RPM 80562 Rear True Track A-Arm Conversion Black Revo

FEATURES: Eliminates stock rear toe links, locking in the rear toe angle at 1.5° per side for a total rear toe-in angle of 3° Eliminates all rear bump steer for better rear end tracking regardless of terrain Replaces lower pivot ball with a 4mm diameter hinge pin for constant rear toe angle Retains stock upper pivot ball to allow camber adjustments Weighs a total of 1-1/8oz (32g) less than stock components

INCLUDES: Two each Upper and Lower Rear A-Arms

Two Axle Carriers

Two 4mm Hinge Pins

Four E-Clips

Two 3x16mm Shock Mount Screws

Two Aluminum Pivot Ball Set Screws

Two Delrin Pivot Ball Bushing Cups

Two 6x15mm Sealed Outer Bearings

Two 12x21mm Sealed Inner Bearings

Instruction sheet

Tech Notes: These rear end kits work on all versions of the Traxxas Revo, including the e-Revo and e-Revo brushless but depending upon the version, may shorten the wheelbase of the truck. One kit will complete the entire rear end of any Revo. These kits will not work in conjunction with Traxxas (#5356) 120-LT Long Travel Rockers. Due to the wide lower A-arm hinge pin configuration, some aftermarket wheels - in particular, 3.2" beadlock wheels, may not work with RPM True-Track kits. Check with the manufacturer of your aftermarket wheels before installing this kit.