TCS
TCS 2004 KA3-P Keep-Alive Device to Supply Power to Decoder HO Scale
- SKU:
- TCS2004
- UPC:
- 879508007831
- Condition:
- New
Description
TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.
Newly-redesigned and coming in at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor).
This Keep-Alive® includes a 2-Pin Quick Connector Harness for plugging into decoders with a compatible socket. , such as the T4.
Keep Alive® Decoder Compatibility With TCS Decoders
TCS Keep Alive® (KA) devices are designed to operate with all TCS (or any other Keep Alive® ready) decoders. Decoders with a corresponding socket can be used with the KA3-P. This will be detailed in the decoder literature if the decoder has the socket.
!!!WARNING!!! Decoders with a “-KAC” suffix have a non-polarized 2-Pin Connector for attaching the KA(x)-C. The KA3-P is NOT compatible with this style of plug-in Keep Alive® interface.
Keep Alive® Decoder Compatibility With Non-TCS Decoders
If you would like to attach a Keep Alive® unit to a non-TCS decoder, you need to connect the wires across the output of the bridge rectifier on the decoder. You will need to consult your decoder manufacturer for a schematic or wiring diagram.
Installation Notes for TCS Decoders
1. Refer to your decoder litarature for compatibility information with the polarized 2-pin plug interface.
2. Plug the Keep Alive® wires into the socket decoder (The plug interface is polarized and designed to only be plugged together one way).
3. That’s it! Your locomotive is ready to run over the most treacherous of tracks.
Dimensions: 1.02” x .45” x .347” or 25.9mm x 11.43mm x 8.81mm
Scale: HO Scale
Input Rating: 12 to 16V