Robinson Racing

Robinson Racing Forward Only Standard Ratio Gear Kit for the Traxxas T-Maxx 3.3 and Revo 3.3.

FEATURES Hardened steel construction for long life Blackened finish for less friction resulting in better mating surfaces and smoother running gears INCLUDES ...

This is the Extra Hard 5mm .8 Module 22 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra hard steel constructionFits Novak motors with 5mm diameter shaftsWill also work on...

This is the Extra Hard 5mm .8 Module 21 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with shaft diameter of 5mmWill also...

This is the Extra Hard 5mm .8 Module 20 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with shaft diameter of 5mmWill also...

This is the Extra Hard 5mm .8 Module 13 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with shaft diameter of 5mmWill also...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 26...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 18...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 12...

Robinson Gen3 High Performance Slipper Unit for                       the Traxxas Revo 3...

This is the Robinson Racing Products 17 Tooth Clutch Bell for the HPI Savage vehicles with the .21 and .25 size engine. FEATURES: Constructed of hardened steel INCLUDES: One Robinson Racing...

This is the Hard Aluminum 64P 52T Pinion Gear from Robinson Racing. FEATURES: Aluminum construction52 Tooth64 Pitch INCLUDES: 64P 52T Pinion Gear3x3mm Set Screw REQUIRES: Installation on the Motor...

This is the Hard Aluminum 64P 51T Pinion Gear from Robinson Racing. FEATURES: Aluminum construction51 Tooth64 Pitch INCLUDES: 64P 51T Pinion Gear3x3mm Set Screw REQUIRES: Installation on the Motor...

This is the optional Robinson Racing Hardened Steel 32P 54T Spur Gear for use on the Associated SC10. FEATURES: Hardened steel construction INCLUDES: One 32P 54T Spur Gear REQUIRES: Installation on...

This is the Robinson Racing Idler Gear for the Team Associated RC10B5 Team Buggy Kit. FEATURES Hardened steel...

This is the Robinson Racing Hardened 45 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 43 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 28 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 26 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 25 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 24 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 20 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 18 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 17 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Absolute 32 pitch hardended pinion gear. FEATURES: Steel constructionTooth count pressed into the base of the pinionHardened INCLUDES: One Absolute 21t pinion and set...

This is the Robinson Absolute 32 pitch hardended pinion gear. FEATURES: Steel constructionTooth count pressed into the base of the pinionHardened INCLUDES: One Absolute 20t pinion and set...

This is the Robinson Absolute 32 pitch hardended pinion gear. FEATURES: Steel constructionTooth count pressed into the base of the pinionHardened INCLUDES: One Absolute 16t pinion REQUIRES: 1...

This is the Robinson Absolute 32 pitch hardended pinion gear. FEATURES: Steel constructionTooth count pressed into the base of the pinionHardened INCLUDES: One Absolute 15t pinion and set...

.

This is the optional Robinson Racing 80T Gen3 Slipper Unit for the Axial Wraith Rock Racer. FEATURES: Captured design prevents slipper pad blowout and delivers maximum power to the...

This is the Hard Aluminum 48P 45T Pro Pinion Gear from Robinson Racing. FEATURES: Hard Aluminum ConstructionBlack in Color45 Tooth48 Pitch INCLUDES: One 48P 45T Pinion GearOne 3x3mm Set...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

This is an Extra Hard 5mm 24 Tooth Pitch Pinion Gear from Robinson Racing for brushless motors with a 5mm shaft.This is the gear that attaches directly to the motor shaft. FEATURES: Steel...

This is an Extra Hard 5mm 23 Tooth Pitch Pinion Gear from Robinson Racing for brushless motors with a 5mm shaft.This is the gear that attaches directly to the motor shaft. FEATURES: Steel...

This is an Extra Hard 5mm 21 Tooth Pitch Pinion Gear from Robinson Racing for brushless motors with a 5mm shaft.This is the gear that attaches directly to the motor shaft. FEATURES: Steel...

This is the optional Robinson Racing 19 Tooth Pinion Gear for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3. FEATURES: Extra hardened steel construction for durabilityPrecision madeFor use in...

These are .6 mod pinion gears. These are used on cars such as the Tamiyatouring cars(this works on the TA01 and the TA02, but NOT on the TA03). Theyalso work on some other Tamiya cars, and on the...

This is the 48 pitch 40 tooth Hard Nickel Plated Pinion Gear from Robinsion Racing Products. FEATURES: Hard nickel plated alloy steel constructionFits motors with 1/8" diameter output shaft INCLUDES:...

This is a 48 pitch pinion gear made out of an alloy steel material. Availablein sizes from 12 to 35 teeth choose the number that will work best for you.

This is a 48 pitch pinion gear made out of an alloy steel material. Availablein sizes from 12 to 35 teeth choose the number that will work best for you.

Robinson's standard alloy 32 pitch pinion gears are a great replacment for most Kyosho cars and any cars that are 32 pitch. They are available in sizes from 9 to 22 tooth.

Robinson's standard alloy 32 pitch pinion gears are a great replacment for most Kyosho cars and any cars that are 32 pitch. They are available in sizes from 9 to 22 tooth.

This is the optional Robinson Racing One-Piece Diff Locker Gear for the Axial Wraith. FEATURES: Precision machined hardened steel construction INCLUDES: One-Piece Diff Locker Gear

PREMIUM HEAT TREATED "ABSOLUTE" STEEL PINION Super hard, heat treated, "Absolute" pinion gears are a must for using with our steel spur gears and will last and last if used with plastic spur gears...

Optional Robinson Racing Steel Idler Gear                    for the Traxxas 1/10 scale Slash 2WD...

This is a Robinson Racing Extra Stable Front/Rear Stabilizer Plate for the Axial SCX10 and SMT10.

.

Optional Robison Racing Hardened Steel 1.0 Mod 48T Spur Gear       for use on the HPI 1/8 Savage X 4.6 RTR Nitro TruckFEATURES: Hardened steel constructionINCLUDES: One...

This is the optional Robinson Racing 45T Spur Gear for the 1/10 scale Traxxas Slash and Stampede 4x4. FEATURES Machined hardened...

This is the Robinson Racing Hardened 29 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Absolute 32 pitch hardended pinion gear. FEATURES: Steel constructionTooth count pressed into the base of the pinionHardened INCLUDES: One Absolute 10t pinion and set...

These are the 4x4mm Set Screws from Robinson Racing. FEATURES: Metal construction, black in color INCLUDES: Five 4 x4mm screws REQUIRES: Installation to the model

This is a 48 pitch pinion gear made out of an alloy steel material. Availablein sizes from 12 to 35 teeth choose the number that will work best for you.

This is an optional 65T Steel Spur Gear / Slipper Pad / Backplate / Bearing for the Traxxas E-Revo with Mamba system from Robinson Racing. FEATURES: Steel constructionSilver in...

This is an Extra Hard 5mm 25 Tooth Pitch Pinion Gear from Robinson Racing for brushless motors with a 5mm shaft.This is the gear that attaches directly to the motor shaft. FEATURES: Steel...

Optional Robinson Racing Hardened One Piece        Diff Locker Gear for use on the Axial AX10 Scorpion Vehicles.FEATURES: Hardened steel constructionINCLUDES: One...

.

This is the Robinsion Racing H/D Competition Hard Output Gear for the Axial SCX10 Rock Crawler. FEATURES Hardened steel...

This is the Extra Hard 5mm .8 Module 25 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with 5mm shaftsWill also work on stock...

This is the Extra Hard 5mm .8 Module 18 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with shaft diameter of 5mmWill also work on...

This is the Extra Hard 5mm .8 Module 16 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with shaft diameter of 5mmWill also...

This is the Extra Hard 5mm .8 Module 15 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with shaft diameter of 5mmWill also...

This is the Extra Hard 5mm .8 Module 14 Tooth Brushless Motor Pinion Gear from Robinson Racing. FEATURES: Extra Hard Construction, gun in colorFits motors with 5mm shaft diameterWill also work...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 25...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 24...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 21...

FEATURES Extra hard high carbon construction For use with the Robinson Racing GEN3 steel slipper units Fits 5mm motor shaft INCLUDES 20...

FEATURES Machined hardened steel with a blackened finish that improves lubricity and anti-galling (metal failure from friction) Accepts...

Robison Racing Hardened Steel 1.0 Mod 46T Spur Gear       for use on the HPI 1/8 Savage X 4.6 RTR Nitro TruckFEATURES: Hardened steel constructionINCLUDES: One 46T 1.0...

This is the Hard Aluminum 64P 53T Pinion Gear from Robinson Racing. FEATURES: Hard Aluminum ConstructionBlack in Color53 Tooth64 Pitch INCLUDES: One 64P 53T Pinion GearOne 3x3mm Set Screw REQUIRES:...

Robinson's Aluminum Pro pinions feature lightweight aluminum construction withan added hard coating that produces extra strenght and less friction. Thesepinions also feature a hollowed out core that...

The "Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize coating. Recommended for on road, but they can be run off road. A...

The "Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize coating. Recommended for on road, but they can be run off road. A...

The "Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize coating. Recommended for on road, but they can be run off road. A...

The "Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize coating. Recommended for on road, but they can be run off road. A...

The "Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize coating. Recommended for on road, but they can be run off road. A...

The "Pro" Pinions are precision machined from aircraft grade aluminum, lightened and coated twice with a super hard, black anodize coating. Recommended for on road, but they can be run off road. A...

This is the Robinson Racing Hardened 27 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 23 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 21 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

This is the Robinson Racing Hardened 19 Tooth 48 Pitch Pinion Gear. FEATURES: Constructed of hardened machined steelMay be used on motors with a 5mm shaft including Traxxas, Associatedand HPI...

Robinson's Super Machined Spurs are half the thickness of standard spurs, for less friction and a lower rotating mass, and that means better acceleration and top speed!

.

All gears are precision machined and hardened for the ultimate in reliability and performance. Includes: 1 X Axial Wraith Hardened Steel Idler Gear

This is the optional Robinson Racing Hardened Steel Idler Gear for use on the Axial AX10 Rock Crawler. FEATURES: Hardened steel construction INCLUDES: One Hardened Steel Idler Gear REQUIRES:...

This is a 48 Pitch 27 Tooth Pinion Gear. FEATURES: Grey hardened steel construction INCLUDES: One pinion gear with set screw REQUIRES: Installing on the motor SPECS: Length: 8.6mm

This is a 48 Pitch 26 Tooth Pinion Gear. FEATURES: Grey hardened steel construction INCLUDES: One pinion gear with set screw REQUIRES: Installing on the motor SPECS: Length: 8.6mm

This is a 48 Pitch 22 Tooth Pinion Gear. FEATURES: Grey hardened steel construction INCLUDES: One pinion gear with set screw REQUIRES: Installing on the motor SPECS: Length: 8.6mm

This is a 48 Pitch 21 Tooth Pinion Gear, FEATURES: Grey hardened steel construction INCLUDES: One pinion gear with set screw REQUIRES: Installing on the motor SPECS: Length: 8.6mm

This is a 48 Pitch 20 Tooth Pinion Gear. FEATURES: Grey hardened steel construction INCLUDES: One pinion gear with set screw REQUIRES: Installing on the motor SPECS: Length: 8.6mm

This is a 48 Pitch 18 Tooth Pinion Gear. FEATURES: Grey hardened steel construction. INCLUDES: One pinion gear with set screw REQUIRES: Installing on the motor SPECS: Length: 8.6mm

This is the Hard Aluminum 48P 40T Pro Pinion Gear from Robinson Racing. FEATURES: Hard aluminum construction, black in color INCLUDES: 48P 40T Pinion Gear with 3x3mm Set Screw REQUIRES: Installation...

This is the Hard Aluminum 48P 39T Pro Pinion Gear from Robinson Racing. FEATURES: Hard Aluminum ConstructionBlack in Color39 Tooth48 Pitch INCLUDES: One 48P 39T Pinion GearOne 3x3mm Set...

This is the Hard Aluminum 48P 36T Pro Pinion Gear from Robinson Racing. FEATURES: Hard aluminum construction, black in color INCLUDES: 48P 36T Pinion Gear with 3x3mm Set Screw REQUIRES: Installation...