Speakers / Electronics / Wires

Everything you need to get started with Advanced Digitrax Command Control.Evolution Express is perfect for most home and club layouts wanting Duplex Radio control out of the box.It offers excellent speed control, prototypical consisting, the full range...

The DT602 Advanced super throttle gives you direct control of two locos at a time with all the powerful features and flexibility serious model railroaders demand.Available in standard tethered or Radio Duplex.   The DT602 is designed to handle...

DB210-OPTO Single 3/5/8 Amp AutoReversing DCC Booster that is Opto-Isolated for layouts with common rail wiringSingle 3/5/8 Amp AutoReversing DCC Booster (no command station capability)Up to 8 Amps of power totalOpto-Isolated for layouts with common rail...

Works with compatible LocoNet SystemsCompact size for easy one-handed operationColor 1.5” LCD Display ScreenFull numeric keys for easy locomotive selectionFine speed control with encoder knobForward/Reverse toggle switch with brakingOn/Off Switch, uses...

UR93 Features:Digitrax Duplex Radio Transceiver on LocoNet wire infrastructure (no IR support).More than double the radio range of UR92 Duplex units.Improved multi-path performance for cluttered layouts.Plug and Play setup, PS14 Universal power supply...

Works with compatible LocoNet SystemsCompact size for easy one-handed operationColor 1.5” LCD Display ScreenFull numeric keys for easy locomotive selectionFine speed control with encoder knobForward/Reverse toggle switch with brakingOn/Off Switch, uses...

The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes automatically without having to press any buttons. The PR4 is electrically...

The LNWI allows you to connect compatible WiFi devices to LocoNet and run trains using compatible throttle apps. The apps available can be downloaded from this page.Wi-Fi interface to a Digitrax LocoNet for up to four compatible mobile Wi-Fi devices and...

Simplifies hookup, maintenance and troubleshooting of LocoNet.All connections plug-detachable.One RJ12 Throttle Jacks in front panel.IR and NET Indicator LEDsTwo RJ12 LocoNet Jacks in rear for connection to other LocoNet devices.Use with 6 conductor...

MS100 RS232 Computer Interface for connecting LocoNet to your IBM compatible PC.The MS100 Computer Interface is designed to let a computer with an IBM compatible COM, or RS232 communications port, monitor Digitrax LocoNet.Application software running in...

The RX4 is a 4 zone transponder detector for use with Digitrax occupancy detection systems.  The RX4 enables you to not only see what blocks are occupied but also identifies what is there.RX4 Features:Know the layout zone location of...

For use with Digitrax Decoders Equipped with 6 pin Function Harness8 ohm 10x18 mm Oval speaker included.Keeps locos running during intermittent power interruptions resulting from dirty or bad track.0.33 F CapacitanceUse on 10-18V Track PowerHold up time...

LocoNet Layout Wiring Made Simple!Pre-made, pre-tested 50 foot LocoNet cable.Use on any LocoNet Layout.Use for long runs or divide into custom lengths using LocoNet Cable Maker Kit & RJ12 Plugs.SpecificationsFor Use WithAll Digitrax Layouts

HO scale Turnout Signaling Kit including: 1 Dual Head A Signal, 1 Single Head B Signal, 1 Single Head C Signal, 3 SMP1s, 6 spacers, 6 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used as a basic HO scale signal...

N scale Mainline Signaling Kit including:2 Single Head A Signals, 2 Single Head B Signals, 4 SMP1s, 8 spacers, 8 screws.Makes all of your signals plug ‘n play with small 10 pin connectors.Can be used as a basic N scale signal.Mounting board and hardware...

Materials for making 2 Signal Driver Cables for SE8C. Includes 30’of 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that...

2 pack of 16' LocoNet Cables.Convenient pre-made, pre-tested cables, ready to use on your layout.LocoNet Wiring is a snap with these cables. SpecificationsFor Use WithAll LocoNet Layouts

10 Pack Warm White T1 LEDsMake your locomotive lights sparkle!  Use these beautiful warm white LEDs to replace the harsh blue white LEDs that are sometimes shipped with locomotives.  Simply replace the LEDs inside your locomotives with these.

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the...

Digitrax 9 pin to bare wire harnesses in 5 packs

9G mini servo system for turnout or motion control.Under layout mounting bracket included.Compact install for tight N scale switches, and decks.Includes pre-formed drive wires.Supplied with mount hardware.

Fascia mount Switch control device.Wire to DS74 input cable, or use DSXC4 for plug and play.Two color leds display current Switch state.Supplied with 3 wire control cable.

2 LT5 Tester ModulesFor use with BDL16 Series Boards, BD4N, and other products

2 LT5C Tester Modules.For use with BDL716, BDL16 Series Boards, BD4N, and other products.

Ready to install in compatible locomotive motherboards26.5mm X 15.5mm X 9mmRated at 8 OhmRated at 1/2 Watt

Pluggable Terminal BlocksReplacement for lost or damaged Pluggable Terminal BlocksFor use with products using Pluggable Terminal BlocksIncludes:(1) 2 pin 3.5 mm Pluggable Terminal Block(1) 3 pin 3.5 mm Pluggable Terminal Block(1) 4 pin 3.5 mm Pluggable...

3 Pack Edge Connector for use with PM4 Series Boards, BDL16 Series Boards and SE8 Series BoardsThis is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item or sell directly to end users.SpecificationsFor...

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.32 Ohm, 1/2 watt rating.Acoustically matched enclosure included for best sound level.For use with decoders that specify 32 Ohm speakers.SpecificationsSpeaker32 Ohms, 1/2 watt

Fits many HO, O & G Scale installations.53mm x 18mm x 14mm.8 Ohms, 1/2 watt ratings.Acoustically matched enclosure included for best sound level.For use with decoders that specify 8 Ohm speakers.SpecificationsSpeaker8 Ohms, 1/2 watt

Use for joining LocoNet Cables, adding coiled cords to throttles, etc.SpecificationsFor Use WithDigitrax Layouts and Throttles

Use with crimper tool to make custom length LocoNet cables & replace broken plugs.SpecificationsFor Use WithDigitrax Layouts and Throttles

RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy gauge wire between the BDL168, BDL16 & BDL162 and remotely located track sections.SpecificationsFor Use...

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals.

Oval 10mm x 18mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations.   Used on current production SDN144A0, SDN144A1 & SDN144PS sound decoders.  Digitrax recommends use of a baffle or speaker surround to maximize sound...

Round 13mm 8 Ohm Speaker with wires. Fits many N & HO Scale installations. Used on current production SDN144K0A and SDN144K1E sound decoders.Digitrax recommends the use of a baffle or speaker enclosure for maximum sound output when using this...

SP282832 - Round 28mm 32 Ohm Speaker with wires. Great for HO installations.Used on current production SFX004, SFX064D, SDH164D & SDH164K1A sound decoders.Digitrax recommends the use of a baffle or speaker enclosure to maximize sound output when...

SP28288 - Round 28mm 8 Ohm Speaker with wires. Great for HO installations. Used on current production SFX0416 sound and function decoder.Digitrax recommends the use of a baffle or speaker enclosure with this speaker for maximum sound output.

Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and BoostersThis item is a replacement part that can be ordered through your dealer.  Digitrax does not repair this item or sell it directly to end users.Warranty...

Lets you share decoders among locomotives2” wires from Digitrax plug to DCC 8 pin plugFits many HO locomotives with 8 pin socket