Hot Racing

Hot Racing aluminum threaded rear shock bodies for 1/10 Arrma 4X4 Mega and 3S BLX vehicles. See vehicle compatibility in comments below.FEATURES:- Threaded shock bodies for easy, precise, and...

Hot Racing heavy duty splined star drive CVD axle kit for the front or rear of the Traxxas 1/10th scale MaxxFEATURES:- CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and...

This is the Hot Racing Monster 50 x 50 X11mm Blower Motor heat sink Fan with Mount for Arrma 1/10 4x4 BXL. The kit includes everything needed to add a forced-air motor cooling fan to the Arrma 1/10...

Hot Racing aluminum shocks for the Axial SCX24, or other mini/micro crawler. These shocks are friction damped, requiring only a partial filling of silicone oil. The include a machined reservoir shock...

FEATURES:- Billet machined aluminum construction, black in color- Replaces stock plastic steering knucklesYOU WILL RECEIVE:- One (1) left and one (1) right steering knuckleREQUIREMENTS:- Installation...

Hot Racing front or rear Heavy Brass hub adapters for Element Enduro vehiclesFEATURES:- CNC machined solid brass billet- Emliminate the the stock hex drive- Adds 75g per hub to the Stock Wheel...

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24FEATURES:- CNC machined solid brass billet- 9g each fitted to the wheels to lower the vehicles center...

Hot Racing billet aluminum gear dust cover for the Axial SCX24FEATURES:- Gear protection with fantastic looks- Cover is CNC machined billet aluminum, anodized BlackYOU WILL RECEIVE:- One (1) gear...

Hot Racing optional aluminum transmission case for the Axial SCX24 vehiclesFEATURES:- CNC machined aluminum construction- Replaces factory plastic transfer case housing- Direct fit hop up requires no...

Hot Racing aluminum servo mount bracket for the Axial SCX10 24FEATURES:- CNC machined billet aluminum, anodized black- Securcre servo mount over stock plastic mount- Stiffer Upper linkage mount-...

Hot Racing aluminum rear chassis brace for the 2018 "V3" Arrma Talion BLX. See vehicle model compatibility in comments below.FEATURES:- CNC machined 6061 aluminum, anodized black- Machined pockets...

Hot Racing optional upgrade aluminum link set for 5.25" (133.5mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 by upgrading your stock plastic links with the Hot Racing aluminum link...

Blue Hot Racing single arm servo arm for Traxxas TRX-4 FEATURES: CNC Aluminum construction,  Anodized Blue in color one diameter linkage holes YOU WILL RECEIVE: one blue single arm...

Hot Racing machined billet Brass wheels (rims only) for the 1/24 Axial SCX 24FEATURES:- Fits Axial SCX 24 tires only (AXI31567)- CNC machined billet Solid Brass- No Hex Drive design to maximize wheel...

Hot Racing option aluminum skid plate for the Axial SCX 24FEATURES:- CNC machined billet aluminum construction- Black anodizing for durability, corrosion resistance, and great looksYOU WILL RECEIVE:-...

Hot Racing's machined aluminum rear axle housing and Worm Gear cover for the Axial SCX 24 RTR vehiclesFEATURES:- CNC machined billet aluminum axle housing and tubes, anodized black- CNC machined...

Hot Racing's machined aluminum front axle housing and Worm Gear cover for the Axial SCX 24 RTR vehiclesFEATURES:- CNC machined billet aluminum axle housing and tubes, anodized black- CNC machined...

Hot Racing aluminum front bumper mount frame crossmember for the Axial SCX24 vehicles.FEATURES:- Stronger and more rigid than factory plastic cross-member for a more rigid frame and more predictable...

Hot Racing CV rebuild kit for Hot Racing SOFE288 Mini 8ight CV axlesFEATURES:- Steel constructionYOU WILL RECEIVE:- Two (2) steel CVA couplers (barrels)- Two (2) steel CVA cross pins- Two (2) steel...

Hot Racing aluminum servo cable mount (servo wire holder/clip) for the 1/8 Arrma Big Rock BLX, Fazon BLX, and Nero BLX. See vehicle model compatibility in comments below.FEATURES:- CNC machined...

Hot Racing 17mm Splined Hubs aluminum wheel hexes for the front and rear of the 1/10th Traxxas Maxx 4WD vehicles..FEATURES:- 6061 aluminum construction- Blue in color- Fits 1/10th Traxxas Maxx 4WD...

Hot Racing 17mm extra large serrated wheel nuts for the Axial Yeti XL RTR and Arrma 1/10 4X4 4S BLX, Traxxas Maxx 1/10These wheel nuts looks great and will lock the wheels in place with the large hex...

Hot Racing aluminum Rear Lower arms for the Losi 2WD Mini-T2.FEATURES:- Replaces Stock plastic Rear lower arms- CNC machined aluminum, anodized black.- Precision made for perfect bolt-on fitYOU WILL...

Hot Racing factory spec Linear rate rear shock springs for the Losi Mini-T2 vehiclesFEATURES:- Spring steel construction- Maintains spring rates of factory-available upgrade springsYOU WILL RECEIVE:-...

Hot Racing factory spec Linear rate front shock springs for the Losi Mini-T2 vehiclesFEATURES:- Spring steel construction- Maintains spring rates of factory-available upgrade springsYOU WILL...

This is a 4 pack of Shield 3X6x2.5 mm Ball Bearings.Great for Updating Losi MiniT2 steering bellcrankFEATURES:Metal bearing constructionmetal shieldsYOU WILL RECEIVE:Four 3x6 mm ball...

Hot Racing Steel Chrome Pivot Ball 3x8x12mm for Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- CNC Harden #45 Steel- Smooth Chrome finishYOU WILL RECEIVE:Four (4) Steel Chrome Pivot Ball...

Hot Racing Steel Chrome Pivot Ball 3x7.8x10.5mm for Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- CNC Harden #45 Steel- Smooth Chrome finishYOU WILL RECEIVE:Four (4) Steel Chrome Pivot Ball 3x7.8x10...

Hot Racing machined aluminum Transmission case Output Gear Cover for the Traxxas TRX-4 vehiclesFEATURES:- CNC machined aluminum construction- Replaces factory plastic Transmission case Gear Box...

Hot Racing S2 hardened spring steel portal drive stub axles for the Traxxas TRX-4FEATURES:- CNC machined S2 hardened spring steel- Upgrades stock axles or provides a replacement for worn or damaged...

Hot Racing aluminum REAR hinge pin brace arm mount on the FRONT LOWER suspension of Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- Eliminates the need for stock plastic and stamp aluminum hinge pin...

Hot Racing aluminum front chassis brace for the "V3" and "V4" Arrma Talion BLX. See vehicle model compatibility in comments below.FEATURES:- CNC machined 6061 aluminum, anodized black- Machined...

Hot Racing aluminum FRONT hinge pin brace arm mount on the REAR LOWER suspension of Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- Eliminates the need for stock plastic hinge pin mount- Secure M4 set...

Hot Racing aluminum cross-drilled slipper pad for 1/10 Arrma 4X4 vehicles. See requirements and comments below for specific vehicle fit information. FEATURES:- Cross-drilled aluminum...

Hot Racing aluminum differential spool (locker) hub for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, Typhon BLX and 1/7 Limitless Infraction, Fits the front, center,...

Hot Racing aluminum rear bumper mount for Axial SCX10 II vehicles FEATURES: - One-piece CNC machined 6061 aluminum construction - Black anodized finish - Secondary-processed machined...

Hot Racing replacement 6mm steel input coupler for the Hot Racing ERVT288RCFEATURES- CNC machined #45 steel constructionINCLUDES- One (1) couplerSPECIFICATIONS:- Overall length: 17.2 mm- diamemter...

Hot Racing's machined aluminum Counter Balance Output transfer case for the Axial SCX10 II Kit vehicles (not RTR)FEATURES:- This is for a heavy weight crawler that need a counter balance output to...

This is the optional Hot Racing Rear Bumper with Tow Hook in Black for the Axial SCX-10 2FEATURES:Billet CNC machined aluminum construction, black in colorOne CNC Aluminum tow hook with Steel BallTwo...

Hot Racing 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES:- CNC machined hardened steel construction- Black oxide finished-...

Hot Racing heavy duty aluminum hub nuts (pillow block bushings) with Delrin pivot ball cups for the 1/8 Arrma Kraton BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX FEATURES: - CNC...

Hot Racing aluminum FRONT hinge pin brace arm mount on the FRONT LOWER suspension of Arrma 1/8 4X4 vehiclesFEATURES:- Eliminates the need for stock hinge pin mount- CNC machined 6061 aluminum...

Hot Racing Aluminum Gearbox Case Bulkhead Cover for the front or rear of the 1/8 BLX Arrma Kraton, Outcast, Senton, Talion, and Typhon. See vehicle model compatibility in comments below...

Hot Racing 54 tooth hardened steel Modulus 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES:- CNC machined hardened steel construction- Black oxide...

Hot Racing aluminum front bumper with LED light buckets, winch mounting pattern, and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper,...

Hot Racing machined billet aluminum 1.9 beadlock wheels (rims only) for the 1/18 Losi Mini-Rock Crawler 1.9 tires, or similar FEATURES: - True beadlock design, no gluing required - Fits Losi...

This is the optional Hot Racing stainless Steel armor skid plate is the ultimate protection from any rock strikes.  For the front or rearof Traxxas TRX4 FEATURES: Formed from a single...

This is the optional Hot Racing stainless Steel Center armor skid plate is the ultimate protection from any rock strikes.  For the center of Traxxas TRX4 FEATURES: Formed from a...

Hot Racing aluminum center differential mount for the Arrma Kraton BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX. See vehicle model compatibility in comments below.  FEATURES: -...

Hot Racing aluminum sealed differential case with Hardened steel cog differential gear for the 2WD Traxxas Stampede, Rustler, Bandit, 2WD Slash, and Monster Jam vehiclesFEATURES:- CNC machined...

Aluminum front bumper with stinger, LED light buckets, winch mounting pattern, and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper, anodized...

Hot Racing optional hop-up ICE Cube Style rock rail side step for the Traxxas TRX-4 FEATURES: - CNC Billet machined aluminum construction - Anodized black with aluminum ICE Cube Style on...

Hot Racing aluminum Grille Guard for TRXF03CF01 with LED light buckets, for the Traxxas TRX-4  FEATURES: - CNC machined billet aluminum bumper, anodized semi-flat black - Pre-drilled mm...

Hot Racing Rear S2 Spring Steel axle shafts for the TRX4 Rear Portal axle  FEATURES: - CNC Hardened S2 steel construction Axle - Replaces worn or damaged axle shafts and gear YOU WILL...

Hot Racing aluminum front bumper with LED light buckets, winch mounting pattern, and tow shackles for the Axial SCX10 Dingo, Jeep, and Honcho FEATURES: - CNC machined billet aluminum bumper,...

Hot Racing aluminum short rear chassis brace for the Arrma Outcast BLX, Senton BLX, and Typhon BLX, FEATURES: - CNC machined 6061 aluminum - Red anodized - Machined pockets and...

Hot Racing aluminum front chassis brace for the Arrma Kraton BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX FEATURES: - CNC machined 6061 aluminum - Black anodized - Machined...

This is a quantity of six Hot Racing Factory Spec Rear Spring Sets for shocks on the Axial Yeti XL.     FEATURES Cold coiled steel...

This is the the optional Hot-Racing Differential Spool Gear for 1/10 Tamiya Clod Buster and Super Clodbuster.     FEATURES CNC...

Hot Racing optional upgrade heavy duty spline star drive axle kit for SCX II and TRX4 FEATURES: - CNC machined #45 hardened carbon steel and Aluminum construction - Replaces...

Stainless Skid Plate Bumper: - Axial SMT Ultimate in front protection from damage from any rock strikes. FEATURES: formed from a single piece of 0.6mm stainless steel plate. it fit...

Hot Racing aluminum steering bellcrank for the 1/18th scale LaTraxx Rally, SST, and Teton. FEATURES: - CNC machined aluminum, anodized black and silver - Factory assembled...

Hot Racing's optional carbon fiber rear rocker arm mount plate set for the Hot Racing GVXS27RX or VXS27RX rear rocker arms on the Traxxas 1/16 E-Revo VXL or 1/16 Slash. FEATURES: - Carbon...

Hot Racing aluminum 1/10th scale blue tow shackles (D-rings) for the Axial SCX10 Jeep, the AX80125 front bumper, the AX80126 rear, or other custom project FEATURES: - Metal case with a high...

Hot Racing differential spool locker for the 1/10th scale Traxxas Bandit, 2WD Electric Slash, Ford Raptor, Electric Rustler, and 2WD Electric Stampede truck. This part replaces the differential gears...

This is the optional Hot Racing Aluminum Brake Disc Add-On for Traxxas 1/16 Revo FEATURES: Gives the center of your wheel the cool look of a high performance brake disc Silver colored...

FEATURES: - Replaces the Axial factory plastic outer beadlock wheel covers - CNC machined 6061-T6 aluminum construction - Anodized black with secondary process CNC machining for a dialed look -...

This is the optional Hot-Racing Front Bumper Mount for the Axial SCX10 Jeep.     FEATURES CNC 6061 aluminum construction with black...

This is the Hot Racing Rear Axle Assembly for the Axial SCX10. FEATURES CNC milled aluminum housing CNC machined billet center housing, axle tubes,...

Hot Racing dirt guard chassis cover for the 1/8 scale Arrma Nero and 1/10 scale Traxxas E-Revo 4X4. The chassis cover attaches to the chassis with easy-to-apply hook and loop tape; has zipper...

These are the optional Hot-Racing Lower 4-Link Mounts for the Axial Yeti Kit and RTR.     FEATURES CNC machined aluminum construction,...

This is the optional Hot-Racing Servo Mount for the Axial XR10, Wraith and Ridgecrest.     FEATURES 6061-T6 CNC machined aluminum...

FEATURES: -Robust CNC machined 6061 aluminum -Added fastener points to secure, lock, and secure gear mesh -Replaces the stock plastic bulkhead for increased durability -Silver...

.

This is the Hot Racing 86T/48P Spur Gear for the 2WD Traxxas Bandit, Rustler, Slash and Stampede.     FEATURES CNC machined and...

.

This is the optional Hot-Racing Stainless Steel Wheelie Bar for the 1/10 scale Traxxas E-Revo, Revo 3.3, Slayer Pro 4X4, and Summit.     FEATURES ...

FEATURES: - Heavy duty CNC machined #45 hardened carbon steel construction - Replaces factory plastic drive axles - Red anodized aluminum pin capture rings with rubber o-rings to prevent...

This is the optional Hot Racing 12mm Hex Wheel Hub Conversion for the Axial Yeti.     FEATURES CNC machined blue anodized aluminum hex...

This is the Hot-Racing Hardened Steel Top Drive Gear for the Axial Wraith, AX10, and SCX10.     FEATURES CNC machined #45 hardened...

This is the Hot-Racing Front and Rear Shock Tower for the Axial SCX10.     FEATURES CNC aluminum construction, black in color Machine...

These are the Hot Racing Steering Knuckles for the Axial XR-10 and Wraith.     FEATURES CNC milled 6061 aluminum construction, anodized...

This is the Hot Racing Carbon Fiber Battery Holder for the Axial Yeti.     FEATURES 0.12" (3mm) thick carbon fiber...

This is the optional Hot-Racing Steering Rack for the Vaterra Twin Hammers.     FEATURES CNC aluminum construction, anodized black in...

This is the Hot Racing Monster Blower Motor Heat Sink Fan for the Traxxas X-Maxx. FEATURES Clamps to the stock motor heat sink Uses...

This is the Hot Racing Heavy Duty Slipper Pressure Plate and Hub for the Traxxas X-Maxx. FEATURES CNC machined hard anodized aluminum...

These are the Hot Racing 5mm Wheel Extensions for the Axial Yeti Kit and RTR.     FEATURES Machined aluminum construction, anodized...

These are the Hot Racing 5mm Wheel Extensions for the Axial Yeti Kit and RTR.     FEATURES Machined aluminum construction, anodized...