Integy

Add some flashy looks to your ride and upgrade performance and durability at the same time with our Alloy upgrades. Every one of our alloy parts is precision made and anodized in multiple...

If you need something stronger than your standard plastic servo horn, upgrade your Traxxas TRX-4 with our Alloy Adjustable Length Steering Servo Horn. Available with a 25-tooth spline (to bolt right...

Keep your Arrma 1/10 Granite 4X4 3S BLX from flipping on its lid with our Machined Wheelie Bar. This is designed as a bolt-on replacement for Arrma OEM part #AR320403, and features an alloy main...

Keep your Arrma 1/10 Granite 4X4 3S BLX from flipping on its lid with our Machined Wheelie Bar. This is designed as a bolt-on replacement for Arrma OEM part #AR320403, and features an alloy main...

Strengthen your 1/10-scale Axial SCX10 II by swapping out the stock gearbox housing for our Billet Machined Alloy Gearbox Housing w/LCG Transfer Case. Simply swap in your stock internals for an easy,...

Add more flash or that final touch to your custom Axial 1/10-scale SCX10-II by installing our new Billet Machined Alloy Differential Cover. This alloy cover features an aftermarket-looking design...

.

.

.

.

These are the Integy 17mm 0 Offset Wheel Hexes for the 1/10 scale Traxxas T-Maxx, Revo and Summit. FEATURES Billet machined aluminum construction,...

(Maximum load rating @7.4VDC = 9-lbs. direct power/8-lbs. w/remote control) NOTE: RC winches are designed to pull, not lift - meaning pulling a vehicle that is rolling freely, as opposed to...

This is the Team Integy EC3 Skidproof 3.5 Connector Set.     FEATURES Blue plastic housing with two each 3.5mm diameter male and...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined,...

his is the Team Integy 6-Piece Progrip Hex Wrench Set.FEATURES: Aluminum handles are knurled for sure grip          Set screw can be loosened to replace...

.

FEATURES: Alloy construction, blue in color Steel ball end anchors INCLUDES: Front and Rear Shock Towers

.

Add some color and strength to your Redcat 1/10 TR-MT10E with our Billet Machined Spur Gear Hub. This hub is a direct bolt-on that replaces Team Redcat OEM part #510109. The Billet Machined Spur Gear...

.

.

.

.

.

.

.

.

.

.

.

.

.

.

Never lose a small screw or e-clip again when working on your RC vehicles! Our magnetic parts storage tray keeps those small items from rolling off the table and into carpet. Available in multiple...

.

.

.

.

.

.

This is the Integy G.T. Power 8 LED Light Kit for Airplanes and Helicopters. FEATURES Operates from an individual battery pack or receiver...

.

Keep your temperatures in check and your motor running efficient and cool with our heatsink and cooling fan combos. The motor heatsink clips right onto your RC vehicle's motor, and features multiple...

For our Traxxas 1/10 TRX-4 owners, bring your rig's center of gravity lower with our Billet Machined Counterweights. The counterweight bracket bolts onto your Portal axle housings to help keep the...

This is the Team Integy Professional 23mm Hex Socket Wrench. FEATURES For 23mm wheel nuts used on 1/8 scale RC vehicles Aluminum construction, gun...

This is the Integy G.T. Power 8 LED Light Kit for Airplanes and Helicopters. FEATURES Operates from an individual battery pack or receiver...

This is the Team Integy Motor Heatsink with side mount cooling fan.                 This heatsink snaps onto the motor...

With our Billet Machined 25T Servo Arm you can add some eye catching color and strength to your Arrma 1/8 Kraton 6S BLX. Our Billet Machined 25T Servo Arm replaces Arrma OEM part #AR340061, and is...

With our Billet Machined 25T Servo Arm you can add some eye catching color and strength to your Arrma 1/8 Kraton 6S BLX. Our Billet Machined 25T Servo Arm replaces Arrma OEM part #AR340061, and is...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

Add some heavy duty strength to your Arrma 1/8 Kraton 6S BLX by upgrading your stock pinion gear with our Billet Machined Pinion Gears. Sold individually, the pinion gears are precision machined for...

.

Add a flash of color to your 1/8 Arrma Kraton or Outcast 6S BLX installing our Billet Machined RF Suspension Mount. This mount is made from aluminum alloy, and is a direct replacement for Arrma OEM...

Add a flash of color to your 1/8 Arrma Kraton or Outcast 6S BLX installing our Billet Machined FF Suspension Mount. This mount is made from aluminum alloy, and is a direct replacements for Arrma OEM...

.

.

.

.

.

Traxxas 1/10 Rustler 4X4 drivers can add some good looks and more performance with our new Billet Machined Rear Hub Carriers. The alloy rear carriers easily bolt in place of your factory plastic...

Swap out your stock molded plastic rear shock mounts on your Traxxas 1/10 Rustler 4X4 with our new Billet Machined Alloy Rear Shock Tower. Our rear shock towers feature multiple shock mounting...

Swap out your stock molded plastic rear shock mounts on your Traxxas 1/10 Rustler 4X4 with our new Billet Machined Alloy Rear Shock Tower. Our rear shock towers feature multiple shock mounting...

Upgrade your Traxxas 1/10 E-Revo 2.0 (2018+) with our Billet Machined Alloy Universal Drive Shafts. The drive shafts feature a sliding design with heavy duty universal joints and anodized alloy...

Upgrade your Traxxas 1/10 E-Revo 2.0 (2018+) with our Billet Machined Alloy Universal Drive Shafts. The drive shafts feature a sliding design with heavy duty universal joints and anodized alloy...

Add some color and strength to your Traxxas 1/10 E-REVO 2.0 with our new Billet Machined Rear Lower Suspension Arm Set. These arms are sold in pairs, and feature a reinforced design combined with...

Add some color and strength to your Traxxas 1/10 E-REVO 2.0 with our new Billet Machined Rear Lower Suspension Arm Set. These arms are sold in pairs, and feature a reinforced design combined with...

Add some color and strength to your Traxxas 1/10 E-REVO 2.0 with our new Billet Machined Rear Lower Suspension Arm Set. These arms are sold in pairs, and feature a reinforced design combined with...

Add some color and strength to your Traxxas 1/10 E-REVO 2.0 with our new Billet Machined Front Lower Suspension Arm Set. These arms are sold in pairs, and feature a reinforced design combined with...

Add some color and strength to your Traxxas 1/10 E-Revo 2.0 with our new Billet Machined Front Upper Suspension Arms. Our suspension arms feature a sleek design with suspension shaft inserts. The...

Add some color and strength to your Traxxas 1/10 E-Revo 2.0 with our new Billet Machined Rear Upper Suspension Arms. Our suspension arms feature a sleek design with suspension shaft inserts. The...

Add some color and strength to your Traxxas 1/10 E-Revo 2.0 with our new Billet Machined Rear Upper Suspension Arms. Our suspension arms feature a sleek design with suspension shaft inserts. The...

Add some color and strength to your Traxxas 1/10 E-Revo 2.0 with our new Billet Machined Rear Upper Suspension Arms. Our suspension arms feature a sleek design with suspension shaft inserts. The...

Add some flashy looks to your Traxxas 1/10-scale E-REVO 2.0 (2018+) and upgrade performance and durability at the same time with our Billet Machined Motor Plate w/Heatsink. Our heatsink is a bolt-on...

Add some flashy looks to your Traxxas 1/10-scale E-REVO 2.0 (2018+) and upgrade performance and durability at the same time with our Billet Machined Motor Plate w/Heatsink. Our heatsink is a bolt-on...

Get your Traxxas 1/10-scale E-REVO 2.0 (2018+) body sitting exactly how you want it by installing our Billet Machined Rear Clipless Body Post. Made from aluminum alloy, our body post replaces the...

Get your Traxxas 1/10-scale E-REVO 2.0 (2018+) body sitting exactly how you want it by installing our Billet Machined Rear Clipless Body Post. Made from aluminum alloy, our body post replaces the...

Get your Traxxas 1/10-scale E-REVO 2.0 (2018+) body sitting exactly how you want it by installing our Billet Machined Front Clipless Body Post. Made from aluminum alloy, our body post replaces the...

Get your Traxxas 1/10-scale E-REVO 2.0 (2018+) body sitting exactly how you want it by installing our Billet Machined Front Clipless Body Post. Made from aluminum alloy, our body post replaces the...

Get your Traxxas 1/10-scale E-REVO 2.0 (2018+) body sitting exactly how you want it by installing our Billet Machined Front Clipless Body Post. Made from aluminum alloy, our body post replaces the...

This is the optional Team Integy Alloy Gear Box for use on...

This is the optional Team Integy Alloy Gear Box for use on...

This is the optional Team Integy Alloy Gear Box for use on...

Add more flash or that final touch to your custom Axial 1/10-scale SCX10 II                    ( #90046-47) by installing our new Billet Machined...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined,...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined,...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined,...

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined,...

FEATURES: Billet machined aluminum construction, silver in color Replaces stock plastic steering knuckles INCLUDES: Two Steering Knuckles REQUIRES: Four 5x11mm Ball Bearings

Add some flashy looks to your ride and upgrade performance and durability at the same time with our alloy or carbon fiber upgrades. Most of our alloy or graphite hopup parts are precision machined,...

FEATURES: Constructed of machined billet steel INCLUDES: 0.8 32 Pitch 18 Tooth Pinion Gear with Set Screw

Upgrade your Traxxas TRX-4's stock plastic servo horns with our Billet Machined Alloy Lockout Servo Horns. Installed onto your lockout servos, our servo horns are a two-piece style that are available...

Upgrade your Traxxas TRX-4's stock plastic servo horns with our Billet Machined Alloy Lockout Servo Horns. Installed onto your lockout servos, our servo horns are a two-piece style that are available...

Upgrade your Traxxas TRX-4's stock plastic servo horns with our Billet Machined Alloy Lockout Servo Horns. Installed onto your lockout servos, our servo horns are a two-piece style that are available...

Upgrade your Traxxas TRX-4's stock plastic servo horns with our Billet Machined Alloy Lockout Servo Horns. Installed onto your lockout servos, our servo horns are a two-piece style that are available...

Upgrade your Traxxas TRX-4's stock plastic servo horns with our Billet Machined Alloy Lockout Servo Horns. Installed onto your lockout servos, our servo horns are a two-piece style that are available...