EXOTEK

REPLACEMENT FOAM EXOTEK BUMPER

New hyper soft 22x compound with newly designed carpet foam insert are suited for carpet racing. Not suited for asphalt due to possible over heating.Designed 100% from the ground up, and taking cues...

Heavy duty titanium front axle set for the Associated B7 series.At only 4.1 grams per pair these axles are stronger than the stock aluminum axles while still being lightweight.Rounded and angled hex...

Stealthy 2 color anodized heavy duty servo mount for the Associated B7 series.Heavy duty design that is machined to be lightweight at only 7gr each.Also designed with a 1mm wider opening for easier...

Stealthy 2 color anodized heavy duty 'D' arm mounts for the Associated B7 series.Updated design adds more support material on the back side for increased durability over the stock mounts.Customized...

Stealthy 2 color anodized heavy duty 'c' arm mounts for the Associated B7 series.Updated design removes the side notches that can break or bend on the stock mounts.Customized polished black base with...

NOTE- NOT FOR THE B7D (it has a smaller spring)Lightweight polished titanium slipper spring perch set for the Associated B7.Over half the weight of the stock steel perch at 1.2gr, this set lightens...

Stealthy 2 color anodized alloy steering crank set for the Associated B7 series and also the B6.4 series.Customized polished black base with blue chamfered accents goes great with your stock plastic...

Stealthy 2 color anodized alloy steering rack for the Associated B7 series and also the B6.4 series.Customized polished black base with blue chamfered accents goes great with your stock plastic parts...

Our performance hybrid ceramic bearings set for the Associated B7 kit series.These produce higher rpm and smoother spinning performance for increased speeds.Lightly oiled for less 'stiction' than...

3mmYou love the premium MIP hex tools but want the complete factory look and feel of machined alloy grips? This is the way- with Exotek machined billet 7075 Grip-Lock handles.Tactical style machined...

2.5mmYou love the premium MIP hex tools but want the complete factory look and feel of machined alloy grips? This is the way- with Exotek machined billet 7075 Grip-Lock handles.Tactical style...

1.5mmYou love the premium MIP hex tools but want the complete factory look and feel of machined alloy grips? This is the way- with Exotek machined billet 7075 Grip-Lock handles.Tactical style...

Also works on the B6.4-B6.2 laydown series.New super light alloy locked spur mount with titanium center bolt for our lightest spur locker yet. Excellent for stock buggy and oval racing.The mount and...

Hard anodized 7075 alloy 26T idler gear for the B7, B6.3, B6.2 etc layback and stand up gear boxes (replaces the stock 26t plastic idler gear).Must have for high powered or high grip racing...

Lightweight polished titanium top shaft screw for the Associated B7 series.About half the weight of the stock screw at 2gr, this titanium screw lightens your rotating mass and lowers your CG...

Heavy duty hardened steel complete CVD axle sets and diff cups for the front of the 1/10 Traxxas Rally and Fiesta.-Reduced parts count and all steel construction insures reliable racing without fear...

We have brought back our original clamping shock cups for Traxxas 1/10 ultra shocks that are included with Slash, Stampede, Hoss, Rally etc.No more bash or race sessions cut short due a little...

REPLACEMENT alloy wheel assembly includes 2 bearings and foam tire.

194mm 1/10 Hyper Endurance body and wing set for modern low profile touring cars.Hyper realistic 24 hour endurance body that replicates the modern European LMH hypercar class.Complete with an extra...

Factory racing style carbon fiber shock tower for the Slash 4x4, LCG 4X4 and Stampede 4x4. Extra heavy duty 4mm thick glossy carbon fiber. Includes special alloy shock posts and body mount posts and...

Factory racing style carbon fiber shock tower for the Slash 4x4, LCG 4X4 and Stampede 4x4. Extra heavy duty 4mm thick glossy carbon fiber. Includes special alloy shock posts and body mount posts and...

For experienced hobbyists only. Read the important notes at the bottom.Other option parts shown not included.TX DRAG SLASH carbon fiber chassis conversion set.Lightweight 'street eliminator' drag...

Heavy duty steel top shaft replacement for the 2wd Slash based 272R Magnum gear box for use with DR10 slipper sets or Exotek MK #2012 #2015 slipper sets or Exotek #1942 slipper eliminator.1 piece...

Full racing specs such as alloy threaded body and collars, machined shaft guides and machined delrin pistons for velvety smooth shock performance.'X' ring style silicone O-ring provides excellent oil...

Heavy duty V2 rounded joints with hardened steel complete CVD axle sets and diff cups for the rear of the SLASH 4x4 or SLASH 2wd (NOT Drag Slash, Rally, Bandit, etc).-Reduced parts count and all...

New V2 MEDIUM RED 38X (38 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire.New redesigned foam inserts for improved fit...

New V2 FIRM Yellow 40X (40 celsius) compound with a newly tooled mold that produces a more rounded tread for improved durability versus the v1 front tire.New redesigned foam inserts for improved fit...

Beautiful polished steel wrench tool, perfect for assembling and wrenching on Exotek kits and parts.5.5mm wrench on one end and 7mm on the other.

Beautiful polished steel wrench tool, perfect for assembling and wrenching on Exotek kits and parts.4mm turnbuckle wrench on one end and 4.75mm opening ball cup popper on the other for Exotek ball...

Stealthy 2 color anodized alloy rear hub set for the Associated B74 line including .2 and .1.Heavy duty design maintains your suspension geometry settings, race after race.Customized polished black...

Extra lightweight 7075 alloy drive shaft for the HPI RS4 Sport 3. All alloy construction weighs only 12.5gr- the stock steel shaft is 35gr! Less rotating mass means longer run times, a cooler motor...

Racing grade USA made 3mm carbon fiber shock tower for the HPI RS4 Sport 3.Heavy duty and extra stiff for improved suspension action and consistency.Lightweight carbon gives your Sport3 that racing...

Racing grade USA made 3mm carbon fiber shock tower for the HPI RS4 Sport 3.Heavy duty and extra stiff for improved suspension action and consistency.Lightweight carbon gives your Sport3 that racing...

Heavy duty machined 7075 alloy steering hub set for the AE B74 series including .1 .2 and D.Great addition to you car that provides extra durability and precision.Polished and anodized black with a...

New version top cross brace for the Exotek CB6 CB6.4 Chassis conversion.Lowered to hold in LCG type shorty batteries and an additional front hole to allow the servo to be mounted further back if...

Heavy duty 11gram 7075 alloy bulkhead for the RB10, PRO2 SC10 and DB10.Great looking and solid mounting of your front suspension. Includes set screws to hold the hinge pins.Use blue thread and do not...

Hard anodized 7075 alloy idler gear for the RB10, PRO2 SC10 and DB10.Must have for high powered applications.This is much stronger than the stock plastic idler gear but not indestructible so it is...

The 'bullet proof' rear motor gear box for the RB10, PRO2-SC10 and DB10. Heavy duty machined alloy gearbox that keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie...

For Traxxas 2wd Drag Slash based chassis.New version 2 hinged design of our popular single wheelie bar concepts.Extra long 13.5" from wheel axle to axle with 3mm thick carbon fiber wheelie bar that...

Heavy duty hardened steel complete CVD axle sets and diff cups for the front of the SLASH 4x4 and RALLY.-Reduced parts count and all steel construction insures reliable racing without fear of...

The 'bullet proof' piece for your high powered DR10M build. Heavy duty machined alloy gearbox that keeps your gears in perfect alignment, even under the heaviest motor rpm loads.New '3 Gear' option...

Heavy duty alloy rear ballstud mount for the Associated DR10M. Machined down to 6 grams to minimize weight but made with 7075 alloy to increase the strength over the stock piece.Laser etched,...

For the Associated B6.4 B6.3 B6.2 based chassis.New version 2 hinged design of our popular single wheelie bar concepts.Extra long 3mm thick carbon fiber wheelie bar that can extend to 14.5" long...

2.5mm thick carbon fiber spacers that raises the AE B6.1 - B6.4 series laydown/layback gearboxes up so that the dog bones angle sits straighter when at ride height and gives you extra room to install...

REQUIRES- B6.2 - B6.4 gear box parts including- B6 39t IDLER GEAR, #91799 TOP SHAFT, BEARINGS AND HARDWARES.High performance heavy duty laydown gear box with motor plate for AE B6.2-B6.4 drag racing...

USGT APPROVED!194mm 1/10 GT polycarbonate clear body and wing set.Exotek is excited to bring you the GTF, our 'retro' new contender for the highly competitive USGT / GT classes!A true classic...

Your big truck deserves our big upgrades!Heavy duty front c-hub set for your LST 3XL insures you drive more and wrench less and gives your LST a factory racing look.Precision machined aluminum that...

Extra lightweight alloy spur gear mount for the HPI RS4 Sport 3. All alloy construction weighs only 2.6gr- the stock steel mount is 8.4gr! Less rotating mass means longer run times, a cooler motor...

Special clamp on alloy fan mount for 24MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can...

Special clamp on alloy fan mount for 20MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can...

Special clamp on alloy fan mount for 20MM diameter 1/18-1/14 mini/micro motors. The included mounting bracket has multi-mount features that allows the fan to be angled or parallel with the motor can...

Threaded spool cup for the MTC2 stock spool.Instead of screwing the 2 stock outdrive cups to the plastic spool, which is known to come loose, this redesigned cup allows 1 long M3 screw to pass...

New soft RED compounds are suited for carpet racing and cooler asphalt racing weather.Designed 100% from the ground up, and taking cues from the new full size F1 wheel disk regulations, we have taken...

Sold as 1 pair of rubber tire with foam inserts- rear wheels not included and sold separatelyExotek is proud to release our first entry into the 1/10 F1 tire segment!Designed 100% from the ground up,...

Precision machined heavy duty alloy servo mounts for the Losi 22S series drag cars. Solid design that installs easily onto your chassis and provides for easier maintenance and consistent steering...

56.5mm diameterHigh performance 4mm thick machined POM spur gears for all Exotek slipper eliminator hubs.Our spur gears are 100% machined POM to insure true roundness, with extra interior machining...

54mm diameterHigh performance 4mm thick machined POM spur gears for all Exotek slipper eliminator hubs.Our spur gears are 100% machined POM to insure true roundness, with extra interior machining to...

48mm diameterHigh performance 4mm thick machined POM spur gears for all Exotek slipper eliminator hubs.Our spur gears are 100% machined POM to insure true roundness, with extra interior machining to...

Hard anodized 7075 alloy 38T idler gear for the complete Xray XB2 series of gear boxes.Must have for high powered racing applications.This is much stronger than the stock plastic idler gear but not...

Hard anodized 7075 alloy 26T idler gear for the B6.3 B6.2 etc layback and stand up gear boxes.Must have for high powered racing applications.This is much stronger than the stock plastic idler gear...

Wide stance rear drag racing shock tower for the B6.3 - B6.1 laydown and layback gear box.Uses the stock rear shock and allows for an upright angle for more stability.Made of glossy 4mm carbon fiber.

Stealthy 2 color anodized 7075 motor heatsink for the B6.3-B6.1 T6.1 SC6.1.Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue...

Precision machined premium titanium front axle set for the B6.3, B6.2 and B6.1 series.At only 4.5 grams per pair, these axles are lightweight but also stronger than the stock alloy pieces.Rounded and...

Super light titanium axle set for the Losi 22S drag car (NOT for the TLR 22 series). Reduces the weight and rotating mass of your driveline for quicker acceleration.Over 40% lighter than the stock...

Heavy duty, 7075 alloy constructed front bulkhead for the LOSI 22S Drag and SC.Machined to be heavy duty, weighs 16gr and retains the stock geometry of the kit plastic pivots.Customized polished...

100% cnc machined and vented motor plate. Aggressive slot cuts for less weight that also helps lower the motor temps faster. The slots also help cool down the inner slipper parts by letting cooler...

Also for the TLR 22 3.0 standup gearbox.Lightweight 3gr hard anodized alloy idler gear for the Loss 22S Drag. Reduces your rotating mass for more RPM's at launch.Direct replacement for the stock...

Heavy duty steel top shaft replacement for the DR10.Heavy duty constructions but still only 12gr ea.NOTE- you must use gear grease (tacky) to help protect the idler gear from wearing out.

Heavy duty 7075 machined alloy motor guard for the DR10. Provides extra rigid mounting of your wheelie bar for perfectly straight wheelies.Use with the stock DR10 bracket to help absorb high speed...

New turbine cooling drag slipper disks for the DR10 and TLR 22 (1.0-5.0) top shafts for quicker slipper cool downs before the next pass.Provides added slipper cooling via the extra heat sink fins...

Note- NOT for the 22S Drag car.Add protection to your TLR 22 (22 1.0-5.0 series) with our heavy duty alloy, carbon fiber and foam bumper set.Details include a heavy duty alloy and carbon fiber...

Optional heavy duty steel ball diff axle for the F1Ultra.1 piece shaft for maximum durability that also provides extra rear weight (shafts weighs 26gr) for more traction in low grip conditions.The...

V2 lighter, no gear cover mounting.100% cnc machined and vented motor plate. Aggressive slot cuts for less weight that also helps lower the motor temps faster. The slots also help cool down the inner...

Precision machined heavy duty alloy rear clamping hex set designed just for the DR10 and DB10.Looser steel cross pin tolerance allows you to tighten the wheel nuts without binding the bearings. The...

Heavy duty 1 piece alloy servo mount for the DR10.Makes for easier servo install and removal thanks to the 1 piece design that will always match the chassis holes.

NOT for the LOSI 22S.22 VADER drag chassis conversion set.Read the important notes at the bottom for required items needed.Lightweight 'street eliminator' drag chassis conversion set for use with TLR...

Heavy duty steering rack for the DR10, DB10, B5 based AE trucks and buggies.Precision machined, polished and anodized in team AE blue for that factory racing look.

Factory style heavy duty 7075 alloy center bulkhead set for the 8ight-XE.Also includes the carbon fiber top brace.The alloy construction maintains proper gear mesh for longer gear life and reduces...

High performance heavy duty gear box, motor plate with shock tower and alloy idler gear set for TLR 22 5.0-3.0 drag racing builds. All alloy gearbox construction keeps your gears in perfect alignment...

194mm 1/10 GT polycarbonate clear body and wing set.Exotek is excited to bring you the TYPE A, our 'retro' new contender for the highly competitive USGT / GT classes!A true classic style body we all...

TX VADER drag chassis conversion set.Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS.Converts your Slash to be cash race ready for the hot...

High performance machined POM (delrin) spur gears for triple or double disk slippers that uses Associated style octalock type spurs and slipper pads.Our spur gears are 100% machined POM to insure...

Stealthy 2 color anodized 7075 alloy rear ball stud mount for the B6.3-B6.1 T6.1 and SC6.1 series.Customized polished black base with blue chamfered accents goes great with your stock plastic parts...

For the Losi 22S street eliminator car.Heavy duty 4mm thick carbon fiber front tower, that weighs only 10 grams.Factory racing looks and a much more rigid construction than the stock plastic tower...

Lightweight polished titanium slipper bolt for the B6.3-B6.1 T6.1 and SC6.1 series.Almost half the weight of the stock bolt at 2.2gr, this titanium bolt lightens your rotating mass and lowers your CG...

Requires AE Octalock spur gears.New turbine cooling triple slipper disks for the DR10 and TLR 22 (1.0-5.0- not LOSI 22S) top shafts for quicker slipper cool downs before the next pass.Provides added...

High grade LCF pro style slipper pads for Octalock type Associated spur gears. Has a small 12mm inner diameter for more surface area for improved slipper efficiency.Can also be used on standard...

New black with blue chamfer finish.Time to upgrade that servo horn with the Exotek heavy duty 7075 alloy clamping servo horn! Perfect fit and geometry for robust steering and performance.Direct...

The 'bullet proof' piece for your high powered DR10 build. Heavy duty machined alloy gearbox that keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie bar pointed...

Converts our popular single wheel bars into a 2 wheel bar and maintains all of the adjustability of the original design.Includes the heavy duty carbon fiber 'Y' bar, 1 wheel and 1 wheel mount.For use...

Wide clamping heavy duty hex sets (8mm each) for TLR 22 based street eliminator cars.Allows easy mounting, without spacers, of ProLine and JConcepts street eliminator wheels.

For the 2wd Slash drag and oval body mounting.Heavy duty carbon fiber with alloy base body mount set (requires Traxxas body post set #TRA1914R).Extends the body mount back by 28mm and out of the rear...

12" FROM AXLE TO AXLE and legal for most no prep events.The wheelie bar requires a complete DR10 kit and uses the stock DR10 wheels and motor guard mount.Extra long, carbon fiber wheelie bar for the...

Stealthy 2 color anodized alloy  HD steering rack for the B74.Updated rack corrects the excess bump steer found in the stock steering rack. Our rack allows the inner ball link to be positioned...

Set of 4 heavy duty 7075 machined alloy clamping spring perch sets for the Hot Bodies 1/8 series of buggies and trucks.Rugged design for reliable spring holding that withstands those hard impacts and...

Alloy 40mm Fan Blaster shroud blasts your fans air directly onto your motor for maximum cooling effect while also acting as a finned heat sink that adds additional ambient cooling.Importantly, the...

New V2 mount with larger double screw mounting bar.Keep your 1/8 sized motors from fading or melting down in the heat by way of our special clamp on alloy fan mount for high powered 40mm and 30mm...

Precision machined 7075 alloy rear clamping hex set for the Tekno EB410 and ET410.This 7.5mm wide hex is +3mm (per hex) compared to the stock hex allowing you to tune the width of your buggy.7.5...

Stealthy 2 color anodized 7075 alloy rear ball stud mount for the B6.1 T6.1 SC6.1.Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market...