RPM

FEATURES: Adds realism to your Traxxas Slash Nylon construction INCLUDES: One Tail Light Set: Two Red Tail Light Lenses Two Mounting Plates Two Tail Light Housings Two 3x10mm Buttonhead...

FEATURES: Nylon construction Green in color INCLUDES: One Rear Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet

FEATURES: Constructed of black nylon, these are rings that snap together through the body post holes in Lexan bodies Will help protect the body from tearing or damage around these holes Package...

FEATURES Black 10-hole pattern designReinforced for strength and minimal weightMade of a nylon materialUses 12mm hex & max axle size = 6mm   INCLUDES Two 10-hole narrow wheelbase...

Quick Notes: – works with Castle Sidewinder ESCs #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00 – fits the Traxxas Slash 2wd, Slash 2wd...

FEATURES: Nylon construction Green in color Fits XL-5 and VXL Versions Maximum Spur Gear (87 Tooth) INCLUDES: One Green Sealed Gear Cover SPECS: Length: 79mm (3.11") Width: 60mm (2.36") Height:...

Description RPM Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed...

Quick Notes: – extreme accuracy down to 0.25mm – range from 4mm to 29.5mm Product Description The RPM Ride Height Gauge take the guesswork out of proper ride height...

Product Description RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with our front bulkheads (RPM #81062 or #81065) are available to further improve the durability of these awesome...

  Quick Notes: – fits all versions of the Traxxas T-Maxx & E-Maxx – fits in either the front or rear shock tower locations Product Description When strength becomes an issue...

This is the RPM Front Bumper and Skid Plate for the Losi Rock Rey.       FEATURES Replaces the stock Losi #321009 front bumper...

Product Description The RPM ESC Cage is designed to simplify ESC installation and maintenance of the E-Maxx, E-Revo and Summit, as well as adding versatility by allowing quick removal of the ESC...

Quick Notes: – replaces stock Traxxas #7430 – two-piece design for ease of front-end maintenance – incorporated side dirt shields Product Description Designed from the ground...

The RPM Stampede 2WD Rear Bumper combines awesome scale looks with performance that works! This rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still...

Description This kit is an easy and inexpensive option for bolting camber links (not included) and tie rods (not included) to your electric Rustler XL-5 or electric Stampede 2wd XL-5 when...

Product Description If you’re anything like we are, keeping track of which offset wheel you have lying around for your Traxxas Slash 2wd or Nitro Slash and whether or not the wheel / tire has...

This a pair of optional RPM Extended Right Rear A-Arms in Blue for the 1/10 scale Traxxas Summit, Revo and E-Revo. FEATURES Composite plastic...

Quick Notes: - fits the Traxxas Summit, Revo & E-Revo Product Description In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our...

Measures aprox. 2 1/4 x 3 1/4 x 3/8 deep. Includes a magnet that will holdsmall parts like e-clips, small pins, etc. where you can get a hold of them.It's made of a chemical resistant injection...

FEATURES: Rubber construction Black in color INCLUDES: Two Mud Flaps Two Support Arms Two Screw Supports Four 3x10mm Buttonhead Screws Four 3x16mm Buttonhead Screws Instruction Sheet

FEATURES: Nylon construction Black in color May be modified to fit other applications INCLUDES: One MountingPlate Four Clear Lenses Four Light Canisters Four Light Guards Four M3x8mm Flathead...

FEATURES: Fits all versions of the Traxxas Revo Constructed of custom blended nylon, black in color Wider than stock mounts, allowing more room to flex INCLUDES: Front Bumper Mount in Black for the...

FEATURES: Heavy Duty Nylon Construction Blue in Color Two Pre-Drilled Shock Mounting Positions For the Front of the Nitro Rustler INCLUDES: Two Front Black A-Arms Two 3mm x 18mm Machine Thread Socket...

FEATURES: Black nylon construction INCLUDES: Two rear bearing (hub) carriers Two RPM decals SPECS: Height: 40mm (1.58") Width at widest point: 15.4mm (0.61")

FEATURES: Constructed of composite nylon Angled leading and trailing edges eliminate dirt build-up Fits left or right side INCLUDES: Two RPM White Rear A-Arms for the Traxxas Revo with 16mm screw for...

FEATURES: Heavy Duty Nylon Construction Green in Color Pre-Drilled Shock Mounting Positions For the Rear of the Electric Rustler and Electric Stampede INCLUDES: Two Rear Green A-Arms One RPM Decal...

FEATURES: Plastic construction INCLUDES: Two Caster Blocks and two Steering Blocks

.

FEATURES: Constructed of plastic composite construction, blue in color Replaces Traxxas part #5347,Used to connect linkages INCLUDES: Twelve RPM Short Rod Ends

FEATURES: Nylon construction Black in color Can be used on front or rear INCLUDES: Two body posts One body mount bracket One thin spacer One thick spacer Two M3x16mm button head screws ...

FEATURES: Eliminates stock rear toe links, locking in the rear toe angle at 1.5° per side for a total rear toe-in angle of 3° Eliminates all rear bump steer for better rear end tracking...

FEATURES: Composite construction, black in color Designed to be more rigid than stock, yet will give slightly under extreme situations to prevent or reduce damage to more fragile components Designed...

Product Description Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off to the world that your car is...

Description RPM rear A-arms for the Traxxas Slash are designed specifically for the Slash 2wd – they are not multi-platform A-arms like the stock versions. Our first design challenge was...

Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our...

Description The RPM Torment 4×4 Rear Bumper is a very unique design that dramatically improves strength, durability and scale looks over any other bumper options available. Our bumper is...

Quick Notes: – works with Castle Sidewinder ESCs #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00 – fits the Traxxas Slash 2wd, Slash 2wd...

Description The RPM ESC Cage for Traxxas XL-5 & XL-10 ESCs is the most effective, durable and best protection possible for your speed control. We eliminated the use of the two...

Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our...

Description RPM’s heavy-duty camber links will completely eliminate broken camber links on your Rustler or Stampede 2wd! We guarantee it! These camber links are virtually indestructible so...

Quick Notes: - fits the Traxxas Summit, Revo & E-Revo Product Description In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our...

Description The Dromida Vista and Ominus quadracopters are fantastic performers straight out of the box. But if you’re a beginner, they need some protection – either for the motor...

Description The RPM Rear Skid Plate for the ECX Circuit 4×4 and Torment 4×4 (see “Tech Notes” below) adds protection to the chassis where the stock version does not. We...

Quick Notes: – fits the original RC10 & RC10 Classic using RPM arms Quick Links: – use with RPM RC10 Classic Rear A-arms Product Description The...

Description Are you looking to add some serious stability to your electric Rustler or Stampede 2wd? Look no further! RPM has a new set of wide front A-arms that will push your front wheels...

Quick Notes: - replaces stock Helion #HLNA0082 – sold in pairs Product Description Let’s face it; breaking parts sucks! That’s why you need RPM on your ride...

Description Are you tired of losing those pesky body clips? One flip and you’re almost guaranteed to lose at least one! Are you irritated that those ugly body posts sticking up through...

Description The Dromida Vista and Ominus quadracopters are fantastic performers straight out of the box. But if you’re a beginner, they need some protection – either for the motor...

Product Description RPM bumpers are not only the strongest bumpers made; they are extremely lightweight and have a scale, realistic appearance. Our front bumper adds extra protection with a...

Description Are you tired of losing those pesky body clips? One flip and you’re almost guaranteed to lose at least one! Are you irritated that those ugly body posts sticking up through...

Description The RPM ESC Cage for Traxxas XL-5 & XL-10 ESCs is the most effective, durable and best protection possible for your speed control. We eliminated the use of the two...

The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2WD vehicles is designed to solve a multitude of issues with stock and other aftermarket transmission housings. These gearbox housings and...

Description RPM Shock Hoops and Body Mounts for the Axial SCX10 are an affordable alternative to stock that improve durability and increase suspension options. Our versions incorporate stock...

Description You’re tired of breaking stock rear A-arms, right? It usually happens when you’re at your favorite bash spot and there isn’t a hobby store within 50 miles too...

Quick Notes: – extra screw location strengthens front end of the truck and prevents bellcranks from popping out – designed and guaranteed to fit a stock Traxxas Slash 2wd chassis and...

 These are the RPM Heavy Duty Caster Blocks for the 2WD ECX Torment, Ruckus, Circuit and Boost. **Fits 2WD Versions Only.** FEATURES ...

These are the optional RPM Heavy Duty Rear A-Arms in Red for the Electric Powered Traxxas 2WD Rustler and Stampede.     FEATURES Each...

Product Description Are you looking for a more durable, stronger alternative to your stock Helion Animus A-arms? Are you looking to eliminate some of the slop in the suspension system of your truck?...

Quick Notes: – extra screw location strengthens front end of the truck and prevents bellcranks from popping out – designed and guaranteed to fit a stock Traxxas Slash 2wd chassis and...

This is a pair of Revolver 2.2 - 3.0" Rear Wheels in Black for the Rear of the 1/10 scale 2WD Traxxas Slash, Front and Rear of the Slash 4x4, HPI Blitz, Ofna Jammin' SCRT and Ofna Hyper 10SC...

This is the optional RPM Wide Front Bumper for the Traxxas Rustler, Stampede, Nitro Sport and Bandit.     FEATURES Adds extra 1/2"...

Quick Notes: – for use with RPM SC10 & SC10.2 2wd rear bumpers only Product Description The RPM Mud Flaps and Number Plate kit is designed to add that element of...

These are RPM Custom Engineered R.C. Products Servo Mount Posts. FEATURES Precision molded black nylon construction that securely holds servos...

Quick Notes: - fits the SC10 2wd, T4, B4, GT2 and most older vehicles such as the T3, B3, T2, B2, RC10T and RC10 – not for use with Associated SC10 4×4 or MGT shocks or “Big...

This is the RPM Low Visibility Wheelie Bar for the Traxxas X-Maxx. **Must be used with the RPM #81762 Rear Bumper Mount** **Will not work with stock, or any other known aftermarket rear bumper...

Quick Notes: - fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Product Description Give your favorite Traxxas vehicle added protection with...

Quick Notes: - replace Traxxas stock #5333R Product Description We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you...

FEATURES: One Piece Molded Nylon Green in Color INCLUDES: Four Heavy Duty Camber Links  SPECS: Length: 3.55" (for the (2) longer links) Width: .320" (for the (2) longer links) Lenght: 3.062"...

Product Description One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after time that even the most experienced drivers...

Quick Notes: - replace Traxxas stock #5333R Product Description We have received numerous requests for a set of extended rear A-arms to fit the Traxxas Summit and Revo. When you...

This is a pair of optional RPM Upper and Lower A-Arms for the Traxxas X-Maxx. FEATURES Molded from engineering grade nylon Stronger and lighter than...

FEATURES: Nylon construction Red in color INCLUDES: One Front Upper A-Arm One Front Lower A-Arm Two 3x12.5mm socket head screws Instruction sheet

Quick Notes: – fits 2wd versions only – replaces stock rear axle carriers for both ECX #1090 and ECX #234000 – 5x11x4mm bearings not included Product...

This is the Revolver Black Rock Crawler Wheels Wide Wheelbase from RPM Products. FEATURES Black 10-hole pattern design Reinforced for strength...

uick Notes: – fits 2wd versions of the Torment, Ruckus & Circuit only Product Description With the successful release of RPM front A-arms for the ECX Torment 2wd, Ruckus 2wd...

FEATURES: Black plastic construction Heavy-duty design INCLUDES: One rear body mount set four 3x10mm flathead screws instructions and decals

  Quick Notes: – does not fit HPI “Big Bore” shocks Product Description What better way is there to add some style to your shocks than with a touch of RPM color?...

Product Description Details. They’re what set a custom ride apart from the common, everyday vehicle. Details are what get the attention focused on you and not your competitor. And details are...

Quick Notes: – minimum bearing inside diameter = 3/16” (5mm) – maximum bearing outside diameter = 1.25” (32mm) – works perfectly on the popular skate, skateboard and...

FEATURES: Constructed of molded composite material, blue in color Wall thickness around the pillow-balls has been increased by 40% eliminating split walls Over 20% more material supports the...

**Body modification is required to allow the Spare Tire Carrier** **to fit correctly.** FEATURES Nylon construction, black in color One...

FEATURES Plastic constructionBlack in color   INCLUDES Center Skid PlateRear Skid PlateFront Skid PlateFour 3x8mm Flat Socket Head ScrewsTen 3x10mm Flat Socket Head ScrewsInstruction...

Quick Notes: – fits most bodies with 3/16″ (5mm) body posts – maximum body thickness = .04″ (1.0mm) Product Description One of the weakest points on a Lexan body is where...

This is the optional RPM Landing Gear in White for the Dromida Vista, Vista FPV, Ominus and Ominus FPV Quadcopters.     FEATURES ...

FEATURES Engineering grade nylon construction Replaces the Traxxas #5833, #5833A & #5833G nerf bars Designed specifically for the low center of gravity (LCG) Slash chassis Extra cross...

Product Description RPM Rear Skid Plates for the Associated SC10 4×4 add an element of protection not present with stock components. The stock rear skid plate does not sit below the level...

FEATURES: Stainless steel construction Shielded to help keep the bearing clean and smooth running INCLUDES: Two 12x21x5mm bearings Two 6x15x5mm bearings

FEATURES: Blue in color Plastic construction INCLUDES: (1) Upper Arm (1) Lower Arm (2) RPM Decals SPECS: Length: 5" (127mm) Width: 3-1/8" (79mm) Thickness: 0.33" (8.4mm)

FEATURES: Blue in color Plastic constrution INCLUDES: Two Front/Rear A-Arms

FEATURES: Nylon construction Blue in color INCLUDES: One Rear Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet

FEATURES: Nylon construction Red in color INCLUDES: One Rear Upper A-Arm One Rear Lower A-Arm Two 2x13mm socket head screws Instruction sheet

FEATURES: Sturdy nylon reinforced plastic construction Uses all stock hardware (for mounting shocks etc.) INCLUDES: One rear shock tower SPECS: Width: 4.33" (110mm) Height: 2.75" (70mm) Thickness: 7mm

FEATURES: Constructed of hardened plastic INCLUDES: RPM Rear Shock Tower

FEATURES: One Piece Molded Nylon Black in Color INCLUDES: Four Heavy Duty Camber Links  SPECS: Length: 3.55" (for the (2) longer links) Width: .320" (for the (2) longer links) Lenght: 3.062"...

FEATURES Durable plastic constructionFits both nitro and electric versions of the Rustler and Stampede   INCLUDES One BumperOne Team RPM Decal

These are optional body mounts by RPM, Inc. the Traxxas T-Maxx/E-Maxx Trucks. These mount on the front and rear shock tower and support the body. FEATURES ...

FEATURES: Composite nylon construction, blue in color Direct fit hop-up requires no model modification for installation INCLUDES: Two Front A-Arms SPECS: Length: 3.31" (84mm) Width: .88" (22.5) at...

FEATURES: Plastic construction Black in color INCLUDES: One Front Shock Tower for the Traxxas E-Stampede, E-Rustler, Bandit and Nitro Stampede SPECS: Width: 3.26" (83mm) Height: 2.91" (74mm) ...

FEATURES: Composite plastic, blue in color Protects the sides of the chassis from side impacts, roll overs and T-bone crashes INCLUDES: Two RPM Nerf Bars  

FEATURES: Nylon construction Blue in color Fits XL-5 and VXL Versions Maximum Spur Gear (87 Tooth) INCLUDES: One Blue Sealed Gear Cover SPECS: Length: 79mm (3.11") Width: 60mm (2.36") Height: 35mm...