Speakers / Electronics / Wires

Command Station Only. No track Power Booster.FYI: Not for use with the Power CabContents included with CS03:One 2-pin plug for the programming trackOne 7 foot 4 wire Control Bus cableOne P118 Power supplySystem reference manual that can be found

D13W Decoder - New Smaller Replacement for D13SRDimensions: 1.03 x 0.630 x .185 inches – 26 x 16.5 x 4.7 mmSilent Running Torque Compensated Motor DriveTorque Compensation for Ultra Smooth Low Speed PerformanceMotor Rating 3/4 Amp Continuous, 1.2 Amp...

The Cab06 uses a more conventional knob for speed control and is available with either a potentiometer (Cab06p) or digital encoder (Cab06). Both varieties of the Cab06 can be set to YARD mode. Yard mode makes the speed knob act as a "center off" speed...

Intermediate standard cab with potentiometer speed control.LED DISPLAYThis 4 digit display normally indicates the current locomotive address and its forward/reverse status.SPEED KNOBThis knob controls the speed of the locomotive. It turns a digital...

Complete set to expand or upgrade a layout, optimal wiring for five amp and lower power systems, and connections can be easily disconnected for trouble-shooting.  Includes Main Bus (50' each red and black 14 AWG stranded wire), Feeder Wires (16...

The Auxiliary Input Unit provides connection of block occupancy detectors, switch position relays, etc. for purposes of signaling and/or computer control of your layout.Simply plugs in to the Cab Bus.

.

Available with an eight pin plug in. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

.

Available with a wire harness. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

 Add Push Buttons or Toggle switches to a Switch8 Mark2For Use w/Switch8-MK2 Switch Machine Decoder #524-151

Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60.

Available with a wire harness. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0.4" x 0.12".

N Scale Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9

The NCE Switch-It is a two-address decoder specifically designed to drive stall motor switch machines. It therefore does not have some of the features that the other decoders have.  It is the easiest to install:Connect two wires to the trackConnect...

Plug and play decoder for N-Scale Atlas H15-44 and H16-44Features of this decoder: Preprogrammed marker lights change color depending on direction Silent Running, torque compensated motor drive Torque Compensation for ultra smooth low...

N12-NEM Plug In 4 Function Decoder With 6 Pin NEM 651 Connector

AND-24 Anderson Power Poles 24 Pack 12 each Red / Black

NCE NHI-MED Medium Size "No Halt" Add On ModuleHigh Power Version for Larger LocomotivesEliminates or Reduces the Following Due to Dirty Track or Unwired Switchfrogs:• Stalling• Sound interruption• Light flicker

The front two sockets connect to our RJ12  modular Cab cables while the rear two sockets connect to CAT5 cables.Faceplate Dimensions: 3" x 2" 

.

.

The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a complete array of lighting effects. Suitable for signal heads, passenger cars, locomotive lighting,...

NCE Euro12-2 - 12 Circuit Eurostyle Term Strip - Package of 2. (14-24 AWG)

FeaturesUse with any DCC system to prevent large voltage spikes.Reduces or eliminates voltage spikes on long runs of DCC bus wireProtects decoders from damaging inductive voltage spikesSolve temporary loss of control or runaway problemsPreserves DCC...

NCE TBTB32 Blue Track Bus Taps, 14-16 Gauge, 32pk 

The UTP-CAT5 Adapter lets you change from our RJ12 plug to the CAT5 plug so that you can use the existing Cab Bus cable you already have!

.

TS6S On/On SPST Toggle Switch 6-Pack -125V - 5A

Ultraflex Wire 30 Gauge 10ft Red

RJ/12-7,   6 Wire straight cab bus cable, 7 foot long

Ultraflex Wire 32 Gauge 10ft White

Ultraflex Wire 32 Gauge 10ft Yellow

Ultraflex Wire 32 Gauge 10ft Green

Ultraflex Wire 32 Gauge 10ft Blue

Ultraflex Wire 32 Gauge 10ft Gray

NCE TBTB20 Blue Track Bus Taps, 14-16 Gauge, 20pk 

.

.

.

.