Decoders and Accessories

Keeps locos running during power interruptions caused by dirty or bad track. Keeps light and other functions from dropping out due to power interruptions. Hold up time varies based on decoder load & track conditions. Use with...

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and P-HarnessMedium Plug with approximately.3.2" wires1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Fits many 8-pin Medium Socket DCC-Ready HO locomotivesDigitrax 9-Pin Socket and PS-HarnessMedium Plug with approximately.1.2" wires1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion™ System makes them run like the real thing, too!             Torque Compensation for smooth as silk...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker enclosure with this speaker for maximum sound output.

N scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used as a basic N scale signal...

Fits Many N/HO Locomotives with 8 pin Medium Socket    Size: .55” x .404” x .2”    13.9mm x 10.3mm x 5 mm    N/HO Scale    Digitrax Easy Connect 8 Pin Harness    1.0 Amp/1.5 Amps...

Fits Many Z, N and HO Scale Locomotives    Size: .455” x .369” x .126”    11.56mm x 9.37mm x 3.2mm    Z/N/HO Scale    1.0 Amp/1.5 Amps Peak    2 FX3 Functions, 0.5 Amp...

3-Pack of NCE Light-It programmable DCC lighting and signal decoders with built-in white LED. The Light-It is a multi-purpose programmable DCC lighting decoder. One Light-It contains three programmable lighting outputs with a complete array of lighting...

This decoder is specifically designed as a replacement for "Bachmann DCC Equipped" diesels. Providing a more smooth, more quiet operation.The decoder has 4 function outputs. Complete with 2 Golden Glow LEDs in the package

Control one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels.

Wired Motor & Function Decoder that fits many N and HO Scale Locos.    Size: .55” x .404” x .2”    13.9mm x 10.3mm x 5 mm    N/HO Scale    1.0 Amp/1.5 Amps Peak    3 FX3...

NCE HO scale universal decoder with 3.5-inch hard-wire harness. 4 functions and 15 different lighting effects. Instructions included. This smaller-sized decoder replaces the D13SR. This decoder is designed for HO scale locomotives not DCC Ready (not...

Fits many HO locomotivesDigitrax 9-Pin Harness Socket1.0 Amp/2 Amps Peak2 FX7 Functions, 200ma Output

Features:Digitrax LocoMotion® SystemYour locomotives look like the real thing. The Digitrax LocoMotion® System makes them run like the real thing, too!    Torque Compensation for smooth as silk silent operation.    128 Speed...

TF4 Quad DCC Function Decoder with Integrated TransponderFour 125mA (250mA peak) function output for lights or other functionsFunctions can be turned on/off using F0-F12Supports both 2 digit and 4 digit addressingProgrammable from DCC compatible...

Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)

Lets you run locos as DC or DCCFor DC only operation use the dummy plug with either DNWH or DNWHPSFor DCC operation remove the DNDP and replace with a decoder5-Pack

Your TL1 can be used as:1. Function only DCC decoder with transponding2. Digitrax Transponder3. Function only DCC decoder without transponding.Single 125mA (250mA peak) function output for lights or other functionsFunction can be turned on/off using F0,...

Decoder Wire for decoder, lighting & signal installation 90ft 30AWG stranded wire-10 ft lengths in 9 colors

Add a coiled cord to your LocoNet Throttle without soldering! Just plug the modular adapter provided on to your existing Throttle plug and add the coiled cord.   Specifications For Use With All Digitrax Throttles

DS51K1 Stationary Decoder For Single Kato Unitrack Turnouts, easy cost effective way to add DCC control to your Kato Unitrack Turnouts. DS51K1 Features: Stationary Decoder For Single Kato Unitrack Turnouts or other similar deviceEasy to useEasy...

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.

Lets you share decoders among locomotives4” wires make it easy to install in N or HO5-Pack

Input interconnect board for DS74.Provides plug and play connectivity for DS74 inputs.Supplied with ribbon cable to plug into DS74 10 pin Input header.Allows plug-in of up to 4 DSXCP1 fascia controls.Direct ribbon cable plug-in header to BD4N detectors.8...

2 pack of 8 foot LocoNet Cables. Convenient pre-made, pre-tested cables, ready to use on your layout. LocoNet Wiring is a snap with these cables. Specifications For Use With All LocoNet Layouts

Fits many HO, O & G Scale installations. Also fits in N Scale box cars. 26.5mm x 15.5mm x 9mm. 8 Ohm, 1/2 watt ratings. Acoustically matched enclosure included for best sound level. For use with decoders that specify 8 Ohm speakers...

Digitrax 9 pin to DCC medium plug long harness (3”)

Digitrax 9 pin to DCC medium plug short harness (1”)