Futaba

R2008SB 2.4GHz S.Bus S-FHSS 8 Channel Receiver         FEATURES: For aircraft models          Dual Antenna...

FEATURES: This sensor provides the RPM of a motor to the Futaba 18MZ transmitter INCLUDES: Two screws Two nuts Two cylindrical magnets Four flat washers Two lockwashers Sensor unit Adapter cable...

R404SBS– F-4G telemetry receiverHigh Speed Response System For Surface Models (01102364-1)F-4GSIZE:1.00×0.81×0.42 Inch25.5×20.7×10.6 mmWEIGHT:5.7 g0.2 ozOPERATING VOLTAGE:DC 3.7V-7.4V

CONTENTS:T4PM+ TransmitterR304SB Dry Battery HolderMini ScrewdriverFEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super...

PS-10 – Micro Digital Air ServoFor Small Electric Powered Models (PS-0100)Servo Size MicroHobby Airplane, HelicopterProduct ServoFeaturesDigitalSPEED: 0.10s./60°TORQUE: 1.2 kgf.cm at 5vSIZE: 21.5× 11...

4PM Plus Transmitter – Super Response Digital Proportional RC SystemFor Use with Surface Models (01004414-3) (01004416-3) (01004415-3) (01004418-3)FEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY...

S-U301– Standard Digital and S.Bus2 Capable Airplane Servo with Accessory Pack (01102322-1)SPEED:0.18 sec/60°at 6.6V0.16 sec/60° at 7.4VTORQUE:3.5 kgf/cm at 6.6V48.6 ozf/in at 6.6V3.9 kgf/cm at 7...

Transmitter carrying boxFor Air Transmitters (UBB1220)FEATURES:– Durable hardshell gloss black finish.– Rubber handle with backbone for increased grip and rigidity.– Sized to fit in any overhead...

GYD470– Drift Car Counter Steer GyroRate Gyro for DRIFT RC Cars: Steering Use (01102373-3)FEATURES:– Dedicated RC drift car setting– Remote gain function and mode switching function– Integrated,...

This is the FT2F2100BV2 6.6V 2100mAh LiFe Transmitter Battery.FEATURESFor use with the Futaba 18SZ, 14SG, 10J, 6K, 6J, 4PV, 4PX/R, 4GRS,4PKS/SR and 4PL/LSINCLUDES6.6V 2100mAh LiFe Transmitter Battery...

This is the FT2F2100BV2 6.6V 2100mAh LiFe Transmitter Battery.FEATURESFor use with the Futaba 18SZ, 14SG, 10J, 6K, 6J, 4PV, 4PX/R, 4GRS,4PKS/SR and 4PL/LSINCLUDES6.6V 2100mAh LiFe Transmitter Battery...

GYC470– All-Purpose Car GyroRate Gyro for RC Cars: Steering Use (01102374-3)FEATURES:– Dedicated RC car setting– Remote gain function and mode switching function– Integrated, compact, and light...

CONTENTS:T4PM+ TransmitterR304SB-E Receiver - NEVER USE THE R304SB-E IN GP CARSDry Battery HolderMini ScrewdriverFEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS...

CONTENTS:T4PM+ TransmitterDry Battery HolderMini ScrewdriverFEATUREST-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS:In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response)...

BR4000-Battery/Balance Checker/ Servo & receiver testerFor LiFe, LiPo, NiCd, and NiMh (01102372-1)FUNCTIONS PER APPLICABLE BATTERY PACK:LiFe (Lithium Ferrite), LiPo/LiHV (Lithium Polymer), and...

This is the Servo Lead and Connector for the Futaba S3108 Micro Servo. FEATURES: J style connector with slim lead INCLUDES: One Servo Lead and Connector for the Futaba S3108 Micro...

Electronic push button switch designed for RC cars and applications that pull 10amps continuous or less.Great for Nitro RC Cars, sport airplanes, pylon racers, and F3C helicopters.4.8-8.4v input...

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

S.Bus Decoders are used to communicate from a S.Bus receiver port to 3 non-S.Bus capable servos.SBD-1 can be used with S.Bus and S.Bus2; 4.8-7.4v.3 port S.Bus->PWM Converter

R404SBS-E– F-4G Telemetry receiver (indoor optimized)High Speed Response System For EP Car Models (01102363-1)F-4GSIZE:1.00×0.81×0.42 Inch25.5×20.7×10.6 mmWEIGHT:5.7 g0.2 ozOPERATING VOLTAGE:DC 3...

Replacement or spare battery for T32MZ1s (3.7v) LIPO 6600mAh batteryUSE SUPPLIED T32MZ CHARGER ONLYBattery is designed to only be charged installed in the T32MZ battery compartment and charging...

S-AG300 – S.Bus2 High-Voltage Narrow Airplane ServoHigh Performance Ultra Micro ServoFEATURES:– For Glider/ F3K– Programmable/HV Coreless Servo.– Programmable and compatible with S.Bus and S.Bus2...

Neck Strap – Black with Orange LogoFutaba Neck Strap (EBB1063)LENGTH:24 inchesSTRAP WIDTH:1 inch

This is the Small Rubber Grip for the Futaba 4PX Transmitter.FEATURESConstructed of molded rubber, black in colorSame length, but thinner and softer than large rubber gripFastens to left side of...

DESCRIPTION4PX/7PX Brake Lever – Extra/Super Small13 mm Brake Trigger SS (Super Small) for Tx 4PX or 7PX (UBB1156)This aluminum throttle/brake lever is smaller than the width of the one provided with...

.

These are two 1100mm Receiver Antenna Wires from Futaba. FEATURES: White in color INCLUDES: Two 1100mm Receiver Antenna Wires REQUIRES: Soldering onto receiver SPECS: Length: 1100mm (43") each This...

Rectangular 8 cell Tx battery case with a 9V connector moldedin one end. It fits radios such as the 3PB (if you're not using NiCds).This will also work on the 2P, 2PKA.

FEATURES: Designed for use with the Futaba GY701, CGY750 and GV-1 governors Ideal for use with the O.S. 55HZ-R and 91HZ-R heli engines Monitors and maintains RPM at a selected level Eliminates the...

This is the Futaba CPS-1 Channel Power Switch. FEATURES Allows LED light systems to be controlled from a transmitter with at least three...

This is the Futaba Brushless Motor RPM Sensor.FEATURESCompatible with the Futaba 18MC-WC, 18MZ, 18SZ, 14SG, 10J, 6K,4PX-R, 4PX, 4PV, 4GRS and 4PLS systemsFor use with Futaba telemetry transmitters...

FEATURES Brushless motor Optimized for use with a glow powered RC vehicle Futaba S.BUS2 system can be connected to a PC using the CIU-2 USB adapter...

This is the Futaba R334SBS 2.4GHz TFHSS 4-Channel SBus-2 Receiver.       FEATURES Designed for use with Futaba surface...

This is the Futaba R304SBE 2.4GHz T-FHSS S.BUS2 4-channel Telemetry Receiver. FEATURES Only for use with electric powered RC vehicles,...

This is the Futaba R304SB 2.4GHz FHSS 4-Channel Telemetry Receiver. FEATURES Used with the Futaba 4PLS, 4PX, and 4GRS 2.4GHz T-FHSS...

FEATURES: Compatible with all Futaba FHSS/S-FHSS transmitters            **Not compatible with FASST...

Futaba R204GF-E-S-FHSS 2.4GHz Four Channel HV Micro Receiver.FEATURES: Ideally sized for 1/10 and 1/12 scale vehicles including rock           ...

DESCRIPTION4PX/7PX Brake Lever – Small15 mm Brake Trigger SS (Small) for Tx 4PX or 7PX (UBB1155)

FR2F3000 – 3000 mAh Receiver LiFe BatteryLithium Ferrite Battery for receivers that correspond to 7.4V as the power-supply voltage, do not use with other devices. (EBA0147) NOTE: This is for RECEIVER...

FR2F1700 – 1700 mAh Receiver LiFe BatteryLithium Ferrite Battery for receivers that correspond to 7.4V as the power-supply voltage, do not use with other devices. (EBA0145) NOTE: This is for RECEIVER...

Servo Grommets – SquareFor S134, S3302, 20 Pack (FSH-46)

This is a Futaba Slim Lead Aileron Servo Extension with Futaba J Connectors. FEATURES: Goes between receiver and aileron servo to make the wire longer On one end of the wire is a male "J" connector...

APPLICATION:This product is the gear grease for Futaba’s servos. This gear grease is specially blended to maximize servo performance.This grease is also applicable to movable parts such as swing-arms...

This is the Short Drop Down Transmitter Wheel Adapter for use with the Futaba 4PK FEATURES: Nylon constructionBlack in color INCLUDES: One Short Drop Down Transmitter Wheel Adapter REQUIRES: Use...

DESCRIPTIONThree-Position Switch – ML-1BFSP ShortSolder-On Switch (UBT3441)

DESCRIPTIONTwo-Position Switch – ML-1AFSP ShortSolder-On Switch (UBT3339)

DESCRIPTIONGyro Mounting Pads – CGY7502 mm x 22 mm x 22 mm, 10 Pack (UBS3403)

DESCRIPTIONWire Securing Strap (Hook and Loop)– “Magic Tape Strap”(UBB1052)CONTENTS:1 x Strap – 20 mm x 300 mm2 x Strap – 8 mm x 250 mm

DESCRIPTION600 mm Servo Lead ZH-ZHFor SVI Servo Interconnect – Gold Plated (UBB0159)

DESCRIPTION500 mm Servo Lead ZH-ZHFor SVI Servo Interconnect – Gold Plated (UBB0158)

DESCRIPTIONGyro Mounting Pads3 mm x 22 mm x 22 mm, 10 Pack (FSH-70)

DESCRIPTION80 mm Gyro ExtensionFor GY520 (FSH-67)

DESCRIPTION350 mm Gyro ExtensionFor GY520, 2 Pack (FSH-65)

DESCRIPTIONGyro Mounting PadsFor CGY760R – 10 Pack (EBS3465)

This is a Futaba 6" Long Dual Servo Extension with Futaba "J" connectors.This extension allows you to hook up two servos to one channel on the receiver.One end of the wire has a male connector, but...

This is a Aileron Servo Extension with Futaba J Connectors. This extension goes between the receiver and the aileron servo to make the wire longer. On one end of the wire is a male "J" connector, the...

This is the Wheel for the Futaba 4PK Transmitter FEATURES: Nylon construction Silver in color INCLUDES: One Transmitter Wheel REQUIRES: Installation on the transmitter SPECS: Outer Diameter: 44mm (1...

1500 mm S.Bus Servo Hub Cable

DESCRIPTION400 mm J-Series Aileron Extension CordFor Digital Servos (AEC-15)

This is the FT2F2100BV2 6.6V 2100mAh LiFe Transmitter Battery.FEATURESFor use with the Futaba 18SZ, 14SG, 10J, 6K, 6J, 4PV, 4PX/R, 4GRS,4PKS/SR and 4PL/LSINCLUDES6.6V 2100mAh LiFe Transmitter Battery...

FEATURES: S-FHSS/FHSS auto detection          Normal and high-speed mode, normal mode has a frame rate output...

FEATURES: Orange nylon construction White Futaba logo Black adjustable strap clips Metal spring loaded clip INCLUDES: One strap REQUIRES: Transmitter SPECS: Length: 24" (610mm) Width: 1" (26mm)

Futaba S3306 High Torque/High Speed Servo for 1/5 Scale Cars.FEATURES: Ideal steering servo for 1/5 scale vehicles          High...

This is the Futaba R3106GF T-FHSS 6-Channel Mono Receiver.       FEATURES Standard receiver supplied with the Futaba T6L Sport,...

DESCRIPTIONGyro Mounting Pads – Soft2 mm x 22 mm x 22 mm, 10 Pack (FSH-69)

DESCRIPTION75 mm (3″) Y-Harness Micro ConnectorS3108M, S3110M, S3111M (AEC-29)

This is the Futaba CIU-3 USB PC Interface.FEATURESCIU-3 interface makes it easy to program all 35+ Futaba S.Bus andS.Bus2 servosAlso updates Futaba gyro and 4PX and 6K firmwareYou will need to...

This is the Futaba 3PV 3-Channel FHSS/T-FHSS, S-FHSS Radio System with the 3-Channel R203GF Receiver. FEATURES FHSS/T-FHSS, S-FHSS...

Specification-Speed   0.11 sec/60°@7.4V                                         ...

.

FEATURES: Assembled and shrinkwrapped INCLUDES: 7.2V 1700mAh NiMH Battery for the Futaba 12FG transmitters REQUIRES: Charging at 170mA for 12 hours, order FUTM1805 if charger is needed SPECS:...

This is the Futaba R3006SB T-FHSS 2.4GHz S.Bus2 6/32 Channel Receiver. FEATURES Bi-directional communication with a T-FHSS Air-2.4GHz...

FEATURES: For use with the 4-PL S-FHSS four channel surface radio          Flexible coaxial antenna that's easy to position inside a model...

This is the Futaba 3PV 3-Channel FHSS/S-FHSS/T-FHSS Telemetry Radio System with the 4-Channel R304SB T-FHSS Telemetry Receiver. FEATURES ...

FEATURES: Ideal upgrade for radios found in RTR vehicles          Throttle and steering trim and...

This is the Hook Adapterfor the Futaba 4PV Surface Radio Systems.  FEATURESPlastic bracket and aluminum hook installs under hand grip and allows a neck strap to be attached INCLUDESNeck Strap...

Telemetry Sensor-Increased accuracy over previous version-Speed Range 0-311mph-Altitude -700-+5500 yards-Length 6.9″ (175mm)-Weight 11g-Input Voltage 3.7-7.4V

FEATURES: High-voltage (4.8 - 7.4V) capability eliminates the need for a            regulator when using a 2S 7.4V LiPo pack as a power...

This is a Futaba Servo Extension for J-series systems. This is used between a receiver and usually a wing servo for extra length. INCLUDES: One 16" Aileron Extension w/one female and one male "J"...

This is the Futaba 12KA 2.4GHz T-FHSS S.Bus2 14 Channel Computer Radio System with the R3008SB Receiver. This is the airplane version which will default to airplane settings when powered up...

FEATURES For use with 1/10 scale on-road vehicles Adjustable programming for Deadband, Smoother, Damper, Stretcher and Boost (Futaba CIU-2 or CIU-3...

FEATURES Aluminum electrolyte type Works with 4.8V and 6V powered receivers Connects between receiver and battery to stabilize power delivery due to momemtary voltage drops such as sudden...

This is a Futaba Receiver Charge Cord with preinstalled leads. FEATURES: One receiver battery charge adapter for Futaba radios with a set ofpreinstalled leads with bare ends to allow different...

This is the Futaba T6L Sport 6-Channel T-FHSS Air Radio System.Transmitter and R3106GF Receiver Only, Servos Not Included.FEATURESElevon, V-Tail and Flaperon mixingBuilt-in full-range transmitter...

FEATURES: Brushless motorWater protectedHybrid (titanium/metal) gears with two ball bearingsProgrammable and compatible with S.Bus and S.Bus2 systemsHigh voltage handles extra speed and power...

The Futaba BLS251SB is a digital rudder servo designed for tail rotor control of helicopters. It succeeds the BLS251 with its new S.Bus feature and is directly programmable by the FASSTest 18MZ...

The 10J has it all! Futaba consistently delivers the very best radios and the 10J is no exception. Its full list of features is below, but here are a few of the best: 10 channels, telemetry...

This is the Futaba High Voltage BLS273SV S.Bus2 HSProgrammable Servo for Flybarless Heli Applications. FEATURES: Designed to be used with helis requiring high speed and high torqueBrushless motor...

This is the Futaba SBS-01S S.Bus2 Servo Sensor.     FEATURES Monitors and displays in-flight current, operating angle and...

This is the Futaba CA-RVIN-700 External Voltage Input Cable. FEATURES: Used to connect a Futaba telemetry equipped receiver to an extravoltage port INCLUDES: Cable, Fuse, Heat Shrink Tube and...