Vanquish VPH22004 Titanium Hardware Kit for VFD Transmission

Titanium Hardware Kit – Vanquish Products VFD Transmission*
This kit includes replacement screws for assembling the VFD Transmission* using lightweight, high-strength titanium. Titanium offers an excellent strength-to-weight ratio and corrosion resistance—ideal for performance-focused builds.

Designed specifically for the VRD Carbon Spec VFD Transmission.
Note: This kit does not include all of the required M2x6mm cap head screws for the scale transmission tunnel shroud.
Installation: Follow the instructions below to avoid damage to components or hardware.

Package Contains:

• X4 M2x6mm Caphead
• X3 M3x6mm Buttonhead
• X4 M3x8mm Caphead
• X2 M3x6mm Caphead
• X12 M3x12mm Caphead
• X1 M3x16mm Caphead
• X1 M3x30mm Caphead
• X2 M3x12mm Caphead
• X1 M4 Nylock Nut

Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.

• When installing into plastic:
  • Do not use lubricant.
  • Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
  • Avoid using impact drivers.
• When installing into metal or threaded inserts:
  • Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124 
  • Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
  • Torque values should be reduced by 20–30% compared to steel fasteners.
  • Ensure threads are clean and lubricated before installation.
  • Avoid dry fitting and use hand tools for final torque.

Failure to follow these guidelines may result in damaged threads or seized fasteners.