 1.0/2.0 Amp
Total Functions: 4
Function Rating: 100 mA
12V Outputs: 4