RPM

The RPM Front Bumper for the ARRMA Kraton 6S has been updated to work with all current versions. It fits anything from the V5 and EXB editions as well as older models. The differential clearance area...

Description RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first being durability. We designed...

RPM Rear A-arms for 6S V5 / EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam & Outcast are an all new design. The design modifications accommodate changes made by ARRMA for V5 and...

uick Notes:– stock replacement a-arms for V5 / EXB models (see “Version Notes” below)– extra shock mount hole for added suspension versatility– fits most 6S version models (see “Version Notes”...

uick Notes:– stock replacement a-arms for V5 / EXB models (see “Version Notes” below)– extra shock mount hole for added suspension versatility– fits most 6S version models (see “Version Notes”...

Product Description Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been missing a key link in the chain of RPM durability – the bulkheads. We’ve heard numerous...

Product Description Until now, the Traxxas T-Maxx and E-Maxx line of trucks has been missing a key link in the chain of RPM durability – the bulkheads. We’ve heard numerous...

DescriptionYou’ve heard of twin turbos, but have you heard of mirror turbos? If not, you’re in for a treat! Mirror turbos take the lack of symmetry out of twin turbo set-ups by utilizing one...

FEATURES Nylon constructionBlack in colorVery durable   INCLUDES Two Heavy Duty Rear A-Arms   REQUIREMENTS Installation on the...

Product Description RPM designed this enclosed pinion case to hold each pinion on its own post. There is no need to tighten the setscrew to hold the pinions in place. Included is a peel-off...

Description RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5...

FEATURES Engineering grade nylon construction Replaces the Traxxas #5833, #5833A & #5833G nerf bars Designed specifically for the low center of gravity (LCG) Slash chassis Extra cross...

Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our...

Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our...

Product Description Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off to the world that your car is...

Quick Notes: – for use with 4-40 (3mm) turnbuckle threads and .169″ (4.3mm) ball studs Product Description When it comes to rod ends, RPM rod ends are the basis for...

Product Description RPM has combined the most popular genre of R/C – Monster Trucks – with one of the most popular RPM products ever released – the #70992...

Description Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels...

Description Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels...

Product Description The chassis layouts of the 1/10th scale Rally & Slash 4×4 changed the original design of the stock nerf bars, making our currently available #80622 & #80625 nerf...

Product Description The chassis layouts of the 1/10th scale Rally & Slash 4×4 changed the original design of the stock nerf bars, making our currently available #80622 & #80625 nerf...

Quick Notes: – an RPM Slash 2wd or Slash 4×4 Rear Bumepr is required for installation (will not work with stock or other aftermarket rear bumpers) – tires must be 2...

If you’re looking to improve the strength & durability of your Rustler 4×4 or Hoss 4×4 Front Shock Tower, look no further than RPM. Our Front Shock Towers are based on our Slash 4×4 shock tower...

FEATURES: Constructed of molded black plastic with pre-drilled mounting holes. High-impact design absorbs bumps without breaking. INCLUDES: One front bumper One skid plate Mounting hardware

FEATURES: Hardened plastic construction Prevents vehicle from flipping over backwards during hard acceleration INCLUDES: Wheelie Bar Assembly with Mounting Hardware and Instructions

FEATURES: Constructed of hardened plastic, black in color Flexes to resist breakage INCLUDES: Wide Front Bumper in Black

FEATURES: Composite construction, black in color Rugged durability and slop free movement INCLUDES: Two Upper Arms Left and Right Lower A Arm Two Axle Carriers Two 4mm Hinge Pins Four E-Clips...

This is the optional Rear Bumper Mount from RPM for use on the Traxxas Slash, Rustler, Stampede, and Bandit. FEATURES: Nylon constructionBlack in color INCLUDES: One Mount for a Rear Bumper or...

FEATURES: Nylon construction Green in color INCLUDES: One Front Upper A-Arm One Front Lower A-Arm Two 3x12.5mm socket head screws Instruction sheet

FEATURES: Composite plastic, black in color Protects the sides of the chassis from side impacts, roll overs and T-bone crashes INCLUDES: Two RPM Nerf Bars  

FEATURES: Nylon construction Black in color INCLUDES: One Rear  Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet

FEATURES: Constructed of plastic, black in color.Connects linkage rods to suspension components INCLUDES: Twelve Long Rod Ends in black

FEATURES: Constructed of hardened plastic, black in color INCLUDES: One RPM Tubular Front Bumper for the Traxxas Revo SPECS: Thickness: 0.31" (8mm) Width: 5.8" (148mm) Height: 1.8" (45mm) at...

FEATURES: Constructed of molded blue plastic with pre-drilled mounting holes. High-impact design absorbs bumps without breaking. INCLUDES: One Optional Mini Bumper for the Associated T4 and B4 models

FEATURES: Constructed of composite nylon Angled leading and trailing edges eliminate dirt build-up Fits left or right side INCLUDES: Two RPM White Rear A-Arms for the Traxxas Revo with 16mm screw for...

FEATURES: Durable Black nylon construction. Countersunk screw design INCLUDES: One front/rear shock tower Two body mounts One front cross member One rear cross member Four 4-40x1/2" socket head...

FEATURES: Nylon construction blue in color INCLUDES: One Front Bumper One Skid Plate One Skid Plate Mount Seven 4x14mm Flathead Screws Three 3x14mm Buttonhead Screws Instruction sheet  

FEATURES: 0.12" (3mm) thick 6061 T6 aluminum motor plate offers strength to lock in gear mesh, and better heat dissipation than stock plastic motor plate Motor plate is separate from rear bumper...

FEATURES: Molded in neon Yellow plastic. INCLUDES: Twelve 4-40 Size Heavy Duty Rod Ends from RPM.

FEATURES: Strong nylon construction Black in color INCLUDES: One Front bulkhead brace One Rear bulkhead brace Eight 3 x 15mm hex head cap screws

The RPM Stampede 2WD Rear Bumper combines awesome scale looks with performance that works! This rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still...

Chicane Alum. Finish Sedan Wheels fits HPI, Tamiya, Kysho, Associated & Traxxas. (Standard Width) Details, details, details, that’s what we thought of when we designed the Chicane wheel...

Our solution to a better-designed front bumper on the Losi Rock Rey involved more than just a simple skid plate revamp. We moved the entire skid plate from between the chassis plate and differential...

If you’re encountering steering arm breakage with your stock Super Rock Rey’s spindle set, or if you’re looking for a strong, aftermarket replacement option, RPM has the alternative you’ve been...

Quick Notes: – replacement Spline Drive Adapters for use with RPM Wheels only - contains 3 pairs of adapters in 3 thicknesses Product Description This replacement set of 6 Spline...

Quick Notes:– lighter than stock by 4.5 grams per upper / lower a-arm pair– replaces the front right upper A-arm from stock ARRMA #ARA330561– replaces the front right lower A-arm from stock ARRMA...

Quick Notes:– designed specifically for the Kyosho Fazer Mk2– sold in pairs– may work with other sedans running 26mm wheels– wheel offset is +4.7mm (standard for Kyosho Fazer Mk2 models)– recommend...

Quick Notes:– also fits the Durango DEX8T– roughly 10% lighter than stock– less slop for more accurate suspension settings– replaces stock ARRMA #AR330218 & #AR330219– replaces stock Durango...

Quick Notes:– three-piece design for easier maintenance– upper compression zone for improved impact resistance– skid rib for better abrasion resistance– larger front radius for smoother transitions...

Quick Notes:– also fits the Durango DEX8T– roughly 10% lighter than stock– less slop for more accurate suspension settings– optional Mud Guards also available– replaces stock ARRMA #AR330249–...

Quick Notes:– for use with RPM #81282 Trailing Arms only– reversible for longer service life– over 3/16” (5mm) thick with three skid ribs built inRPM Trailing Arm Skid Plates protect RPM Trailing...

Quick Notes:– fits the Telluride & ST versions of the Rally– Does not fit the Slash 4×4, Stampede 4×4, Rustler 4×4 or Rally 4×4– each a-arm is 1.5 grams lighter than stock– 2 packages needed to...

Similar to our original Losi Baja Rey Front Bumper (RPM #73742), our newest iteration of the Baja Rey Front Bumper is designed to work with the Ford Raptor body from Losi. We’ve incorporated all of...

Quick Notes:– works with or without a Wheelie Bar (not included)– compatible with Traxxas or RPM Rear Bumper Mounts (not included)– available in Black, Green, Blue or Pink– not compatible with the...

Quick Notes:– works with or without a Wheelie Bar (not included)– compatible with Traxxas or RPM Rear Bumper Mounts (not included)– available in Black, Green, Blue or Pink– not compatible with the...

Quick Notes:– works with or without a Wheelie Bar (not included)– compatible with Traxxas or RPM Rear Bumper Mounts (not included)– available in Black, Green, Blue or Pink– not compatible with the...

Quick Notes:– provides a solid, positive mount to keep your new and valuable ESC in place– allows the ESC to be run with or without a fan– air channels along the sides of the ESC allow air movement...

If you’re looking to improve the strength & durability of your Rustler 4×4 or Hoss 4×4 Rear Shock Tower, look no further than RPM. Our Rear Shock Towers are based on our Slash 4×4 shock tower...

FEATURES: Constructed of black plastic INCLUDES: Four Shaft Guards and four Ball Ends with Instruction Sheet

DescriptionThe ARRMA Kraton 8S & Outcast 8S are 26 lbs. (12kg.) of high-flying, dirt shredding, jump-killing fun! If your A-arms aren’t up to the abuse these massive monsters can dish out, look...

RPM Oversized Front Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of these massive beasts. The first issue being durability. We designed these carriers...

DescriptionImmediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive trucks can...

Description Immediately after Traxxas released the X-Maxx, RPM customers started notifying us that they needed stronger A-arms that could handle the weight and the punishment these massive...

This is a pair of optional RPM Upper and Lower A-Arms in Greenfor the Traxxas X-Maxx.FEATURESMolded from engineering grade nylon, green in colorStronger and lighter than stock A-ArmsReplaces the...

This is a pair of Revolver 2.2 - 3.0" Front Wheels for the 1/10 scale 2WD Traxxas Slash. FEATURES Heavy duty spline drive eliminates wear and...

Product Description Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! Our Revolvers for 1/10th scale trucks are scaled up versions of our...

Description The RPM Rear Bumper Mount is a beefy alternative to the small beam supports offered with stock parts. Our replacement is built more like a massive skid plate with tons of durability...

Description This is a set of replacement bearings for RPM #81732 Oversized Axle Carriers for the Traxxas X-Maxx. These bearings are not replacement bearings for stock Traxxas Axle...

Description We asked our fans on Facebook what they’d like to see from RPM and one of the most popular requests was Wing Mounts for the ARRMA / Durango 1/8th scale line. You asked for it,...

While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per side less than stock, for a...

RPM A-arms for the 4×4 3S BLX versions of the Granite, Senton & Big Rock are the answer to the questions you didn’t know you had. Are you looking for more adjustability? Check! How about better...

Description RPM A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed primary for strength and durability but we’ve added a few extra features in as...

.

Description RPM is synonymous with strength and durability, plus we’re known for taking the extra steps to design unique parts worthy of your favorite ride. That’s why we’re...

Description The RPM Front Bumper Mount for the Traxxas X-Maxx is a stout, ultra strong alternative to the small beam supports offered with the stock lower mount. Our version replaces those small...

DescriptionHave you upgraded your stock ESC to Castle’s awesome Sidewinder 4 but don’t trust double-sided tape or zip ties to “securely” attach it to the chassis? RPM has you covered! Our...

FEATURES Plastic ConstructionDecimal Scale in Inches   INCLUDES One GaugeOne Instruction SheetOne Decal   REQUIREMENTS On Road or Off Road...

FEATURES Designed for the electric Rustler and Stampede that include stock molded camber links Nylon blend construction, red in color INCLUDES ...

Quick Notes:Extra screw location strengthens entire rear end of the truckStock rear bumper / wheelie bar mounts (Traxxas #3677) will not work with RPM skid plates – must use RPM Bumper / Wheelie Bar...

Quick Notes: - fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Product Description Give your favorite Traxxas vehicle added protection with...

Product Description RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with our front bulkheads (RPM #81062 or #81065) are available to further improve the durability of these awesome...

DescriptionRPM A-arms for the Typhon 4×4 3S BLX are everything you’re looking for in a set of replacement A-arms. Our versions are more adjustable, more durable and lighter than stock.Adjustability:...

RPM Front A-arms for the Typhon 4×4 3S BLX are everything you’re looking for in a set of replacement A-arms. Our versions are more adjustable, more durable and lighter than stock.Adjustability: We’ve...

Description RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash, electric Rustler & electric Stampede 2wd are the final link for a complete, bulletproof front suspension from RPM for...

Description RPM A-arms for the Traxxas Slash 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We...

FEATURES Nylon constructionBlue in colorVery durable   INCLUDES Two Heavy Duty Rear A-Arms   REQUIREMENTS Installation on the...

Quick Notes:– works with new or damaged bodies– disguised for improved visual appeal– work with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodiesThe clipless body mounting system Traxxas...

This is the optional RPM Gear Cover for the Traxxas Electric Powered Rustler, Stampede, and Bandit.     FEATURES Expanded gear cover...

Quick Notes: - RPM long rod ends replace Traxxas stock #5525 – requires stock Traxxas pivot balls FEATURES For use with all...

DescriptionRocks, dirt and debris striking your shock shafts lead to dents, dings and burrs, which, in turn, lead to torn shock seals. Torn shock seals means leaky shocks and poor shock performance...

Rocks, dirt and debris striking your shock shafts lead to dents, dings and burrs, which, in turn, lead to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock...

DescriptionRPM engineers examined a brand new E-Revo 2.0 body and were shocked when they discovered cracks around the body mount holes in the body. This vehicle had never been run and the holes were...

Description Identical in strength and performance as our #80375 Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from...

Description RPM front A-arms for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd are built to withstand some of the toughest abuse. Incredibly, we were able to shave some...

FEATURES: Plastic construction Black in color INCLUDES: One front bumper Two 3x13.5mm Button head cap screws SPECS: Length: 103mm (4.06") Width: 16mm (0.63") Thickness: 6.5mm (0.26")

Quick Notes: – lighter than stock A-arms – reduced slop for better performance Product Description RPM engineers reviewed common breakage areas of stock DESC410R A-arms and...

This is the RPM Upper and Lower Front A-Arms for the Losi Baja Rey.**NOT compatible with the Losi Super Baja Rey.**FEATURESRedesigned upper A-arm shape eliminates bind, and adds extraclearance at the...

Description Our ESC Cage for the Castle Mamba X ESC provides a solid, positive mount to keep your new, and valuable ESC in place even under the most extreme circumstances. It also allows the ESC...

These are the 0 and 3 Rear Mounts for the RPM Hybrid Gearbox Housings.FEATURESFor use with the RPM 73612, 73614 and 73615 gearbox housings-will not work with Traxxas or any other aftermarket...

Quick Notes: – replaces stock Traxxas #7430 – two-piece design for ease of front-end maintenance – incorporated side dirt shields Product Description Designed from the ground...