Tekno RC

FEATURES: Hard anodized aluminum construction INCLUDES: Four Aluminum Spindle Bushings

FEATURES: Stock front shock springs for the Tekno RC EB48 buggy, optional for the SCT410 short course truck Steel construction, black in color Yellow firmness rating INCLUDES: Two 1.5 x 8.0T, 70mm...

FEATURES: Metal and rubber construction INCLUDES: One outdrive Two O-rings One setscrew

.

Product DescriptionAfter thorough testing, we are proud to release the new EB410 Composite Differential Gear Set. This differential gear set reduces rotating mass as well as the overall weight...

.

.

TKR5263 – Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL)This is an inexpensive way to put a split center diff mount on your EB/ET/SCT/SL vehicle.  These composite parts come...

FEATURES: Aluminum construction for light weight Anchors sway bar and shock ends in place INCLUDES: Four 6.8mm Aluminum Unflanged Pivot Balls

TKRBB06135 – Ball Bearings (6x13x5mm, 4pcs)SCT410.3 and EB48SL bearings for outside of steering blocks and outside of rear hub carriers. 4pcs required in kit.

TKR6732 – Shock Pistons (CNC, 2×1.8, flat/flat, 13mm, 2pcs)With these optional pistons, it is now easier than ever to fine-tune suspension characteristics based on your needs. Made from...

TKR6731 – Shock Pistons (CNC, 2×1.7, flat/flat, 13mm, 2pcs)With these optional pistons, it is now easier than ever to fine-tune suspension characteristics based on your needs. Made from...

.

.

TKR6117 – LF Shock Spring Set (rear, 1.5×11.0, 2.98lb/in, 70mm, red)Our new low-frequency (LF) spring design improves traction by reducing chassis oscillation on rough track surfaces and large jump...

TKR6116 – LF Shock Spring Set (rear, 1.5×11.75, 2.75lb/in, 70mm, orange)Our new low-frequency (LF) spring design improves traction by reducing chassis oscillation on rough track surfaces and large...

TKR6114 – LF Shock Spring Set (rear, 1.5×13.0, 2.44lb/in, 70mm, green)Our new low-frequency (LF) spring design improves traction by reducing chassis oscillation on rough track surfaces and large jump...

.

.

.

.

.

.

.

  FEATURES: Black anodized aluminum construction Used with the M4x15mm Flat Head Screws, TKRC1346 to secure the motor mounts on the EB48 and SCT410 vehicles INCLUDES: Ten M4 Countersunk Washers

TKR8073 – CV Rebuild kit (f/r, for 2 axles)CV Rebuild kit used with the new .4 CVA drive shafts.The .4 CVA’s have been redesigned with an oversized ball joint to reduce wear, resulting in improved...

.

.

.

.

.

.

FEATURES: Made of black plastic and steel INCLUDES: One differential case SPECS: Diameter: 28mm (1-1/8") Length: 25mm (1") Mounting hole, center to center of diff: 11.5mm (7/16") diameter: 3.0mm...

.

.

.

.

.

TKR5357 – Steering Servo Turnbuckle (NB48, NT48)TKR5357 has M3 threading on the ends, is 40mm long, and can be used with TKR1103 (4mm) for easy adjustability.

This is the 2.9mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to...

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

TKR5407 – Chassis (7075, 4mm, hard anodized, lightened, NT48.3)This is the stock chassis for the NT48.3.  It is also a direct replacement for the original NT48 chassis.  The rear engine...

Product DescriptionTKR6608X – Body (0.5mm, lightweight, EB410)The lightweight body is 16 grams lighter than the standard EB410 body, lowering the center of gravity and improving handling...

This is the optional Tekno RC Big Bone Center Driveshaft and Outdrives for the Traxxas Stampede 4x4. FEATURES Driveshaft machined from...

.

.

This is an optional Tekno R/C Front M6 Driveshaft Kit for the Traxxas Slash 4x4. FEATURES: Nylon and hardened steel construction Black in color INCLUDES: Two nylon steering blocks Two hardened...

.

FEATURES: Ideal for 1/8 scale and other MOD1 pinion applications Constructed of CNC machined steel, lightened and hardened for durability Number of teeth laser etched on shaft INCLUDES: 23 Tooth...

Optional 12mm Hex Adapters from Tekno                    for use on the Traxxas Slash 4X4.FEATURES:...

FEATURES: Metal construction INCLUDES: One center driveshaft Two differing outdrives Four rubber O-rings One setscrew on pin One setscrew Tekno decal

FEATURES: Fiberglass construction INCLUDES: Two Brake Discs

These are the Rear Arm Mud Guards for the Tekno RC EB48SL Buggy, and the SCT410.3 4x4 Short Course Truck. **Not compatible with the original EB/NB/SCT410 vehicles.** ...

These are the optional Left and Right Trailing Spindles for the Tekno RC EB48.2, EB48.3, ET48, ET48.3, NB48, NB48.3, NT48, NT48.3. FEATURES Molded...

This is the 2.1mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to...

This is the 2.0mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to...

This is a package of ten M3x3mm Set Screws from Tekno RC. FEATURES Steel construction, black in color INCLUDES ...

This is the optional Adjustable Rear Outer Hinge Pin Brace for the Tekno RC EB48, EB48.2, ET48, NB48, NT48 and SCT410 vehicles.     FEATURES ...

This is a package of four M4 Locknuts from Tekno RC. FEATURES Aluminum construction, gun metal gray in color Nylon inserts Grooves cut into rear...

This is a package of ten M4 Locknuts from Tekno RC. FEATURES Steel construction, black in color Nylon inserts Grooves cut into rear flanged area to...

This is the 2.7mm Front Sway Bar for the Tekno RC EB.3, NB.3, SL and SCT3. FEATURES Prebent steel construction Diameter determines resistance to...

This is a pair of Rear Suspension Arms for the Tekno RC EB and NB48 Buggies. FEATURES Extra tough composite plastic construction ...

This is the 40T Rear Differential Ring Gear for the Tekno RC NB48 Buggy. FEATURES CNC machined hardened steel construction ...

This is a pair of Tekno RC 15° Trailing Spindle Carriers. FEATURES Stock spindle carriers on the Tekno RC EB48.3 and NB48.3 Also can be used as...

Product Description Replacement clutch nut for the Tekno RC V3 Brushless Conversion Kits. Can be used with any Traxxas engine as well.

FEATURES: Composite plastic construction INCLUDES: Four 12mm Wheel Hexes

EATURES: Steel construction Stock replacement for broken or damaged servo saver springs INCLUDES: Heavy Duty Servo Saver Spring  

FEATURES: Steel construction Fits front or rear suspension 2.8mm diameter INCLUDES: Front and rear Swaybar

FEATURES: Steel construction Fits front or rear suspension 2.3mm diameter INCLUDES: Front and rear Swaybar

FEATURES: Steel construction Fits front or rear suspension 2.6mm diameter INCLUDES: Front and rear Swaybar

FEATURES: Steel construction Fits front or rear suspension 2.5mm diameter INCLUDES: Front and rear Swaybar

FEATURES: Hardened steel construction Snap ring retains the drive pin INCLUDES: Two Snap Rings

FEATURES: Steel and aluminum construction INCLUDES: Linkage Rod Two Set Screws Two Linkage Rod Connectors Two Spacers

FEATURES: For the steering posts of the Tekno RC SCT410 and EB48 INCLUDES: Four 6x10x3mm Ball Bearings SPECS: Inner Diameter: 6mm Outer Diameter: 10mm Thickness: 3mm

FEATURES: Optional Ackermann plate for the Tekno RC EB48 buggy, stock replacement for the SCT410 short course truck Composite plastic construction INCLUDES: Tekno Composite Ackermann Plate  

FEATURES: Plastic construction INCLUDES: Two Sway Bar Mounts, six Bushings and four Inserts

FEATURES: Constructed of aluminum, gun metal gray in color INCLUDES: Servo Saver Post

FEATURES: Hardened steel construction Holds diff gears in place inside diff case Use with the #TKR5150 Diff Gears INCLUDES: Six Differential Cross Pins

FEATURES: Hardened steel construction Threaded on each end to dial in positive or negative camber INCLUDES: Left and Right Front Camber Links

FEATURES: Steel construction INCLUDES: Brake Bias Adjustment Turnbuckle  

FEATURES: Aluminum construction for light weight Anchors brake and steering linkage in place Non-flanged INCLUDES: Four 5.8mm Aluminum Pivot Balls  

FEATURES: Replaces worn or broken servo saver components INCLUDES: Servo Saver Nut, Spring and O-Ring

.

FEATURES: Steel construction INCLUDES: Four Steel Brake Pads for the Tekno RC EB48 Buggy

FEATURES: Plastic construction, black in color INCLUDES: Left Side Battery Tray and Mud Guard