Futaba

16IZS Transmitter – 18-Channel Computer System2-Stick, 18-Channel, FASSTest 2.4 GHz System (01004423-1)(01004422-1)(01004420-1)(01004421-1)FEATURESFASSTEST SYSTEM:The Futaba 16IZS transmitter adopted...

4PM Plus Transmitter – Super Response Digital Proportional RC SystemFor Use with Surface Models (01004414-3) (01004416-3) (01004415-3) (01004418-3)FEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY...

10PX MINI-Z MODULE ADAPTER (UBT2333)USE: Allowing the use of the Mini-Z external transmitterLENGTH:180 mm11.8 inWEIGHT:3.6 g.12 oz Only compatible with T10PX

S-U301– Standard Digital and S.Bus2 Capable Airplane Servo with Accessory Pack (01102322-1)SPEED:0.18 sec/60°at 6.6V0.16 sec/60° at 7.4VTORQUE:3.5 kgf/cm at 6.6V48.6 ozf/in at 6.6V3.9 kgf/cm at 7...

R7208SB– FASSTest Bi-Directional Communication System S.Bus/S.Bus2 Port and 8 Channels for Conventional System ReceiverFor Aircraft Models (01102381-1)SIZE:24.9 mm x 47.3 mm x 14.3 mm0.98 in x 1.86...

S-U300– Standard Digital and S.Bus2 Capable Airplane Servo with Accessory Pack (01102320-1)SPEED:0.23 sec/60°at 4.8V0.19 sec/60° at 6.0VTORQUE:44.4 oz/in at 4.8V56.9 oz/in at 6.0VSIZE:1.6 in x 0.8 in...

Transmitter carrying boxFor Air Transmitters (UBB1220)FEATURES:– Durable hardshell gloss black finish.– Rubber handle with backbone for increased grip and rigidity.– Sized to fit in any overhead...

GYD470– Drift Car Counter Steer GyroRate Gyro for DRIFT RC Cars: Steering Use (01102373-3)FEATURES:– Dedicated RC drift car setting– Remote gain function and mode switching function– Integrated,...

WSC-1–  Wireless Simulator ControlThe WSC-1 allows for direct wireless communication with simulators and transmitters using the S-FHSS protocol.Compatible with the most popular simulators on...

This is the FT2F2100BV2 6.6V 2100mAh LiFe Transmitter Battery.FEATURESFor use with the Futaba 18SZ, 14SG, 10J, 6K, 6J, 4PV, 4PX/R, 4GRS,4PKS/SR and 4PL/LSINCLUDES6.6V 2100mAh LiFe Transmitter Battery...

This is the FT2F2100BV2 6.6V 2100mAh LiFe Transmitter Battery.FEATURESFor use with the Futaba 18SZ, 14SG, 10J, 6K, 6J, 4PV, 4PX/R, 4GRS,4PKS/SR and 4PL/LSINCLUDES6.6V 2100mAh LiFe Transmitter Battery...

GYC470– All-Purpose Car GyroRate Gyro for RC Cars: Steering Use (01102374-3)FEATURES:– Dedicated RC car setting– Remote gain function and mode switching function– Integrated, compact, and light...

CONTENTS:T4PM+ TransmitterR304SB-E Receiver - NEVER USE THE R304SB-E IN GP CARSDry Battery HolderMini ScrewdriverFEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS...

CONTENTS:T4PM+ TransmitterDry Battery HolderMini ScrewdriverFEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response)...

BR4000-Battery/Balance Checker/ Servo & receiver testerFor LiFe, LiPo, NiCd, and NiMh (01102372-1)FUNCTIONS PER APPLICABLE BATTERY PACK:LiFe (Lithium Ferrite), LiPo/LiHV (Lithium Polymer), and...

Standard Switch Harness– With Charge JackSW Harness J-Series w/Charge Cord Mini (SWH-13)

This is the Servo Lead and Connector for the Futaba S3108 Micro Servo. FEATURES: J style connector with slim lead INCLUDES: One Servo Lead and Connector for the Futaba S3108 Micro...

Servo EyeletsFor S9350, S9451, 20 Pack (EBS3264)

Electronic push button switch designed for RC cars and applications that pull 10amps continuous or less.Great for Nitro RC Cars, sport airplanes, pylon racers, and F3C helicopters.4.8-8.4v input...

FEATUREST-FHSS AIR/S-FHSS 2.4 GHZ MULTI FUNCTION 8-CHANNEL TRANSMITTER:The Futaba 2.4 GHz T-FHSS Air system/S-FHSS system is employed.TELEMETRY SYSTEM (CAN’T BE USED IN CASE OF S-FHSS):A T-FHSS Air...

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

R404SBS-E– F-4G Telemetry receiver (indoor optimized)High Speed Response System For EP Car Models (01102363-1)F-4GSIZE:1.00×0.81×0.42 Inch25.5×20.7×10.6 mmWEIGHT:5.7 g0.2 ozOPERATING VOLTAGE:DC 3...

Replacement or spare battery for T32MZ1s (3.7v) LIPO 6600mAh batteryUSE SUPPLIED T32MZ CHARGER ONLYBattery is designed to only be charged installed in the T32MZ battery compartment and charging...

S-AG300 – S.Bus2 High-Voltage Narrow Airplane ServoHigh Performance Ultra Micro ServoFEATURES:– For Glider/ F3K– Programmable/HV Coreless Servo.– Programmable and compatible with S.Bus and S.Bus2...

FEATURES:– Integrated rate gyro, compact size, and light weight– 3-Axis Gyro plus 3-Axis Accelerometer– Auto recovery–  Four flight modes: (Auto recovery/Normal/AVCS/Gyro OFF)– Supports 2...

Neck Strap – Black with Orange LogoFutaba Neck Strap (EBB1063)LENGTH:24 inchesSTRAP WIDTH:1 inch

Bag S2 Transmitter Bag A/S

FEATURESCompatible with the Futaba 7PX 2.4GHz T-FHSS Super Response7-Channel Surface SystemPlastic constructionProtects LCD screen from damageINCLUDESTransmitter Screen Protective...

FEATURESCompatible with the Futaba 7PX 2.4GHz T-FHSS Super Response7-Channel Surface SystemFoam gripPlastic wheel with dark chrome finishOptional wheel is slightly larger than stock 1.6" (41mm)...

DESCRIPTIONT4PX/T7PX Rubber Grip – LargeBlack Rubber Grip – 4.4″ Length – Thicker than Small Version (UBT3330)

This is the Small Rubber Grip for the Futaba 4PX Transmitter.FEATURESConstructed of molded rubber, black in colorSame length, but thinner and softer than large rubber gripFastens to left side of...

DESCRIPTIONMagnetic Governor Sensor Magnets2-Pack (UBS3466)CONTENTS:– 2 x Magnets– 1 x Sheet of Wire Labels

DESCRIPTION4PX/7PX Brake Lever – Extra/Super Small13 mm Brake Trigger SS (Super Small) for Tx 4PX or 7PX (UBB1156)This aluminum throttle/brake lever is smaller than the width of the one provided with...

INCLUDES:1 x FBC-19B(4) Wall ChargerINPUT:120V – AC – 60 Hz – 7WOUTPUT:Tx: 9.6 VDC – 70 mARx: 4.8 VDC – 100 mACAUTION: THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR FLOOR...

.

Wheel Foam for use on the            Futaba 4PK 4-Channel 2.4GHz TransmitterFEATURES: Foam...

This is the Carbon Carrying Handlefor the Futaba 3PV and 4PV Surface Radio Systems.FEATURESCarbon fiber constructionFastens to back of transmitter with enclosed hardwareINCLUDESCarbon Carrying...

This is the Trainer Cord for the Futaba 12FG or 8FG series of radios. FEATURES: For use when the Futaba 8FG or 12FG is used with another Futabatransmitter with a micro port and standard 9.6V...

.

These are two 1100mm Receiver Antenna Wires from Futaba. FEATURES: White in color INCLUDES: Two 1100mm Receiver Antenna Wires REQUIRES: Soldering onto receiver SPECS: Length: 1100mm (43") each This...

Rectangular 8 cell Tx battery case with a 9V connector moldedin one end. It fits radios such as the 3PB (if you're not using NiCds).This will also work on the 2P, 2PKA.

FEATURES: Designed for use with the Futaba GY701, CGY750 and GV-1 governors Ideal for use with the O.S. 55HZ-R and 91HZ-R heli engines Monitors and maintains RPM at a selected level Eliminates the...

This is the Futaba CPS-1 Channel Power Switch. FEATURES Allows LED light systems to be controlled from a transmitter with at least three...

FEATURES Compatible with the following Futaba FASSTest and T-FHSS S.Bus2 systems; 18MZ-WC, 18MZ, 18SZ, 4PX-R and 4PX Vibration and/or audible alarms Collects real time motor current, battery...

This is the Futaba Brushless Motor RPM Sensor.FEATURESCompatible with the Futaba 18MC-WC, 18MZ, 18SZ, 14SG, 10J, 6K,4PX-R, 4PX, 4PV, 4GRS and 4PLS systemsFor use with Futaba telemetry transmitters...

FEATURES For use with Futaba telemetry equipped SBUS 2 port receivers One year limited warranty beginning at date of service   ...

FEATURES: This sensor allows you to monitor engine temperature with your transmitter. INCLUDES: One sensor REQUIRES: S.BUS compatible receiver SPECS: Temperature range: -4deg F (-20deg C) to ~392deg...

FEATURES Flight attitude controller and stabilizer designed for small to large electric models only Suitable for inverted flight and aerobatics Beginner's mode assists beginners with automatic...

FEATURES Brushless motor Optimized for use with a glow powered RC vehicle Futaba S.BUS2 system can be connected to a PC using the CIU-2 USB adapter...

This is the Futaba R334SBS 2.4GHz TFHSS 4-Channel SBus-2 Receiver.       FEATURES Designed for use with Futaba surface...

This is the Futaba R304SBE 2.4GHz T-FHSS S.BUS2 4-channel Telemetry Receiver. FEATURES Only for use with electric powered RC vehicles,...

This is the Futaba R304SB 2.4GHz FHSS 4-Channel Telemetry Receiver. FEATURES Used with the Futaba 4PLS, 4PX, and 4GRS 2.4GHz T-FHSS...

FEATURES: Compatible with all Futaba FHSS/S-FHSS transmitters            **Not compatible with FASST...

Futaba R204GF-E-S-FHSS 2.4GHz Four Channel HV Micro Receiver.FEATURES: Ideally sized for 1/10 and 1/12 scale vehicles including rock           ...

This is the Futaba 3.9" (100mm) S.Bus Hub with Cable. FEATURES: Connects servos to the S.Bus system and also allows the use of remotebattery packsOne year limited warranty through manufacturer...

DESCRIPTION4PX/7PX Brake Lever – Small15 mm Brake Trigger SS (Small) for Tx 4PX or 7PX (UBB1155)

FR2F3000 – 3000 mAh Receiver LiFe BatteryLithium Ferrite Battery for receivers that correspond to 7.4V as the power-supply voltage, do not use with other devices. (EBA0147) NOTE: This is for RECEIVER...

.

FR2F1700 – 1700 mAh Receiver LiFe BatteryLithium Ferrite Battery for receivers that correspond to 7.4V as the power-supply voltage, do not use with other devices. (EBA0145) NOTE: This is for RECEIVER...

FR2F1800 – 1800 mAh Receiver LiFe BatteryLithium Ferrite Battery for receivers that correspond to 7.4V as the power-supply voltage, do not use with other devices. (EBA0144) NOTE: This is for RECEIVER...

GYD550 is a advanced gyro system designed to be used with 1/10th scale slick, carpet, and all drift surfaces. Having features such as SR Mode for superior response, and user adjustable parameters...

Servo Grommets – SplitFor S3003, 20 Pack (FSH-48)

Servo Grommets – SquareFor S134, S3302, 20 Pack (FSH-46)

.

This is a Futaba Slim Lead Aileron Servo Extension with Futaba J Connectors. FEATURES: Goes between receiver and aileron servo to make the wire longer On one end of the wire is a male "J" connector...

12K Transmitter – 14-Channel Digital Proportional RC System2-Stick, 14-Channel, T-FHSS Air 2.4 GHz System (01004343-3) (01004345-3) (01004344-3)FEATUREST-FHSS AIR SYSTEM:The 12K transmitter has...

APPLICATION:This product is the gear grease for Futaba’s servos. This gear grease is specially blended to maximize servo performance.This grease is also applicable to movable parts such as swing-arms...

This is the Short Drop Down Transmitter Wheel Adapter for use with the Futaba 4PK FEATURES: Nylon constructionBlack in color INCLUDES: One Short Drop Down Transmitter Wheel Adapter REQUIRES: Use...

DESCRIPTIONTrainer Switch – ML-1FLP LongSolder-On Switch (UBT3443)

DESCRIPTIONThree-Position Switch – ML-1BFLP LongSolder-On Switch (UBT3442)

DESCRIPTIONThree-Position Switch – ML-1BFSP ShortSolder-On Switch (UBT3441)

DESCRIPTIONTwo-Position Switch – ML-1BFLP LongSolder-On Switch (UBT3347)

DESCRIPTIONTwo-Position Switch – ML-1AFSP ShortSolder-On Switch (UBT3339)

DESCRIPTIONGyro Mounting Pads – CGY7502 mm x 22 mm x 22 mm, 10 Pack (UBS3403)

DESCRIPTIONWire Securing Strap (Hook and Loop)– “Magic Tape Strap”(UBB1052)CONTENTS:1 x Strap – 20 mm x 300 mm2 x Strap – 8 mm x 250 mm

DESCRIPTION600 mm Servo Lead ZH-ZHFor SVI Servo Interconnect – Gold Plated (UBB0159)

DESCRIPTION500 mm Servo Lead ZH-ZHFor SVI Servo Interconnect – Gold Plated (UBB0158)

DESCRIPTIONGyro Mounting Pads3 mm x 22 mm x 22 mm, 10 Pack (FSH-70)

DESCRIPTION130 mm Gyro ExtensionFor GY520 (FSH-68)

DESCRIPTION80 mm Gyro ExtensionFor GY520 (FSH-67)

DESCRIPTION350 mm Gyro ExtensionFor GY520, 2 Pack (FSH-65)

DESCRIPTIONGyro Mounting PadsFor CGY760R – 10 Pack (EBS3465)

This is an optional Futaba Extension Hook for the 10C 2.4GHZ Transmitter Only. FEATURES: Aluminum constructionSilver in colorThree position hole optionsAttaches to neck strap loop for angle...

This trainer cord is designed to go between two Futaba 9C radios. This comes with the "Micro" plug on BOTH ends. INCLUDES One Black Micro to...

This is a Futaba 6" Long Dual Servo Extension with Futaba "J" connectors.This extension allows you to hook up two servos to one channel on the receiver.One end of the wire has a male connector, but...

This is a Aileron Servo Extension with Futaba J Connectors. This extension goes between the receiver and the aileron servo to make the wire longer. On one end of the wire is a male "J" connector, the...

FEATURESFor parkflight, indoor, and small size model aircraftMono directional - no telemetryINCLUDESFutaba R3206SBM (T-FHSS Mono/S.Bus2) ReceiverSPECIFICATIONSDimensions: 1.24 x 0.39 x 0.12" (34...

This is the Wheel for the Futaba 4PK Transmitter FEATURES: Nylon construction Silver in color INCLUDES: One Transmitter Wheel REQUIRES: Installation on the transmitter SPECS: Outer Diameter: 44mm (1...

1500 mm S.Bus Servo Hub Cable

This is the Futaba 39.4" (1000mm) S.Bus Hub with Cable. FEATURES: Connects servos to the S.Bus system and also allows the use of remotebattery packsOne year limited warranty through manufacturer...

This is the Futaba 19.7" (500mm) S.Bus Hub with Cable. FEATURES: Connects servos to the S.Bus system and also allows the use of remotebattery packsOne year limited warranty through manufacturer...

This is the Futaba 12" (300mm) S.Bus Hub with Cable. FEATURES: Connects servos to the S.Bus system and also allows the use of remote battery packs One year limited warranty through manufacturer...

This is a Aileron Servo Extension with Futaba J Connectors. This extension goes between the receiver and the aileron servo to make the wire longer. On one end of the wire is a male "J" connector and...

DESCRIPTION300 mm J-Series Aileron Extension CordLightweight/Slim (AEC-26)

DESCRIPTION1000 mm J-Series Aileron Extension CordFor Digital Servos (AEC-18)

DESCRIPTION500 mm J-Series Aileron Extension CordFor Digital Servos (AEC-17)