Tichy Train Group

THIS IS A STANDARD HAYES MANUFACTURING CO. CAR BUMPING POST. IT WAS FIRST MADE IN 1926 AND CONTINUES IN USE TO THIS DAY. IT IS THE MOST COMMON TRACK STOP AND IS USED ALMOST EVERYWHERE.THIS KIT IS...

TELLTALES WERE USED TO WARN BRAKEMAN AND OTHERS ON TOP OF CARS OF APPROACHING LOW CLEARANCE CONDITIONS. THEY CONSISTED OF A SET OF ROPES OR CHAINS HANGING FROM A CROSSBAR PLACED SOME DISTANCE BEFORE...

THIS BOX CONTAINS 1 WATER COLUMN, 1 JIB CRANE, 1 OIL COLUMN, 3 OUTHOUSES, 3 COAL BINS, 8 CRATES AND 36 PALLETS.

THESE ARE PRR STYLE CATENARY INSULATORS MOLDED IN GRAY STYRENE. THEY ARE CORED FOR .025 OR SMALLER WIRE. SECTIONS CAN EASILY BE CUT OFF FOR SHORTER INSULATORS.24 PCS.

THIS IS A SCALE MODEL OF AN EARLY STREET LAMP. THE POST AND CAP ARE MOLDED IN BLACK STYRENE AND THE LENS IS MOLDED IN CRYSTAL STYRENE.8 PCS

THESE ARE A MODEL OF RR TIE RETAINING WALLS. EACH PIECE MEASURES 3/4" x 3-1/4". THEY ARE INJECTION MOLDED IN GRAY STYRENE.6 PCS.

THIS IS A STANDARD JIB CRANE. THEY WERE USED FOR MOVING HEAVY LOADS AT STATION PLATFORMS AND IN YARDS AND MANY INDUSTRIAL LOCATIONS. A TYPICAL USE WOULD TO LIFT A TRUCK SO A WHEELSET COULD BE CHANGED...

THIS IS A STANDARD SHEFFIELD WATER COLUMN. THEY WERE USED FOR FILLING STEAM LOCOMOTIVE TENDERS WITH WATER AND COULD BE FOUND AT MOST STATIONS AND OTHER STOPPING POINTS. IT IS INJECTION MOLDED IN GRAY...

THESE ARE A CONCRETE EQUIPMENT SHED COMMONLY USED TO HOUSE THE HOIST ENGINE AT A COALING TOWER AND A CONCRETE DRYING HOUSE WHICH WAS USED TO HOUSE A STEAM GENERATOR TO SUPPLY HOT STEAM TO DRY SAND...

THIS IS A SMALL STEEL INDUSTRIAL WATER TANK. THE ORIGINAL WAS BUILT IN 1904 BY CHICAGO BRIDGE AND IRON FOR THE TEXTILE MILL AT GLENCOE VILLAGE IN NORTH CAROLINA AND IS STILL STANDING. AS A RESULT, WE...

THIS KIT CONTAINS 1 HANCAR SHED (7011) AND 1 MILK STATION (7017). ALSO INCLUDED ARE 80 MILK CANS.

MILK WAS AN IMPORTANT SORCE OF REVENUE FOR RAILROADS IN THE FIRST HALF OF THE CENTURY, PARTICULARLY IN THE NORTHEAST. FARMERS WOULD PLACE THEIR MILK IN 10 GALLON CANS AND BRING IT TO THE NEAREST RR...

THIS KIT EXTENDS THE ICE PLATFORM KITS (7014 & 7015) BY SIX INCHES OR 1 40' CAR LENGTH.

THIS IS A MODEL OF THE "STANDARD" PFE ICING PLATFORM OR DOCK AS USED FROM THE LATE 1800'S TO THE EARLY 1970'S. ALL COMPONENTS ARE PRECISION MOLDED FROM GRAY STYRENE FOR EASE OF ASSEMBLY. THIS KIT...

THIS IS A MODEL OF A GENERIC STEEL TANK FOR EITHR WATER OR OIL. IT IS 4" IN DIAMETER AND 7" TALL.THE KIT IS INJECTION MOLDED IN GRAY STYRENE AND INCLUDES THE FOLLOWING:1 PC RINGSCIRCULAR...

THIS KIT REPRESENTS THE STANDARD STEEL WATER TANK THAT WAS DEVELOPED BY CHICAGO BRIDGE AND IRON FOR THE RAILROAD INDUSTRY. INSTALLATIONS WERE DONE FROM THE LATE 18 HUNDREDS TO THE END OF STEAM WITH...

THIS IS SIX 4021 KITS BULK PACKED IN ONE BOX.LOAD NOT INCLUDED.

THIS IS SIX 4020 KITS BULK PACKED IN ONE BOX.

4042D Pulpwood Flatcar Kit Single Car w/ Decals HO Scale

THIS IS A 40' PULPWOOD FLAT WITH CENTER SLOPING DECK AND END BULKHEADS.ERA 1940'S TO 1980'SINJECTION MOLDED STYRENE KIT.