GPM Brass Pendulum Whl Knuckle Axle Weight +23mm Hex Adapter : TRX-4 / TRX-6

Brass Pendulum Wheel Knuckle Axle Weight + 23mm Hex Adapter - 12Pcs Set

This part is designed with a bearing in the middle with a delrin collar, the weight pendulum is made narrower on the top and wider at the bottom to allow you to crawl in different angles. The additional weight is kept downward so the crawler is more grabby to the ground and able to crawl in a larger angle. especially when the car is digging into some low lying area landspaces, it grabs the ground firmly and smoothly drives back to level.

Install on the outer drive portal to keep the gravity of the chassis stays heavy and low. Weight of single pendulum + Hex : 133 grams. Widen hex of 21mm included (16mm wider than the original).

This product is ONLY suitable for wheels with 5mm thread hole and minimum 45mm inner diameter.

Included : 23mm Hex Adapter-2pcs ; M4x2.5x11 Screw Pin-2pcs ; 5mm Spring Steel Shims-2pcs ; 5mm Metal Washer-2pcs ; 19mm Stainless Steel Hex Socket Screws-2pcs.

Will fit : 1/10 Traxxas TRX-4 Defender Trail Crawler (82056-4), TRX-6 Mercedes-Benz G63 AMG 6X6 Crawler (88096-4)