RC LIGHTS

Overview Use your heat gun (HJ5000 or similar) and this waterproof heat shrink kit to make any LED installation resistant to water, dirt, mud, grease, and fuel for any 5mm or 3mm LED. Includes...

Overview Use with zip ties to keep wires neatly tied away for that clean looking installation. Use to mount LED controllers & LED connectors. Includes: (100) Zip Tie Bases Zip Ties...

Overview Use with zip tie bases to keep wires neatly tied away for that clean looking installation. Use to mount LED controllers & LED connectors. Includes: (100) 4" zip ties

Overview Direct replacement LED holder for any 3mm LED. Includes: (6) standard 3mm LED holders Specs: MOUNTING HOLE SIZE: 3/16" OR Use a body reamer to little-by-little make each hole...

Overview Direct replacement LED holder for any 5mm LED. Includes: (6) standard 5mm LED holders Specs: MOUNTING HOLE SIZE: 1/4" OR Use a body reamer to little-by-little make each hole...

Overview Use these optional 3mm LED holders to install LEDs with a touch of chrome. Nice & shiny overall finish! Includes: (1) 3.75"x3" aluminum tape (2) chrome 3mm LED holders (2)...

Overview Use these optional 5mm LED holders to install LEDs with a touch of chrome. Nice & shiny overall finish! Includes: (1) 3.75"x3" aluminum tape (2) chrome 5mm LED holders (2)...

Overview Use zip ties, zip tie bases, and aluminum tape to keep wires neatly tied away for that clean looking installation. Use zip ties & bases to mount LED controllers & LED connectors...

Key Features Standard power source included with full-feature systems Use for both 1 and 2 channel installations Power systems directly from your RX...

Key Features Continuously powers up to 3 LEDs Power Source + LED Controller combo Overview The central point of every LED lighting system is the LED controller. It is this...

Key Features A micro sized Y-harness If no extra channels are available on your RX use with RX Plug to power systems Use to extend receiver channel outside radio...

Key Features Standard power source included with most complete systems Power systems directly from your RX (receiver) Overview This is the power source included with most...

Key Features Powers systems with a 9V battery Overview Use this optional power source to power using a 9V battery. Wiring harness features voltage reducing circuitry that lowers the...

Key Features 24+ hour run times on 10 LED lighting systems Built-in ON-OFF power switch Overview Use this optional power source when the longest possible LED run-times...

Key Features Power multiple systems from the same power source Overview Use this power source to connect multiple LED controllers together using the LINK or PWR channels. Doing this...

Overview Directly power up to 14 LEDs. Current limiting resistors are built right in. Using the NIGHTFLY2 14 LED Controller, LEDs can be directly powered from the RX or an additional power...

Overview Directly power up to 14 LEDs. Current limiting resistors are built right in. Using the NIGHTFLY 14 LED Controller, LEDs can be directly powered from the RX or an additional power...

Overview Directly power up to 14 LEDs. Current limiting resistors are built right in. Using the 911STROBE 14 LED Controller, LEDs can be directly powered from the throttle channel of the RX...

roduct Description Key Features Full-function LED controller with headlight strobe, turn signal, and dual-intensity electronic brake light action built right in Power directly from the RX or...

Overview Directly power up to 14 LEDs. Current limiting resistors are built right in. Using the DELUXBRAKE 14 LED Controller, LEDs can be directly powered from the throttle channel of the RX...