Hot Racing

Hot Racing double clamping servo horn (servo arm) for 25 spline (Futaba/Traxxas/Savox/Orion/ProTek) servosFEATURES:- Lock clamp gives precise and secure fit- CNC machined 6061 aluminum, anodized...

Hot Racing optional upgrade aluminum link set for 5.26" (133.7mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 with LWB by upgrading your stock plastic links with the Hot Racing...

Hot Racing Aluminum Super Duty Multi-Function Pliers Toolsmore than just a shock tool a must have tool for every racers pit bagFEATURES:- CNC machined aluminum construction Multi-Function Pliers...

Hot Racing brush-less black steel 32 pitch 13 tooth pinion gear.FEATURES:standard 4140 steel and heat treatheavy duty 4mm set screw for brush-less powerYOU WILL RECEIVE:one 32 pitch 13 tooth pinion...

Hot Racing aluminum front shock tower for the Arrma Limitless, Infraction See vehicle model compatibility in comments below.FEATURES:- CNC machined 6061 aluminum, black anodized- Increased shock...

Hot Racing single arm aluminum Clamp servo arm for Axial UTB RTR (Or any 23T servo)FEATURES:CNC Aluminum construction,Anodized Black in colorone diameter linkage holesYOU WILL RECEIVE:one black...

Hot Racings CNC machined aluminum front axle housing for the Axial UTB vehiclesFEATURES:- CNC machined billet aluminum axle housing and tubes, anodized black- Replaces factory plastic axle case...

Hot Racing aluminum Rear bumper mount frame crossmember for the Axial SCX10 III vehicles.FEATURES:- Stronger and more rigid than factory plastic cross-member for a more rigid frame and more...

Hot Racing stainless steel skid plate for the center belly pan of the Axial SCX24.This skid plate is the ultimate rock strike protection.FEATURES:- Formed from a single sheet of Stainless steel plate...

Hot Racing stainless steel skid plate for the front or rear axle of the SCX-24.This skid plate is the ultimate rock strike protection.FEATURES:- Formed from a single sheet of Stainless steel plate...

Hot Racing front or rear wheel weights for Hot Racing +4mm Steel Drive Stub (SXTF39W04) on the Axial SCX24FEATURES:- CNC machined solid brass billet- 5g each fitted to the +4mm Steel Drive Stub Axlex...

Hot Racing optional upgrade heavy duty splined star drive axle kit for the Traxxas electric Stampede 4x4 Slash 4x4 Rustler 4x4 and 2WD SlashFEATURES:- CNC machined #45 hardened carbon steel, S2...

Hot Racing aluminum threaded rear shock bodies for 1/10 Arrma 4X4 Mega and 3S BLX vehicles. See vehicle compatibility in comments below.FEATURES:- Threaded shock bodies for easy, precise, and...

Hot Racing heavy duty splined star drive CVD axle kit for the front or rear of the Traxxas 1/10th scale MaxxFEATURES:- CNC machined #45 hardened carbon steel CVs, drive hub, male slider spline, and...

Hot Racing aluminum shocks for the Axial SCX24, or other mini/micro crawler. These shocks are friction damped, requiring only a partial filling of silicone oil. The include a machined reservoir shock...

FEATURES:- Billet machined aluminum construction, black in color- Replaces stock plastic steering knucklesYOU WILL RECEIVE:- One (1) left and one (1) right steering knuckleREQUIREMENTS:- Installation...

Hot Racing front or rear Heavy Brass hub adapters for Element Enduro vehiclesFEATURES:- CNC machined solid brass billet- Emliminate the the stock hex drive- Adds 75g per hub to the Stock Wheel...

Hot Racing 8 Tooth 0.5 Mod Pinion GearThis gear can only use with Hot Racing SXTF328M05 0.5M spur gear conversion SCX24.FEATURES::Nylon construction with blackened finish for high strength and...

Hot Racing front or rear wheel weights for the stock 1.0in KMC Machete wheels on the Axial SCX24FEATURES:- CNC machined solid brass billet- 9g each fitted to the wheels to lower the vehicles center...

Hot Racing billet aluminum gear dust cover for the Axial SCX24FEATURES:- Gear protection with fantastic looks- Cover is CNC machined billet aluminum, anodized BlackYOU WILL RECEIVE:- One (1) gear...

Hot Racing aluminum servo mount bracket for the Axial SCX10 24FEATURES:- CNC machined billet aluminum, anodized black- Securcre servo mount over stock plastic mount- Stiffer Upper linkage mount-...

Hot Racing aluminum rear chassis brace for the 2018 "V3" Arrma Talion BLX. See vehicle model compatibility in comments below.FEATURES:- CNC machined 6061 aluminum, anodized black- Machined pockets...

Hot Racing 1/10th scale bungee cord kit for realistic scale modelingFEATURES:- Detailed 1/10th scale model replica bungee cords great for holding down your scale parts- Bungee color: black with red...

Hot Racing optional upgrade aluminum link set for 5.25" (133.5mm) wheelbase Axial SCX24 vehicles.Add durability to your SCX24 by upgrading your stock plastic links with the Hot Racing aluminum link...

Blue Hot Racing single arm servo arm for Traxxas TRX-4 FEATURES: CNC Aluminum construction,  Anodized Blue in color one diameter linkage holes YOU WILL RECEIVE: one blue single arm...

Hot Racing machined billet Brass wheels (rims only) for the 1/24 Axial SCX 24FEATURES:- Fits Axial SCX 24 tires only (AXI31567)- CNC machined billet Solid Brass- No Hex Drive design to maximize wheel...

Hot Racing option aluminum skid plate for the Axial SCX 24FEATURES:- CNC machined billet aluminum construction- Black anodizing for durability, corrosion resistance, and great looksYOU WILL RECEIVE:-...

Hot Racing's machined aluminum rear axle housing and Worm Gear cover for the Axial SCX 24 RTR vehiclesFEATURES:- CNC machined billet aluminum axle housing and tubes, anodized black- CNC machined...

Hot Racing's machined aluminum front axle housing and Worm Gear cover for the Axial SCX 24 RTR vehiclesFEATURES:- CNC machined billet aluminum axle housing and tubes, anodized black- CNC machined...

Hot Racing aluminum front bumper mount frame crossmember for the Axial SCX24 vehicles.FEATURES:- Stronger and more rigid than factory plastic cross-member for a more rigid frame and more predictable...

Hot Racing CV rebuild kit for Hot Racing SOFE288 Mini 8ight CV axlesFEATURES:- Steel constructionYOU WILL RECEIVE:- Two (2) steel CVA couplers (barrels)- Two (2) steel CVA cross pins- Two (2) steel...

This is the 14 Tooth Optional Steel Pinion Gear for 5mm shaftFEATURES:CNC Steel Gear then Nitriding to increased wear resistance, improved fatigue life, and enhanced corrosion resistanBlack Aluminum...

This is the 13 Tooth Optional Steel Pinion Gear for 5mm shaftFEATURES:CNC Steel Gear then Nitriding to increased wear resistance, improved fatigue life, and enhanced corrosion resistanred Aluminum...

Hot Racing aluminum servo cable mount (servo wire holder/clip) for the 1/8 Arrma Big Rock BLX, Fazon BLX, and Nero BLX. See vehicle model compatibility in comments below.FEATURES:- CNC machined...

Hot Racing 17mm Splined Hubs aluminum wheel hexes for the front and rear of the 1/10th Traxxas Maxx 4WD vehicles..FEATURES:- 6061 aluminum construction- Blue in color- Fits 1/10th Traxxas Maxx 4WD...

Hot Racing 17mm extra large serrated wheel nuts for the Axial Yeti XL RTR and Arrma 1/10 4X4 4S BLX, Traxxas Maxx 1/10These wheel nuts looks great and will lock the wheels in place with the large hex...

Hot Racing aluminum Rear Lower arms for the Losi 2WD Mini-T2.FEATURES:- Replaces Stock plastic Rear lower arms- CNC machined aluminum, anodized black.- Precision made for perfect bolt-on fitYOU WILL...

Hot Racing factory spec Linear rate rear shock springs for the Losi Mini-T2 vehiclesFEATURES:- Spring steel construction- Maintains spring rates of factory-available upgrade springsYOU WILL RECEIVE:-...

Hot Racing factory spec Linear rate front shock springs for the Losi Mini-T2 vehiclesFEATURES:- Spring steel construction- Maintains spring rates of factory-available upgrade springsYOU WILL...

This is a 4 pack of Shield 3X6x2.5 mm Ball Bearings.Great for Updating Losi MiniT2 steering bellcrankFEATURES:Metal bearing constructionmetal shieldsYOU WILL RECEIVE:Four 3x6 mm ball...

Optional steel 48 pitch 27 tooth pinion gear.FEATURES:4140 heat treated steelColor: BlackYOU WILL RECEIVE:One 48 pitch 27 tooth pinion gear with 4mm set screw.SPECIFICATIONS:Inner diameter: 1/8...

.

Hot Racing Steel Chrome Pivot Ball 3x8x12mm for Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- CNC Harden #45 Steel- Smooth Chrome finishYOU WILL RECEIVE:Four (4) Steel Chrome Pivot Ball...

Hot Racing Steel Chrome Pivot Ball 3x7.8x10.5mm for Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- CNC Harden #45 Steel- Smooth Chrome finishYOU WILL RECEIVE:Four (4) Steel Chrome Pivot Ball 3x7.8x10...

Hot Racing machined aluminum Transmission case Output Gear Cover for the Traxxas TRX-4 vehiclesFEATURES:- CNC machined aluminum construction- Replaces factory plastic Transmission case Gear Box...

Hot Racing S2 hardened spring steel portal drive stub axles for the Traxxas TRX-4FEATURES:- CNC machined S2 hardened spring steel- Upgrades stock axles or provides a replacement for worn or damaged...

Hot Racing heavy duty brass SCX24 Worm gear Axles steering knuckles (steering blocks) for the Axial SCX24 axles. Add weight to your crawler where it needs it - down low. Adds about g (oz) to each...

Hot Racing heavy brass cover for SCX24 Worm gear Axles Adds g of weight to the axle in a low and centralized location to lower the vehicle's center of gravity, increase its stability, and make it an...

Hot Racing aluminum REAR hinge pin brace arm mount on the FRONT LOWER suspension of Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- Eliminates the need for stock plastic and stamp aluminum hinge pin...

This is a package of Foam Body Protectors from Hot RacingAdhesive backed on one side to stick underneath the body.Made of foam to help prevent damage to body post hole.Ideal for 1/10 to 1/16 RC...

Silicone Rubber BODY CLIP RETAINERS 1/10 SCALE (4) purpleFEATURES:Silicone flexible rubber for durabilityRubber grommet for EZ attaches retainer to the bodyshellLarge pull tab allows easy body clip...

Silicone Rubber BODY CLIP RETAINERS 1/8 SCALE (4) BlackFEATURES:Silicone flexible rubber for durabilityRubber grommet for EZ attaches retainer to the bodyshellLarge pull tab allows easy body clip...

Hot Racing optional Aluminum Wing Buttons .FEATURESlarge 20mm diameter buttons are compatible with most screw type wing mounts, providing an incredibly secure hold on your wing and offering...

Hot Racing aluminum front chassis brace for the "V3" and "V4" Arrma Talion BLX. See vehicle model compatibility in comments below.FEATURES:- CNC machined 6061 aluminum, anodized black- Machined...

Hot Racing aluminum FRONT hinge pin brace arm mount on the REAR LOWER suspension of Arrma 1/7 On Road, 1/8 4X4 vehiclesFEATURES:- Eliminates the need for stock plastic hinge pin mount- Secure M4 set...

Hot Racing aluminum cross-drilled slipper pad for 1/10 Arrma 4X4 vehicles. See requirements and comments below for specific vehicle fit information. FEATURES:- Cross-drilled aluminum...

Hot Racing aluminum differential spool (locker) hub for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, Typhon BLX and 1/7 Limitless Infraction, Fits the front, center,...

Hot Racing aluminum rear bumper mount for Axial SCX10 II vehicles FEATURES: - One-piece CNC machined 6061 aluminum construction - Black anodized finish - Secondary-processed machined...

Hot Racing replacement 6mm steel input coupler for the Hot Racing ERVT288RCFEATURES- CNC machined #45 steel constructionINCLUDES- One (1) couplerSPECIFICATIONS:- Overall length: 17.2 mm- diamemter...

Hot Racing's machined aluminum Counter Balance Output transfer case for the Axial SCX10 II Kit vehicles (not RTR)FEATURES:- This is for a heavy weight crawler that need a counter balance output to...

This is the optional Hot Racing Rear Bumper with Tow Hook in Black for the Axial SCX-10 2FEATURES:Billet CNC machined aluminum construction, black in colorOne CNC Aluminum tow hook with Steel BallTwo...

Hot Racing 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES:- CNC machined hardened steel construction- Black oxide finished-...

Hot Racing heavy duty aluminum hub nuts (pillow block bushings) with Delrin pivot ball cups for the 1/8 Arrma Kraton BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX FEATURES: - CNC...

Hot Racing aluminum FRONT hinge pin brace arm mount on the FRONT LOWER suspension of Arrma 1/8 4X4 vehiclesFEATURES:- Eliminates the need for stock hinge pin mount- CNC machined 6061 aluminum...

Here is the 200mm High Flex Sensor Wire from Hot Racing FEATURES: Extra flexible Makes installation and USAge in any R/C vehicle smoother and easier YOU WILL RECEIVE: One 200mm...

Hot Racing Aluminum Gearbox Case Bulkhead Cover for the front or rear of the 1/8 BLX Arrma Kraton, Outcast, Senton, Talion, and Typhon. See vehicle model compatibility in comments below...

Hot Racing 54 tooth hardened steel Modulus 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, and XO-1.FEATURES:- CNC machined hardened steel construction- Black oxide...

Hot Racing aluminum front bumper with LED light buckets, winch mounting pattern, and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper,...

This is a Replacement HD #45 Steel half shaft, dog bone, Driveshaft, for Hot Racing STRF288R FEATURES: #45 Steel construction Can be used to replace a bent or damaged driveshaft YOU WILL...

This is a Replacement HD #45 Steel half shaft, dog bone, Driveshaft, for Hot Racing STRF288F FEATURES: #45 Steel construction Can be used to replace a bent or damaged driveshaft YOU WILL...

Hot Racing set of CNC machined billet aluminum 1.9 beadlock wheels in Hot Racing's B-Style pattern FEATURES: - CNC machined 6061-T6 aluminum construction - Anodized black with secondary process...

Hot Racing machined billet aluminum 1.9 beadlock wheels (rims only) for the 1/18 Losi Mini-Rock Crawler 1.9 tires, or similar FEATURES: - True beadlock design, no gluing required - Fits Losi...

chrome steel ball end for Hot Racing TAET160 (use Allen wrench, 1.5mm That is not included)

1/10th scale bungee cord kit for realistic scale modeling FEATURES: - Detailed 1/10th scale model replica bungee cords customizable to any length - Bungee color: black with gold...

This is the optional Hot Racing stainless Steel armor skid plate is the ultimate protection from any rock strikes.  For the front or rearof Traxxas TRX4 FEATURES: Formed from a single...

This is the optional Hot Racing stainless Steel Center armor skid plate is the ultimate protection from any rock strikes.  For the center of Traxxas TRX4 FEATURES: Formed from a...

Hot Racing aluminum center differential mount for the Arrma Kraton BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX. See vehicle model compatibility in comments below.  FEATURES: -...

Hot Racing aluminum sealed differential case with Hardened steel cog differential gear for the 2WD Traxxas Stampede, Rustler, Bandit, 2WD Slash, and Monster Jam vehiclesFEATURES:- CNC machined...

Aluminum front bumper with stinger, LED light buckets, winch mounting pattern, and tow shackles for the Traxxas TRX-4 or Axial SCX10 II FEATURES: - CNC machined billet aluminum bumper, anodized...

.

Hot Racing optional hop-up ICE Cube Style rock rail side step for the Traxxas TRX-4 FEATURES: - CNC Billet machined aluminum construction - Anodized black with aluminum ICE Cube Style on...

Hot Racing aluminum Grille Guard for TRXF03CF01 with LED light buckets, for the Traxxas TRX-4  FEATURES: - CNC machined billet aluminum bumper, anodized semi-flat black - Pre-drilled mm...

Hot Racing Rear S2 Spring Steel axle shafts for the TRX4 Rear Portal axle  FEATURES: - CNC Hardened S2 steel construction Axle - Replaces worn or damaged axle shafts and gear YOU WILL...

Hot Racing aluminum front bumper with LED light buckets, winch mounting pattern, and tow shackles for the Axial SCX10 Dingo, Jeep, and Honcho FEATURES: - CNC machined billet aluminum bumper,...

Miniature scale hex bolts from Hot Racing. FEATURES: Steel construction. Silver in color. Hex bolts head . YOU WILL RECEIVE: Ten M2.5 x 10 millimeter miniature scale hex REQUIREMENTS: 2.5...

Hot Racing aluminum short rear chassis brace for the Arrma Outcast BLX, Senton BLX, and Typhon BLX, FEATURES: - CNC machined 6061 aluminum - Red anodized - Machined pockets and...

Hot Racing aluminum front chassis brace for the Arrma Kraton BLX, Outcast BLX, Senton BLX, Talion BLX, and Typhon BLX FEATURES: - CNC machined 6061 aluminum - Black anodized - Machined...

This is a quantity of six Hot Racing Factory Spec Rear Spring Sets for shocks on the Axial Yeti XL.     FEATURES Cold coiled steel...

This is the the optional Hot-Racing Differential Spool Gear for 1/10 Tamiya Clod Buster and Super Clodbuster.     FEATURES CNC...

These are the Hot-Racing 1/10 scale Tow Shackle D Rings in Red.     FEATURES Aluminum hook airbrushed red in color CNC machined black...

Hot Racing optional upgrade heavy duty spline star drive axle kit for SCX II and TRX4 FEATURES: - CNC machined #45 hardened carbon steel and Aluminum construction - Replaces...

Hot Racing aluminum differential carrier (case) for the 1/8 Arrma Kraton BLX, Notorious BLX, Outcast BLX, Senton BLX, Talion BLX, Typhon BLX and 1/7 Limitless Infraction, Fits the front, center,...

Stainless Skid Plate Bumper: - Axial SMT Ultimate in front protection from damage from any rock strikes. FEATURES: formed from a single piece of 0.6mm stainless steel plate. it fit...

1/10 scale winch CNC Aluminum Winch Flat link for decorating your radio controlled model FEATURES: Realistic 1/10 scale winch CNC Aluminum Winch Flat link YOU WILL RECEIVE: One 1/10...

1/10 scale winch CNC Aluminum Winch Flat link for decorating your radio controlled model FEATURES: Realistic 1/10 scale winch CNC Aluminum Winch Flat link YOU WILL RECEIVE: One 1/10...

1/10 scale winch hook (chrome) die-cast for decorating your radio controlled model FEATURES: Realistic winch 1/10 scale hook (chrome). Heavy die-cast metal with pin lock YOU WILL RECEIVE:...

1/10 scale winch CNC Aluminum Winch Flat link for decorating your radio controlled model FEATURES: Realistic 1/10 scale winch CNC Aluminum Winch Flat link YOU WILL RECEIVE: One 1/10...

Hot Racing aluminum wheel nut caps with M4 wheel nuts for many 1/10 scale vehicles. Aluminum caps feature an attractive taper with a flat head design. FEATURES: - CNC machined from solid...

Hot Racing aluminum wheel nut caps with M4 wheel nuts for many 1/10 scale vehicles. Aluminum caps feature an attractive taper with a flat head design. FEATURES: - CNC machined from solid...

Hot Racing aluminum wheel nut caps with M4 wheel nuts for many 1/10 scale vehicles. Aluminum caps feature an attractive taper with a mushroom head design. FEATURES: - CNC machined from...