Decoders and Accessories

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and improved automatic braking and shuttle abilities, simple-to-use ONE step locomotive set-up and advanced...

Zen Blue+ Decoder: NEM651 6-Pin Direct & Harness. 2 FunctionZen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE step locomotive set-up and advanced brown-out...

Fits many HO locomotivesDigitrax 9-Pin Harness Socket1.0 Amp/2 Amps Peak8 FX7 Functions, 300ma Output

Fits E24 socket locomotivesN-Scale Mobile Decoder13 FX3 Functions, 200mA capacityMotor drive at connector capacity

Fits Many DCC-Ready N and HO Scale LocomotivesSize: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mmN Scale1.0 Amp/1.5 Amps PeakFX3 Function outputs for prototypical lighting effects and on/off control:Constant Brightness Lighting with directional or...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. The KA3-C will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending...

HO-scale, 4-function decoder that measures 25 x 16 x 6mm with a 9-pin JST to 8-pin NMRA wiring harness that can be used in many DCC-ready models that have an NMRA 8-pin socket. This decoder will operate in both DC and DCC.Dimensions: 25 x 16 x 6mmMax...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in at half the size of a KA3, the KA1 will power HO or N scale...

TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with...

The T4-LED has added Blue and Black/White wires for the use of a KeepAlive device. The T4-LED is a multi-purpose HO-scale decoder. This decoder may be hard-wired or plugged directly into any locomotive with a 9-pin JST plug. The on-board resistors on...

Z/N-scale, 2-function decoder that measures 13 x 9 x 3mm with an attached wire harness, or ‘squid cable,' for easy installation in some Z and most N-scale models. This decoder will operate in DCC only.Dimensions: 13 x 9 x 3mmMax. Motor Stall Current:...

Features:    Board replacement decoder for Atlas MP15 units    Golden-White LEDs for added realism    Decoder Lock equipped Don’t settle for a decoder without the latest features in your locomotive!Upgrade...